Question about Frigidaire Dryers

1 Answer

Frigidaire affinity dryer has power but won't start up the cycle

I have a dryer that has power (i checked power cord and it's plugged all the way in) that won't start any cycle. the lights come up showing power, but it makes some sound like it wants to start but won't spin at all.

Posted by on

  • ewilliams2 Jan 21, 2009

    Thanks for the feedback. Where do you access this fuse from, and where can I buy a Thermal Fuse to replace the bad one? I am assuming that is on the backside of the dryer somewhere, correct? Please advise. I appreciate the help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 163 Answers

Hi!!! you have a problem with the thermal fuze change it and you will be okay..


frigidaire affinity dryer has power but won't star - 0c2d107.jpg

Posted on Jan 21, 2009

1 Suggested Answer

heatman101
  • 43501 Answers

SOURCE: I have a Frigidaire Affinity

Hi, Sounds like you hooked the cord up wrong... tripped the breaker...fix the cord and reset the breaker...
Here is a tip that will help you with changing your dryer plug. Dryer Cord and Wiring Dryer 3 Wire or 4 Wire



heatman101

Posted on Jul 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire affinity dryer code ad


Hey Cindy, thanks for your submission!
I see that your Frigidaire dryer is displaying an error code of "ad". The "ad" error code will display with the "Auto Dry" cycle has been selected. If you did not select the auto dry cycle I would suggest performing a reset on your dryer and you can do that by disconnecting the power cord for at least ten minutes. Once power has been restored to the dryer and if the error code is still persistent you may need to have a replacement control panel or wiring harness installed. I would recommend having electrical parts replaced by a professional technician this will prevent any personal injury. Best of luck! -Matt

Mar 08, 2016 | Frigidaire Dryers

1 Answer

Cant open the front door seems like its locked


My frigidaire affinity dryer displays LOC - Fixya

www.fixya.com/support/t4561247-frigidaire_affinity_dryer_displays_loc
my frigidaire affinity dryer displays LOC and will not allow me to press any buttons what does that mean? please - Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer question. ... Hi i have a front load frigidare dryer and it displays the cycle time when you press start but it blinks back & fourth to loc & whatever cycle its ... Open Questions:.

Nov 23, 2015 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer

1 Answer

Have a affinity front load dryer that comes on runs five min then shuts off and all three lights by the start button come on and flash wont heat up


Hi Friend, this is Z. I appreciate your inquiry!

I interpret that you are having trouble with your Frigidaire dryer (FASE7073NW) not starting. Let's try resetting your dryer by flipping the household circuit breaker to the off position. It is necessary to wait roughly ten minutes and then turn on your dryer. Confirm that the door is securely closed and select a cycle. If resetting the power does not correct the issue, I have identified that it could potentially mean a number of things: a potential wiring failure, damaged cord, faulty door latch assembly or control board. Because it could be a number of any one of several underlying causes, I would personally contact a professional to accurately diagnose your dryer to determine the root cause to reduce the risk of unnecessary parts. Best regards!

Aug 21, 2014 | Frigidaire Affinity FASE7073NW 27"...

1 Answer

My frigidair affinity dryer wont start it just beeps


Good Afternoon Friend,

I understand that your Frigidaire Affinity dryer, model# FASE7073NW, will not start and just beeps. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your dryer status has changed successfully. Hope this is helpful.

-Best regards-
WP

Jun 01, 2014 | Frigidaire Affinity FASE7073NW 27"...

1 Answer

Agq6000es2 frigidaire affinity gas dryer comes on the ingniter glows but the gas does not lite


Hello Tim, I understand the dryer comes on but will not heat. Let's try resetting the unit by either unplugging it or flipping the household breaker to the off position. Wait approximately two minutes, turn on the dryer and select a normal cycle. If these troubleshooting steps prove ineffective, you may wish to contact a professional as the unit may possibly have a defective cord, wiring, power supply, control board or door switch. In this case the service can accurately diagnose the dryer to determine the root cause to reduce the risk of unnecessary parts.

Aug 13, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer

1 Answer

Frigidaire Affinity AEQ6700FSO electric dryer does not heat, then shuts off within 10 minutes.


Hello Scott Joseph Brandt - Since you have already replaced the thermal limiter check your breaker or fuses. Some dryers are run by two separate fuses, one for power and one for heat-ours is. If it is not the power source more than likely the issue lies with your heating coil.

Feb 05, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

1 Answer

Have a Frigidaire Affinity dryer giving me a code E51. What does code mean


You are experiencing a motor relay failure. A professional needs to complete the following - If motor runs continuouslywith power applied, check for short circuit across motor relay (RL2), or L1applied to motor relay output (J3-1) with cycle stopped. If motor does notstart when Start key is pressed, check for open circuit between L1 and motorrelay connection (J3-2). If no wiring problems found, replace Main ControlBoard.

Jul 22, 2012 | Frigidaire FASE7073LW Affinity 7.0 cu ft...

1 Answer

(2007) Frigidaire Affinity Gas Dryer won't shut off


mybe the star button stay stuck and the dryer tinks some one is puching the star button and it will continio to run. try to open the door and it will stop and then clouse the door if the dryer star whitout pushing the star then you now the star switch is stuck. goo lock

Feb 21, 2012 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer

1 Answer

I have a Frigidaire Affinity front load dryer that will not come on at all. The lights won't even come on. We had to change the cord out to a 4 prong and when we plugged it in it surged. What could...


Hi, Sounds like you hooked the cord up wrong... tripped the breaker...fix the cord and reset the breaker...
Here is a tip that will help you with changing your dryer plug. Dryer Cord and Wiring Dryer 3 Wire or 4 Wire



heatman101

Jul 10, 2011 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...