Question about Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

Open Question

Dishes not getting clean in a whirlpool dishwasher model # DUB700xy-1

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 677 Answers

SOURCE: Whirlpool gold dishwasher leaves film on dishes

the problem is hard water i bet. there is a new product out that actually filters the water going into your dishwasher. this i think is awesome becasue who knows whats in the water cleaning the dishes you eat and drink with. my dishes use to be white and spotty and after the first load with the filter they came out spotless. you can get it at www.dishwasherfilter.com. you will be glad you did. oh it goes under the sink and is small and affordable.

Posted on Jun 01, 2008

  • 188 Answers

SOURCE: Dishwaher does not clean, upper rack

The top rack is not cleaning because of low water pressure from the wash motor to the upper spray arm.
Assuming the top spray arms are clear of debris, remove the lower spray arm to access the wash motor. Remove the 4 torx screws and the filter (accumulator assembly). Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the chopper blade, reach inside the "D" shaped opening on top of the motor and spin the wheel/motor by hand in each direction to make sure either the chopper gear or the motor gear that drives the chopper is not broken. Replace the chopper if necessary (part # 8268383). If the motor gear is broken, replace the sump and motor assembly (part # 8535150). Remove any debris from the sump area in the process.
You don't have to shut the power off to the dishwasher because the door will be open, but if you feel more comfortable, do so.
Good luck!

Posted on Mar 13, 2009

  • 1 Answer

SOURCE: dishwasher is not getting dishes clean. Water is

follow this link:
http://www.fixya.com/support/t2390397-dishwasher_acts_up

that guy gave me some good advice!

Posted on Jun 30, 2009

wiringlunati
  • 576 Answers

SOURCE: whirlpool du1055xtsq 3 not cleaning top rack of

In my experience, you probably have a clog in the spray arm/arms for the top rack. Take the arm(s) out and see if the holes in them are clogged. Rice, plastic wrappers, and glass from dishes that broke in there are the most common culprits I've seen.

Posted on Nov 25, 2009

  • 1 Answer

SOURCE: Maytag Quiet Series 100, Model # MDB5600AWS, built

We also have a Quiet series 100 and had the same problem, the dishes always came out dingy or with food all over them. My washer is about 5 years old and worked well for about 4 of them but the last year has been doing a poorer and poorer job washing the dishes. I finally broke down and removed the racks and all of the plastic parts from the inside of the washer. Doing this revealed that the groves in the under side of most of the plastic parts was clogged with food and debris. After a good scrubbing with water and a brush then reassembly it worked like a new washer again, cleaning the dishes very well and the best part is it saved us about $700.00 for another washer.

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool dishwasher (GU980SCGB3)will not drain. Wash cycle works fine. Water will not drain when the cycle is finished.


Whirlpool Dishwasher Won't Drain - Model GU980SCGB3 ...

www.repairclinic.com/...Dishwasher/...-/Whirlpool-Dishwasher-won-t-dr...
My Orders. Login · Order History · My ... Whirlpool Dishwasher Won't Drain.GU980SCGB3 ... Dishwasher not draining, wont' start or not cleaning dishes properly? This video provides ... how to access... Show all parts for model GU980SCGB3 ...

Nov 04, 2015 | Whirlpool 24 in. GU980SCG Built-in...

1 Answer

Whirlpool dishwasher model series 980 doesn't clean dishes as good as it used to


Phosphate was outlawed as an ingredient in dishwasher detergent. If you live in a region with hard water, detergents don't work very well anymore. See the US map of water hardness.
http://www.citriclean.net/why-citriclean/

Mar 19, 2013 | Whirlpool Dishwashers

2 Answers

The water does not get hot enough. I think it's the reason why dishes are not coming out clean. In normal conditions do I need to wash the dishes (like the manager of this apt. complex suggests) before I...


No you need not wash the dishes but just cleaning of the debris and then putting it in the dishwasher for proper cleaning will help you to prevent the drain from getting blocked.

First perform a vinegar cycle wash in the dishwasher. Pour a cup of vinegar into the bottom of the dishwasher. Keep the temperature at the highest setting possible and perform a wash cycle.Then start using a dishwasher most probably that would solve the problem. If this does not solve the problem then there must be some parts worn out or faulty creating the problem.

There are many probable causes of failure .

To clean the dishes the water temperature is essential.It the water is not hot then the dishes will not be cleaned properly.So check the water temperature.

Also check the filter in your dishwasher.Clean the filter if there is accumulation of debris in the filter.

Feb 22, 2011 | Whirlpool Dishwashers

1 Answer

Dishes are not getting cleaned


Hi,
Check your heating element..

Dishwasher2_bing.gif Problems The Heating Element not Working
http://www.fixya.com/support/r4589033-dishwasher_problems_heating_element_not

Dishwasher2_bing.gif Maintenance
http://www.fixya.com/support/r4319937-dishwasher_maintenance

heatman101

Asker's Testimonial " expanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes

Jul 22, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Built-in dishwasher Model DU8700XB -O


Most dishwashers have a soil separator which separates the soil from the water while it's washing. When a wash cycle is over a valve opens in the separator to allow the soil to go down the drain. If it's not working properly the washer will leave a film or food particles on the dishes.
It's under the lower spray arm. Post your model number and I may can find a diagram for you. Dishwasher- Inside the doorjamb on the top, left or right. On the door edge top left or right. Portable models on the back.

Mar 22, 2010 | Dishwashers

1 Answer

How do you change the front color on model # DUB700xy-1 Alex Templeman aplaide1@pemtel.net


the side brackets have screws and when removed the panel will slide out, some have different color on back, or take outside and paint with an epoxy appliance paint.

Mar 11, 2010 | Whirlpool Dishwashers

1 Answer

Salty white dishes


Pour white vinegar into the rinse cycle, this should help.

Apr 12, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Our less than 1 year old Whirlpool dishwasher model DU1145XTPQA is taking as much as 2 and 3/4 hrs. to complete the entire dishwashing (normal)cycle. This is much longer than it used to take.


Contact Whirlpool service immediately to get a service call scheduled before the warranty expires.
Most dishwashers that begin taking longer to complete the cycle have a failed heating element but that also normally means that the dishes do not get fully clean and the glassware has a film on it after the cycle ends.
Good Luck!

Apr 07, 2009 | Whirlpool 24 in. DU1148XTP Built-in...

1 Answer

How do you fix a noisy whirlpool dish washer DU1100XTP(Q) ?


A hard object has entered the wash module (on some models).
When the object is ground up, the sound should stop. If the
noise persists after a complete cycle, call for service.

Mar 12, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Food particles left on dishes. Whirlpool quiet partner 1


You do not have to take it apart to clean it. You can run it a couple of times with dishwasher tablet and it will self clean. In general I recommend rinsing the food off of the dishes and silverware before placing items into the dishwasher. Also, run the hot water in the sink until it gets hot and then turn on the dishwasher. good luck with it.

Jan 27, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool DU943PWK - Multiple Color Built-in Dishwasher Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...