Question about SVA-USA VR30 30 in. HD-Ready LCD Television

1 Answer

SVA 2400 Monitor Problems

Hello. We have a problem with our SVA 2400 monitor. It works very well but does not turn on right away when the power button is pressed...it's hooked up to a computer and when the tower is on already, the monitor takes a good 5 minutes to flicker on. It acts like it is in a "sleep mode" or something. It also is never adjusted in the center and we always have to press "auto adjust" whenever it is turned on. Thanks for any help you can give!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Hello
1 debronche the internet cable then press off and see if the problem if it is not
2 search in the system
3, you can have a technical problem in your TV
if you guarantee
Contact the store business was purchased at the

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 55 inch vizio flat screen. it turns on but the screen fades away.


//If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Check the cables, connectors and connections.
Take it to a repair shop.

Apr 22, 2014 | Sanyo DP50747 50 in. Plasma TV

1 Answer

RCA flat screen TV turns off by itself and won't turn back on


If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Check the cables, connectors and connections.
Take it to a repair shop.

Apr 13, 2014 | RCA L22HD41 22 LCD TV

1 Answer

Screen won't turn on


You can try to do the monitor self test.
Monitor Self Test:
1. Physically test the monitor autonomously from the computer.2. Switch both the monitor and the computer off, and then disconnect the VGA cable le from the computer.3. Turn the monitor on, pressing the power button for about three seconds. The self-test screen will come up .4. If the image is clear, bright, and shows red, green, and blue, the monitor is working properly. Video issues may be due to the video resolution in the computer, and not the monitor.5. If the image is not apparent and intense or the colors are not accurate, then the trouble is with the monitor or some of the (OSD) settings. In this case, test your particular monitor's information for OSD.
It is always important to check the color of your power light for so you can distinguish if the monitor is defective. Getting red lights on the the power panel states that the power section of the monitor is faulty.

Dec 03, 2011 | Emerson Flat Panel Televisions

1 Answer

My sva lcd (vr-2600w) recently will not power on. The red light in the corner is still lit up red, but when I push the power button it doesn't turn on. I've already replaced the power board almost a year...


Right now you only have 5vdc standby power supply working. It can be the main board, power supply module (bad DC filter caps). You need to open it up and do in-depth troubleshooting.

Basic LCD monitor and LCD TV troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV, Monitors, Caps : http://s807.photobucket.com/home/budm/allalbums

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitor kits: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Please post back what you find.

Nov 05, 2010 | SVA-USA VR-3200W 32 in. LCD Television

2 Answers

Tv does not turn on.... red light on screen does not change to green. Remote control does not work. Checked power supply and green light is lit up


Check the power supply board,for dying capacitors.These capacitors alway bulges up on it tops or puffing up on it tops.These capacitors are dying and not giving the right voltages to the tv anymore.U have tools like a soldering iron,desoldering pump or desoldering braid and solders?U know,how to do basic soldering?Check and replacement of these bulges up or puffing up on it tops dying capacitors.The tv,will work again.

Oct 14, 2010 | SVA-USA VR-30W 30 in. LCD Television

1 Answer

Monitor problem


Hello Iceage, hi, problem is within your power supply section on the LCD. cannot be specific, but normal repairs usually replacement of large value, and large voltage rating capacitors, especially ones were the cathode is connected to ground. check also for the switching power transistors, usually they are MOSFET. you can either do it yourself, but you need the expertise of electronics, or get professional help.

Apr 15, 2010 | Flat Panel Televisions

2 Answers

Magnavox 15mf605t/17 15'' LCD HDTV won't turn on


Have similar TV. If it is set to the PC source, it goes into standby when there is no signal, like a regular monitor. Even though the monitor is in standby, you can still press the Source button to change to, say, HD input, and will use the familiar on/off action when pressing Power on the remote.

A little weird, but I've gotten very used to it.

Mar 15, 2009 | Philips Magnavox 15MF400T 15 in. LCD...

1 Answer

SVA POWER SUPPLY


Wehave identified a common problems with theses sets manufactured by,SVA, Gateway, Viewsonic, Sampo and a few other brands. They all have aSamsung power supply board (LJ44-00025A), which has cause these unitsto lose power. There is a easy fix, replace the power board. But youask why should we? That's the right question. If these boards all havethe ability to fail with various parts and within various displays.This has to be a defective part. As of now, there is no recall on thispart. Therefore, we are generating a list of customers, who own thesedisplays and are requesting a refund for previously purchased parts ora replacement part at no cost to the customer. We are in the prelimary stages, so please be patient with our efforts.

Ifhave indentified your unit is salvage by an power issue an wish topurchase the indentified part (LJ44-00025A, we recommend you purchasefrom http://www.adc-ast.com/.

We cannot guarantee that any monies will be refunded by this claim.

Thanks
Shawn Moffett
Samsung Claims Administrator


If you are interested in participating in this claim, please email the requested below to samsung.lj4400025a@yahoo.com

<NAME>
<ADDRESS>
<PHONE>
<EMAIL>
<MODEL>

Feb 23, 2009 | SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready...

2 Answers

SVA TV


Was it working befor you got it off your friend???

Apr 20, 2008 | SVA-USA HD4208TIII-VR 42 in. Plasma...

1 Answer

Cannot Turn on Monitor and Standby Red light is gone


If the power cable and power outlets are working and the TV still won't power up, then there's nothing much you can do. The power supply unit in your TV is blown. You'll have to get it replaced.

Jul 26, 2007 | Sceptre X37sv-Naga 37 in. LCD Television

Not finding what you are looking for?
SVA-USA VR30 30 in. HD-Ready LCD Television Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top SVA-USA Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Al Clark

Level 2 Expert

290 Answers

Tony

Level 3 Expert

2598 Answers

Are you a SVA-USA Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...