Have you an owners manual for JVC HR-S8850 SUPER VHS
SOURCE: Instruction Manual JVC HR-J425
You need the remote working to get at the on-screen setup menus. make sure the remote is set for the VCR (VCR button) and try the menu button. Are you sure this is the right remote for the VCR. May have to get a new remote. Make sure it is a universal that has a MENU button.
SOURCE: JVC HR-S5902U / HR-S5912U S-VHS VCR POWER PROBLEM
Same problem with my HR-3911U after a power spike. Cracked open the box and as I suspected the fuse had blown. Removed fuse, plugged in and tested across connectors, 115v ac good reading. Replaced fuse (1.25a 250v) plugged in and nothing. The deck electronics had fried. Keeping for spare parts such as head and transport mech.
Time to get a new one and a better surge protector. My UPS logs show a 1200+v spike the day it died. We had storms all around us and thunder in the distance, but nothing close by and no rain, but the spike still made it to our inadequate surge protector.
I've read a lot of forums where other JVC owners have experienced the same problem. It appears to be inherent to these JVC Vcrs.
G
SOURCE: JVC HR S8000U S-VHS VCR switch from stereo to mono during playing.
it is a tape head problem it is already near to run out,replace it with a new one,so it will back to normal..
hope this may help;
SOURCE: EMERSON VHS VCR 4000 OWNERS MANUAL
www.usersmanual.com. last I knew it was free.
you're welcome!
SOURCE: i have a JVC HR-J610U VHS VCR cannot set tracking
On the VCR its self hold in the + and - buttons to set the tracking manually.
104 views
Usually answered in minutes!
×