Question about Poulan PP4218AV 18" Chain Saw

Open Question

Need a diagram on carb plummigform tank to carb

Carb pluming diagram

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of fuel line from tank to primer to carb


Hi Connie and Chris.
I don't have a diagram handy, but the flow sequence usually is
Tank to
Carb to
Primer to
tank return
The idea is that the primer sucks fuel through the carb.
Hope this helps.

Jan 27, 2016 | Garden

1 Answer

Carburator diagram for top of tank.


The ring and spring are under the diaphram. After the screws are removed, tilt the carb and a pop will be heard when the carb is separated from the tank. The spring and clip set in the top of the tank.. Ring on the top of the spring.

Sep 01, 2014 | Briggs & Stratton Garden

1 Answer

Pulsa-jet adjustable carb I need a diagram


I'm not able to post a diagram,but I can give you some info-you'll need to-replace the rubber diaphram/gasket if it hasn't been replaced in the last 2 years remove the hi &lo speed needles,give it a cleaning with spray carb cleaner,put it back together,start with needles 1& 1/4to 1 1/2 turns out.it's a basic,simply designed carb.Ah for the good old days!Find a chiltons small engine repair manual for a diagram
.[hint] start w/a full tank

Jan 22, 2013 | Garden

1 Answer

Diagram for fuel line routing for a poulan 2150 chainsaw?


The 2150 has a remote primer, so there will be three pipes, the pipe coming from the fuel tank with the fuel filter on the end is the main fuel tube, this fits to the connection on the carb nearest to the pump cover on the carb ( alluminium cover held with a single screw ) the other connection on the carb has a pipe to the shorter of the two connections on the back of the primer ( suction side ) the longer connection on the back of the primer ( pressure side ) has a pipe back to the fuel tank, so the primer pulls fuel from the tank, into the bulb, and dumps it back to the tank, it does not push fuel into the carb, this way you can depress the bulb as many times as you like without flooding the engine.

Jul 05, 2012 | Poulan Pro Chain Saw 46cc 20"

1 Answer

Need to know how gas lines go on a RGB3100 they rotted off need to see a diagram


I don't have a diagram, but I can explain to you the fuel line routing.
The small diameter line out of fuel tank (has filter in-tank on end) connects directly to the side of the carburetor that has the fuel pump....that is the cover without the hole in it. Other larger diameter fuel line out of tank connects to the longer nipple on the external purge/primer bulb. The bulb "pulls" fresh fuel from the fuel tank to the carb and then out of the carb to itself, where it then "pushes" any air/old fuel back into the fuel tank. The remaining larger diameter fuel line in this setup goes from the metering chamber (has cover with writing on it and a vent-hole) side of the carburetor to the smaller nipple on the purge/primer bulb. Again, on the primer bulb, the longer nipple has a line going directly from it to the tank. This is the return line. The shorter nipple on the bub has a line from it going to the metering chamber side of the carb. If the purge/primer bulb is on top of the carb...small line from carb body to small hole in tank with filter. Larger diameter line goes from the bulb on the fuel pump side of the carb to the larger hole in the fuel tank where sometimes the line is held in place with a nylon nipple connector that keeps the line from pulling out of the tank. Otherwise, the line should enter the tank for about 1/2" or so.

Jun 12, 2011 | Ryobi Garden

2 Answers

I need a routing map of the fuel lines for the wildthing 2375


There is no diagram that shows this, however i can tell you where they go, the fuel hose from the tank with the fuel filter on goes to the fuel inlet on the carb, the nozzel nearest to the pump side of the carb ( cover held with one screw ) the pipe from the carb nearest to the metering side ( cover held with four screws ) goes to the suction side of the primer ( short nozzel on primer ) there is then a pipe from the pressure side of the primer ( longest nozzel on the primer ) back to the tank ( just pushed into the top of the tank ), just remenber the primer pulls fuel from the carb, and dumps it back into the tank.

Mar 02, 2011 | Poulan Wild Thing 2375 18" Gas Chain Saw...

1 Answer

Truck has been sitting for 2 years. It will not hold the idle when I try to start it. It has a new battery and I have used carb cleaner in the caborator. It has duel tanks and it had no gas when I first...


What could be wrong can be a big list. The weather conditions for the 2 year period may have caused moisture in the tank. The fuel pump may have dried out and shriveled up. Your truck might need adjustments for the Gasahol that is more common today.

The Oxygen sensors may have to dry out after the gulp of Carb cleaner loosened the carbon on the top end of your motor. Use a product called "HEAT" which is a dryer for the fuel system. You can tell it is working when a plume of steam comes out the exhaust. For now just block the accelerator to a fast idle and let the system have a chance to stabilize.

Mar 01, 2010 | 1986 Ford F 250

1 Answer

Need to replace gas line from carb to tank . How do I get access to carb? Need a diagram.


Diagram not needed? Start by taking apart the cover(s) that surround the carb, there should be a least 4 bolts holding your cover assembly together. Once the cover is off just replace hose with one the same length maybe a little longer.

Nov 08, 2009 | Garden

1 Answer

Statesman Tiller


without knowing if its a briggs and straton or tecumseh engine ( I assume Briggs) the carb is where the throttle and gas line connect to. carb will need to be rebuilt most likely and tank will have to be removed to be cleaned. you can email me and I could do it for you I am in wisconsin kerryjonjon at yahoo.com I am the most reasonable in this area. I could do carb and tank if you want.

Jul 11, 2009 | Garden

Not finding what you are looking for?
Poulan PP4218AV 18" Chain Saw Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...