Question about Audio Players & Recorders

1 Answer

Having problem to charge WristVu watch Battery that has special USB that plugs in Computer and oter end of wire has special 2prone with 4connection that touches the 4gold dot on watch...I pluged sever

It comes with a Camera and u can download and synchranize the time,day,date,digitally and anolog,word time,alarm,and with a small disc 4" with program and synchrinize photos with Imageprogarm for Photos to be download on Watch upto 62 photos

Posted by on

  • pat soni Jan 11, 2013

    I need to correct the supplied USB at one end that is to computer and other end of wire is small pins that touches the 4gold spot on back of watch when I pushed the each end of prone of wire in slot back of Watch.U can also check the picture and wire on line by "WristVU"Photo Watch with quest camera as sold in Package at many sites and Amazon..so pl help,I am still not successful

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can not get the wahch to turn on at all why not

Posted on Oct 31, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: TRYING TO OPEN PHOTO VIEWER, WON'T OPEN

I have my key chain completly charged and the software downloaded and when I plug into the computer it says updating like ie is supposed to but then I can't into my pictures to download them onto the key chain

Posted on Dec 30, 2008

VenturerX
  • 31 Answers

SOURCE: iPod Won't Charge

I am assuming that this is the First Gen iPod Touch. My friend had this problem and the way that I fixed it for him is to drain the battery completely, so that it won't turn on. (Even the display shouldn't turn on and say VERY LOW BATTERY with a charge icon).
Plug it into the WALL SOCKET and charge it for 24-48 hours.
If this doesn't work, then the battery is defect. If it is still in Warrenty. Visit the Genius Bar in any apple store and see what they can do

Posted on Jan 01, 2009

  • 2 Answers

SOURCE: i have a goodmans gmp38g6

read the manual

Posted on Jun 21, 2009

  • 1 Answer

SOURCE: MP3 Player won't charge or turn on

ok.. put Hold on , reset then play :D itr will turn back on

Posted on Jul 01, 2009

MaMa Jams
  • 94 Answers

SOURCE: digital photo album keychain and cannot figure out

If your computer recognizes the DPA as an external drive you should be able to drag & drop the photos of your choice to the device.

Hope this info was helpful to you. Good Luck!

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an ipod model a1199. i was wondering if you can use a newer ipod touch charger for it? and if not what kind of charger does it use?


Charge an iPod Nano Without a Charger
If you've misplaced or broken the charger that came with your iPod Nano, you might think you need to purchase a new one in order to continue using your Mp3 player.
However, there is a way that you can continue enjoying your iPod without having to purchase a new charger.
As long as you have a USB cord and a computer, you can charge your iPod without having the charger.

Locate the USB cord that came with your iPod Nano package.
It is the same cord that you use in order to sync or transfer music.
Plug the small end into your iPod Nano.

Plug the other, larger end into your computer's USB port.
Choose "Do Nothing" when your computer presents the dialogue box to let you choose what to do with the hardware or USB connection.
Leave your Nano plugged into your computer for at least 4 hours to charge.
Unplug your iPod Nano when charging is complete.
Charge an iPod Without the Charger
Many iPod owners purchase a charging unit that plugs into a standard wall outlet to recharge the iPod's battery.
However, the iPod wall charger is not included with new purchases, so consumers must either purchase a separate charger or find a way to charge their iPod using other means.
Here's a simple method to charge your iPod using your computer.

Plug the iPod USB cable into the bottom of your iPod.
Plug the other end of the iPod USB cable into a free USB port on your Mac or PC computer.

Open the iTunes program by clicking on the icon in the Dock on a Mac or using the Start menu on a PC.
Click on the name of your iPod under the "Devices" heading in the main iTunes window.
Click on the "Sync" button to synchronize your iPod with your computer data.
While the iPod is syncing, the power from the USB port on your computer will charge your iPod's battery.

Unplug your iPod from the computer once the battery is fully charged.
http://www.bing.com/images/search?q=images+of+apple+ipod+usb+chargers+&qpvt=images+of+apple+ipod+usb+chargers+&FORM=IGRE - view=detail&id=8DEA58C0DAF392E29FCB03D9C
This one should be ok.


Aug 05, 2013 | Apple A1199 ipod nano

Tip

Phone won't charge at all? No lights? Fix it here!


Your battery has been depleted past a chargable state.  This is a due to a bad design in the phone that doesn't monitor the battery power state well enough.  It actually allows the battery to be taken under the minimum amount needed to recharge the battery. 

You can fix this, but do so at your own risk.

You can simply purchase a new battery, that will work, just been sure not to let it deplete the battery totally anymore.

Now, on to the fix

-Take out the battery.
-Get any usb cable you can find sitting around. (any usb wire will do, an old printer cable, anything with a usb end that can plug into your computer)
-cut one end of the plug off. You need to leave the side on that connects to your computer. Cut off the side that plugs into a device (printer, camera, web cam, etc)
-Strip the rubber off the wire and expose the wires inside.
-Separate the wires from each other. You will only be using the BLACK and RED wires.
-strip the very end of the black and red wires carefully using a wire cutter exposing the metal wire inside the red and black covering.
-Plug in your home made battery charger to your computer. Careful not to touch any exposed metal, as it will give you a small shock.
****WARNING****
DO NOT UNDER ANY CIRCUMSTANCES ALLOW THE RED AND BLACK WIRE TO TOUCH EACH OTHER
****WARNING****

-now carefully hold the black wire to the negative terminal on the battery (it should be noted with a black circle with a - in the middle). Then touch the red wire to the positive terminal (it will be noted with a red circle with a + in the middle).

Hold the 2 wires there for 20 seconds. Then quickly plug the battery back into the phone, and then plug it into a regular charger. Give it little bit of time, if you've done everything correctly the charge light should come on.

I had to repeat the last step again to get the light to turn on indicating it was charging.

You must not hold the wires to the battery for too long, 20 seconds should do it. You can overload a battery with this trick and actually make it explode if you hold it there too long. You are well within the few minutes needed to detonate the battery due to overcharging by sticking very strictly to 20 seconds.

Just be careful and you'll be fine.

One you get a charge light give it a few minutes in the off position, then try powering up the device and keep it plugged in until you get 100% charge.

Good luck,

Peter




on Oct 02, 2007 | T-Mobile MDA

Tip

Phone won't charge at all? No lights? Fix it here!


Your battery has been depleted past a chargable state.  This is a due to a bad design in the phone that doesn't monitor the battery power state well enough.  It actually allows the battery to be taken under the minimum amount needed to recharge the battery. 

You can fix this, but do so at your own risk.

You can simply purchase a new battery, that will work, just been sure not to let it deplete the battery totally anymore.

Now, on to the fix

-Take out the battery.
-Get any usb cable you can find sitting around. (any usb wire will do, an old printer cable, anything with a usb end that can plug into your computer)
-cut one end of the plug off. You need to leave the side on that connects to your computer. Cut off the side that plugs into a device (printer, camera, web cam, etc)
-Strip the rubber off the wire and expose the wires inside.
-Separate the wires from each other. You will only be using the BLACK and RED wires.
-strip the very end of the black and red wires carefully using a wire cutter exposing the metal wire inside the red and black covering.
-Plug in your home made battery charger to your computer. Careful not to touch any exposed metal, as it will give you a small shock.
****WARNING****
DO NOT UNDER ANY CIRCUMSTANCES ALLOW THE RED AND BLACK WIRE TO TOUCH EACH OTHER
****WARNING****

-now carefully hold the black wire to the negative terminal on the battery (it should be noted with a black circle with a - in the middle). Then touch the red wire to the positive terminal (it will be noted with a red circle with a + in the middle).

Hold the 2 wires there for 20 seconds. Then quickly plug the battery back into the phone, and then plug it into a regular charger. Give it little bit of time, if you've done everything correctly the charge light should come on.

I had to repeat the last step again to get the light to turn on indicating it was charging.

You must not hold the wires to the battery for too long, 20 seconds should do it. You can overload a battery with this trick and actually make it explode if you hold it there too long. You are well within the few minutes needed to detonate the battery due to overcharging by sticking very strictly to 20 seconds.

Just be careful and you'll be fine.

One you get a charge light give it a few minutes in the off position, then try powering up the device and keep it plugged in until you get 100% charge.

Good luck,

Peter




on Oct 02, 2007 | Dopod 838 Smartphone

1 Answer

I have connected my nanomax ipod to the computer and it is not charging.how should i charge it?


Good morning, afternoon, evening or night; whatever time you are viewing this solution post. Thank you for choosing FixYa to solve your problem. So you have connected your Nanomax iPod to the computer and it's not charging like it's supposed to, and you want to know how you should charge it properly? There are two ways you can charge the battery - charging via your Dock Connector to USB Cable, or the Apple USB Power Adapter (which is sold separately). Here are the step by step instructions to charging your and Nanomax.

Using the Dock Connector to USB Cable
  1. Using your Dock Connector to USB Cable, plug the dock connector end to your iPod and plug the USB end to your computer. Make sure the computer you are using has a USB 2.0 port (check your computer's technical specifications to see if it's USB 2.0 certified). Most USB ports on the keyboards of laptops do not provide enough power to perform charging activities. If you have a Docking Station, plug the docking connector into the station and placed the iPod in the station as well.
  2. Make sure your computer is fully awake and not asleep (meaning in sleep mode).
  3. A fully charged battery takes 3 hours to complete. An 80% charged battery takes an hour and 30 minutes. The battery is charging when it shows the charging icon (a battery not fully shaded in green, with a lightning bolt).The battery is done charging when the "fully charged" icon shows (a green-shaded battery with a 2-prong plug showing).
  4. When you are done, disconnect the cable from your computer.
Using the Apple USB Power Adapter
  1. Connect the Alternating Current (AC) Plug Adapter with the power adapter (if connected already, skip this step).
  2. Using your Dock Connector to USB Cable, connect the dock connector end to your iPod and the USB end to the power adapter.
  3. Plug the power adapter into a polarized wall outlet or surge protector outlet.
I think you connected everything correctly, but the USB port on your computer did not have enough power to charge your battery. If that's the case, you will have to find a computer that has a USB 2.0 port on it (like a desktop PC or MAC, or a car adapter charging device) and connect to it, or use the USB Power Adapter (sold seperately). I think this pretty much answers your question. I hope this benefits you the best way possible. Once again, thank you for choosing Fixya as your one-stop solution spot for your problems. Have a good day, evening or night; whatever time you are viewing this, and visit us again the next you need assistance troubleshooting.

Apr 27, 2011 | Audio Players & Recorders

4 Answers

I have purchased a new Dr Who sonic Screwdriver wii controller, unfortunately the instructions were thrown out with the packaging and i am having trouble charging it. I have it currently connected via usb...


Hi, Here is the relevant text as found in the instructions:"Plug the mini USB end of the supplied USB charge cable to the charge socket on the Sonic Screwdriver Remote Controller (SSRC) and other end [ their error, not mine -KP ] of the charge cable to the Wii console. A red LED charge indicator is on when charging. When the battery is fully charged, the red LED automatically turns off. Charge time is between 2 to 3 hours and a fully charged battery has between 6 to 12 hours of playtime.""The Wii Console must be ON for the SSRC to be able to recharge its battery. It will not recharge when the Wii Console is OFF or in Stand-by Mode."" Charging : LED lights up"" Full charge : LED goes out"Hope this works for you. Keith Pyne

Jan 29, 2011 | Computers & Internet

Tip

Phone won't charge at all? No lights? Fix it here!


Your battery has been depleted past a chargable state.  This is a due to a bad design in the phone that doesn't monitor the battery power state well enough.  It actually allows the battery to be taken under the minimum amount needed to recharge the battery. 

You can fix this, but do so at your own risk.

You can simply purchase a new battery, that will work, just been sure not to let it deplete the battery totally anymore.

Now, on to the fix

-Take out the battery.
-Get any usb cable you can find sitting around. (any usb wire will do, an old printer cable, anything with a usb end that can plug into your computer)
-cut one end of the plug off. You need to leave the side on that connects to your computer. Cut off the side that plugs into a device (printer, camera, web cam, etc)
-Strip the rubber off the wire and expose the wires inside.
-Separate the wires from each other. You will only be using the BLACK and RED wires.
-strip the very end of the black and red wires carefully using a wire cutter exposing the metal wire inside the red and black covering.
-Plug in your home made battery charger to your computer. Careful not to touch any exposed metal, as it will give you a small shock.
****WARNING****
DO NOT UNDER ANY CIRCUMSTANCES ALLOW THE RED AND BLACK WIRE TO TOUCH EACH OTHER
****WARNING****

-now carefully hold the black wire to the negative terminal on the battery (it should be noted with a black circle with a - in the middle). Then touch the red wire to the positive terminal (it will be noted with a red circle with a + in the middle).

Hold the 2 wires there for 20 seconds. Then quickly plug the battery back into the phone, and then plug it into a regular charger. Give it little bit of time, if you've done everything correctly the charge light should come on.

I had to repeat the last step again to get the light to turn on indicating it was charging.

You must not hold the wires to the battery for too long, 20 seconds should do it. You can overload a battery with this trick and actually make it explode if you hold it there too long. You are well within the few minutes needed to detonate the battery due to overcharging by sticking very strictly to 20 seconds.

Just be careful and you'll be fine.

One you get a charge light give it a few minutes in the off position, then try powering up the device and keep it plugged in until you get 100% charge.

Good luck,

Peter




on Oct 02, 2007 | Cingular Wireless 8125 Smartphone

1 Answer

Battery charging


If you are trying to charge the gps battery on the computer you will need a usb cable to do this. Plug the usb cable into an empty spot and then plug the other end into the gps. Also note generally the usb cable will need one standard size end and a micro usb connection on the other end. Hope this helps.

Apr 02, 2010 | Garmin nuvi 255W GPS Receiver

1 Answer

I cant get my mda to turn on i hold down the power button for a while but it wont turn on i charged it for 3 days and it still wont work what should i do?


Mda Vario's don't charge when turned off, heres what you do.
cut wire off a usb lead the small end strip the red and black wires, put the red wire onto the posative connection where the battery is it tells you what side is posative and negative on the battery, use black with negative and red with posative making sure that no wires touch the other metal strips in the phone, replace battery plug usb into computer and start up the mda and wait for it to boot. once turned on leave to charge as it will charge through the wires connected to the battery, after 10 to 15 minutes plug in the actuall charger and try to remove usb wires without taking battery out. if that is not possable it is ok as the battery should have enough power to start up once it starts leave to charge and always keep some charge in the phone.

Jul 07, 2009 | T-Mobile MDA

1 Answer

GPS will not charge while plugged into lighter.


try plugging your usb into the computer and the other end into our gps then it can charge instead of having your battery die you dont even need internet.


if this does not work then why not buy a new usb/gps cord it is very cheep goole it if you don't belive me.

Apr 05, 2009 | GPS

1 Answer

Wristvu watch and camera


wristvu how long should i let it chager for

Feb 26, 2009 | VistaQuest VQ-7024 Digital Camera

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5158 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...