Question about Sharp Aquos LC-20E2U 20 in. LCD Television

5 Answers

Program an RCA universal remote control device

My RCA remote control device will not operate my Sharp Aquos LC-20E2U model television,
I tried following the code numbers specified in the manual for the remote, but the TV does not respond.
Please give me step by step instructions along with the proper code to use in order to activate the remote. Thank you.
Charles Bennett

Posted by on

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 356 Answers

 I will be happy to help. 

  1. Turn tv on.
  2. Press and hold tv button on remote
  3. While holding tv button press and hold power(on/off) button, led light shold go off then back on after a coupke of seconds.
  4. Release both buttons.
  5. Aim remote at tv and press the power(on/off) button every 5 seconds until tv turns off.
  6. When tv turns off press the stop button at bottom of remote, that will lock in the code.
  7. Turn tv back on with remote and test all buttons.
Let me know if this helps and please rate this solution. 
Lone99star

Posted on Jan 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

To program your
RCA Universal Remote , you must follow this procedure;

a. Find codes for each device and brand below.

select a 3 digit combination that will work on your TV/Remote settings [ 006, 011, 014, 015, 019, 027, 036, 037 ] this codes will work on type of TV (SAMSUNG) model

b.
Press and "HOLD" CODE SEARCH.

c. Press and release the TV, VCR or Cable button you want to set up.

  • If programming AUX for a device,
  • press and release AUX first and then the device to be programmed (TV, VCR or Cable).
  • When the selected device button flashes proceed to the next step.

d. Enter the three digit code from the TV, VCR or Cable Box code lists.

***
TV 3 DIGIT CODE: [ 006,011,014,015,019,027,036,037 ]
***

e. Release CODE SEARCH.

With the device on, press another button,.

Ex
. CHANNEL UP.
  • If the device responds, no further programming is required.
  • If the device does not respond, repeat steps A to E using another code number from the lists.
Hope this initial info/instructions helps you out.

Thank you for using fiXya.

Posted on Jan 22, 2009

  • micromaster
    micromaster Jan 22, 2009

    for clarification the given code above was for Samsung, sorry for that.

    but anyway, here is the code for;
    SHARP TV
    011
    020
    025
    027
    037
    052
    053
    059
    060

    *** DO steps A to E using another code number from the lists.

    Thank you for using fiXya.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Kakee.... tell him how

Posted on Jan 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Try this link for your codes.

http://www.thompsontv.com/rcarc.html

Good Luck

Posted on Jan 20, 2009

  • Jyackle5
    Jyackle5 Jan 20, 2009

    It will also tell you how to program the remote

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,268 Answers

You need to update the remote control first so that it will have the database for your Sharp Aquos

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have an AQUOS QUATTRON.. SERIES 108852008, MODEL.. LC-60-E 832 U, HAVE NO REMOTE, can i use a universal remote for it and how do i get the code?


The AQUOS TV manual is available at this link. It will give you the operations that the Sharp remote will do.
http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC40_46_52_60LE832U.pdf

You can buy a Universal remote but that will not have all the operations possible.

Remotes One For All Global
The procedure to load the remote code for your TV will be mentioned in the user guide for the remote or you can select from this site depending on which model of remote you buy.

Mainstream 6 URC 7560 One For All Global

you can buy one through ebay
One for All Five Device Learning Universal Remote Control TV DVD VCR...

Sep 25, 2014 | Sharp Aquos Flat Panel Televisions

1 Answer

I NEED THE 4 DIGIT CODE FOR A SHARP LCD TV ON THE GE UNIVERSAL REMOTE CONTROL


0286,0261. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Pull up older posts.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Jul 25, 2014 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

I have a new sharp aquos tv LC 60LE633U. Remote is broken but have a universal Phillips remote anyone know the code ? Help please


Hello
Three digit universal remote codes for Sharp tV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four digit codes are:
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Feb 28, 2012 | Sharp Flat Panel Televisions

2 Answers

My sharp aquos tv suddenly won't change channels. It was working fine a few days ago. We've had it for five years now. Model lc-37d4u The remote allows us to adjust vol and mute but no other functions...


U can tries take out the batteries,pushes all the buttons a couples times,wait awhile put batteries back,see if that solved ur problems.Not the remote is garbage now.Remote control have dead CPU chip or it CPU is short will have some functions lelf,remotes devices are heavily depend on it CPU chip.This can't be repair,because it just a circuit board and a CPU chip about it on the remote control,that it.Try website like Remotes.com to buy an original remote or very close to it.

Jan 22, 2011 | Sharp Aquos LC-32GD4U 32 in. LCD HDTV

1 Answer

No remote to my sharp tv LC-32SB24U need codes to program my remote...


I have a Sharp LC-32SB24U TV, I need the universal code for my universal remote.

Jan 16, 2010 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

1 Answer

How to Operate a sharp TV without a remote control


HOW DO I GET A REPLACEMENT REMOTE CONTROL FOR SHARP AQUOS LC37GA4X

Dec 10, 2009 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

What is the philip universal control code for sharp aquos lcd monitors?


try these
002 013 014 111 502 712 812 813 913 918

if none of them work you will have to try all codes one by one.

Check this link out for more info
http://www.universal-remote.net/philipsmagnavox.html

Good Luck

Jul 29, 2009 | Sharp Aquos LC-19D45U 19 in. LCD TV

1 Answer

The sound goes off intermittently


Forget Sharp's defective speakers. Connect your sound output to powered stereo speakers and disable the internal speakers (look through the TV's menu). The operator's manual explains how to disable the internal speakers. You'll be able to control the sound normally (mute, volume) with a remote control.
I connected my stereo output (2 RCA plugs) to an old boom-box and I get better sound than with Sharp's built-in speakers.

Jun 28, 2009 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

Tv remote controle codes for starchoice 5-in-1 remote (sharp aquos tv)


you might try unplugging the TV and then plugging in again. It worked for me

Nov 17, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

2 Answers

Programming the Acquos Remote


I got a a sharp LC-32D43U and for my motorola cable box i use hte code 31 from jerrold, i take it from the manual and i got it tryin every single code unti i get one that works.

Hope it works for you

Jul 27, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Sharp Aquos LC-20E2U 20 in. LCD Television Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Sharp Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...