Question about Coffee Makers & Espresso Machines

Open Question

Lehman Brothers Silverware Coffee Urn does not heat.

There was O fuse when i opened bottom. All i could see were the 2 Male conductors ( Connectors ) side bye side. Do you know who works on these and what type of fuse i need ? I believe i need some sort of thermal fuse ?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: How to make coffee with 101-cup percolator urn (Regalware)?

Simply fill with COLD water to the number of cups desired.
Place the stem and basket in the pot and put one 8 oz cup of coffee for every 20 cups of water into the basket...when doing 100 cups I add an extra 12 oz of coffee for a good coffee flavor.
Place the perforated lid on the coffee basket that is in the pot (if there is a lid--some do not have a lid). Put the cover for the coffee pot in place.
Plug in.
Turn on if there is a switch.
Give these large pots about 1 minute per cup, brewing time...that is a little over an hour usually to brew 100 cups. The coffee maker will percolate with the water coming up through the stem and over the coffee as the water heats. Usually there is an indicator light that comes on when it is finished.

If holding the coffee for awhile, it tastes best if you remove the stem and basket and it will maintain the heat without doing more "perking" and becoming stronger or bitter.

Be sure to wash it out and dry it well, leaving the lid loose or upside down for storage so that the pot doesn't become pitted. Blessings, Louise

Posted on Jan 15, 2009

  • 68 Answers

SOURCE: Hamilton Beach 40540 Brew Station 40-Cup Coffee Urn, Silver

Try to see your manual.

Posted on May 18, 2009

bugsy33
  • 33 Answers

SOURCE: I have a 42 cup coffee urn. How much coffee do I

42 level scoops not full scoops

Posted on Dec 05, 2009

Lady Spark
  • 51 Answers

SOURCE: How much coffee do I use to make coffee in the 55

use 7- 8 0z cups fresh grounds. Time to brew depends on efficiency of urn. Maybe 15-20 minutes on average.

Posted on Feb 07, 2010

  • 176 Answers

SOURCE: Need pump tube for 55 cup farberware coffee urn.

Hi. Go to repairshack.con. Good luck. bobbyone

Posted on Aug 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the amounts of coffee for Farberware 55cup coffee urn.


Normal rule is 2 ounces of ground coffee per 64 ounces of water.Somewhere about 2 pounds of coffee.

Dec 05, 2010 | Farberware P13 1355 pump stem for 55 cup...

1 Answer

I believe the heating unit is burnt out. where


Hi. Your heating element is NOT burnt out.Since the unit is almost new, I would say someone left it on and the water evaporated and the safty fuse poped . It is a very easy fix, just take the bottom off and you will see the problem. Good luck bobbyone

Jan 04, 2010 | Faberware 10-22 Cup Coffee Urn

2 Answers

My 25cup Farberware urn quit perking coffee can it be reasonbly repaired?


I have the same urn and had the same problem.

There are 3 common causes of lost perk that can be dealt with at home, and cause about 1/2 of the failures with these urns. They are very common when the pots are used rarely or carelessly cleaned after use, and when coffee is ground too fine for perc (drip grind is too fine for perc). As long as the pot is still heating, check these three things:
1) Clean the _inside_ of the hollow stem )that holds the basket and moves the water from the bottom of the pot to the top), to remove all grounds. You should be able to see clearly through it.
2) At the bottom of this stem there is a very small cup that has little holes in it and fits into the little well at the bottom of the pot. Make sure these are completely clear.
3) Scour out the little well so all residue/ grounds are removed and the little cup fits perfectly into the well.

It is the perfect fit of the two that allows the perc-ing cycle to occur.

If the pot is not heating, or these cleaning measures do not work, a local electric repair shop can probably do the repair for about 1/2 the cost of a new urn.

Dec 04, 2009 | Faberware 12-55 Cup Coffee Urn

1 Answer

Coffee leaks out onto counter after brewed. Is there a simple solution to fix this?


The bottom of the urn is sealed with a bright yellow rubbery gasket. As the button is pressed inward by the cup, a sliding lever lifts a valve in the urn. That gasket sometimes splits or wears, or sometimes a grain of coffee gets trapped between it and the valve seat. First try turning the empty urn (only the urn) upside down over your sink and pressing on the little lever under the bottom, while running a strong stream of water directly at the opening. You'll have to experiment to find how to press. That may clear the obstruction. If that doesn't work, replace the gasket. Instructions are in your owners manual.

Jul 30, 2009 | Hamilton Beach BrewStation 47214 Coffee...

1 Answer

What type of powercord and outlet does this dryer require? Electrician installed a 220 outlet.


ELECTRICAL REQUIREMENTS
ELECTRIC Dryer
CIRCUIT - Individual 30 amp. branch circuit fused with 30
amp. time delay fuses or circuit breakers.
Use separately fused circuits for washers and dryers, and DO
NOT operate a washer and a dryer on the same circuit.
POWER SUPPLY - 3 wire or 4-wire, 240 volt, single phase, 60
Hz, Alternating Current.
POWER SUPPLY CORD KIT - The dryer MUST employ a 3-
conductor power supply cord NEMA 10-30 type SRDT rated at
240 volt AC minimum, 30 amp., with 3 open end spade lug
connectors with upturned ends or closed loop connectors and
marked for use with clothes dryers.
WARNING – Risk of Shock. Appliance grounded to neutral
conductor through a link. Grounding through the neutral link is
prohibited for (1) New branch circuit installations (2) mobile
homes; (3) recreational vehicles; and (4) areas where local codes
do not permit grounding through the neutral, (1) disconnect the
link from the neutral, (2) use grounding terminal or lead to
ground appliance in accordance with local codes and (3) connect
neutral terminal or lead to branch circuit neutral in usual manner
(if the appliance is to be connected by means of a cord kit, use
4-conductor cord for this purpose). USE COPPER CONDUCTOR
ONLY. The dryer MUST employ a 4-conductor power supply
cord NEMA 14-30 type SRDT or ST (as required) rated at 240
volt AC minimum, 30 amp., with 4 open end spade lug
connectors with upturned ends or closed loop connectors and
marked for use with clothes dryers.

The complete installation manual is at ftp://ftp.electrolux-na.com/ProdInfo_PDF/Webster/134917700es.pdf

Jan 28, 2009 | Frigidaire FEQ1442ES Electric Dryer

1 Answer

Coffee urn heating element not working


there are 3 or 4 componants inside that could cause the problem.
if you can use an ohm meter, check all of them for continuity.
a switch
overtemp fuse
perk control fuse, or keep warm fuse
element
all should read "short " or almost 0 ohms when the unit is unplugged '

Dec 14, 2008 | Faberware 12-55 Cup Coffee Urn

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Kolbrun...

Level 3 Expert

1194 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...