Question about Zanussi WJD1257W Front Load Washer

Open Question

Zanussi Jetsystem 12 WJD 1257 problem! When I switch it on it allows me to choose any programme and states the time it will take to do it but then it just won't do anything! I can push the start b

The drier doesn't work but that's not an issue I have a seperate one, but the washer has always worked ok until this week for some reason.

Posted by on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Zanussi jetsystem Turbodry 1200

Hi, Ive moved into a new flat, and I have a zanussi jet stream 1400 turbo dry front loader. Of course, no instructions were left on how to use it. I cant seem to get anything but soaking wet clothes, no spin cycle, and certainly no turbo dry.

Can you tell me where I could download a users manual?

Posted on Feb 10, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40

E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

1 Answer

Dryer with no heat

It sounds like an intermitent Thermostat problem.

Sep 02, 2007 | Zanussi WJD1257W Front Load Washer

1 Answer

WJD 1257 works fine but After 1&1/2hrs knocks of the main power fuse even if only on standby. I remove plug, put fuse switch back and all is well until the next time. Have tried the other socket but no...

Try to see the capacitor of your the machine. The capacitor looks like a circle tube of plastic ware where the 4 wires are connected to it. it is only for the washing machine with the dryer. If it's only a washing machine the, the capacitor is only a single or only two wires are only connected. To test if that is the common problem, try to connect another functioning capacitor.

Mar 11, 2011 | Zanussi Washing Machines

1 Answer

Iv got e90 and e91 coming up on my 1200 wjd 1257 w can you help me rob

E90 - communication error between printed circuit boards. check connections.

Nov 01, 2009 | Zanussi WJD1257W Front Load Washer

1 Answer

I have a Zanussi Electrolux Jetsystem Progress ZSF 6161 Dishwasher which, no matter what programme I use, stops after 2 seconds and a -10 flashes.

I have a Zanussi Jetsystem Progress ZSF 6161 Dishwasher stops after a few seconds and flashes -30 Any ideas? thanks!

Jul 28, 2009 | Zanussi Dishwashers

1 Answer

How to clean a Zanussi Jetsystem 1400

on my mums zanussi,, after opening door, machine had not drained and spined, closed door again could not get machine to go,, this time could not get door opened..there is power to machine.

May 19, 2009 | Zanussi Washing Machines

1 Answer

How do you fit a drain hose to a zanussi WJD 1257 W

tilt machine backwards at a good angle.look underneath and you will see that the drain hose is connected direct to the pump and held with a spring clip. just undo with pliers and bobs your uncle

Jul 06, 2008 | Zanussi Washing Machines

Not finding what you are looking for?
Zanussi WJD1257W Front Load Washer Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides