Question about Jenn-Air Pro-Style® JDS9860BD Dual Fuel Range

Open Question

JDS9860BDS problem with the controlboard

3rd time control board has stopped working. Have replaced it 2 other times. Have any other owners of this model had a same problem and is anyone aware of a quality complaint on this model? I need the downdraft which Jenn-Air only sells. I either need to fix it again, or replace it but since this model was 1st sold, the sticker price has gone up quite a bit. I'm trying to weigh out buying a new one that hopefully isn't a lemon like the one I own, or repair it a 4th time for at least 400.00, knowing it will happen again. Any advice?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Jenn-Air Convection Oven

Our 7 year old "Jenn-Air Convection Oven", Canadian Model # SVE47600 also has a very dim display. We can barely read the temperature on the oven. Does anyone know what is wrong, how to fix it, and what it may cost us?

Posted on Jan 02, 2008

  • 1 Answer

SOURCE: Jenn-Air electric range

my jen-Air has a problem with it continuing to beep. Ive tried to get it to stop by pushing all the buttons. When I pust the off/cancel button it just keeps beeping. Tried the stop timer button and same thing. When I turn on either the bake or convection bake button it automatically just shuts off by itself. It is approx 10-13 years old. HELP, or please tell me to get a new one.

Posted on Oct 23, 2008

  • 1 Answer

SOURCE: Jenn Air slide in range JES9750AAB - Touch Pad

put on tree belt . having the same problems replaced ERC $200.00 now they are telling me touch pad touch pad is $240.00 .the stove cost $1300.00. $1740.00 how much more will i have to put in this stove

Posted on Jan 06, 2009

  • 7 Answers

SOURCE: Jenn Air SVE47600b dead touch panel and blower runs constantly

I have had similar problems:
Display was the Part # 71001799 circuit board..$175+labor
Oven blower problem was control relay board, part# 12001689...$224+labor
My solution. replace with non-Jenn Air.
Check Consumer Reports. Jenn Air has high repair history.

Posted on Mar 15, 2009

erpaalai
  • 999 Answers

SOURCE: jenn-air electric range model JES9800AAB some kypad # not working

Unless they start working again after it has a chance to dry out the touch panel will have to be replaced. This happens when excess moisture gets between the very thin layers of the membrane.
eric

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch washer sometimes don't rinse


Have you cleaned out the filter in the bottom and made sure the pump is not blocked?

Apr 22, 2014 | Bosch Washing Machines

1 Answer

Frigidaire ltf2940fe1 error code e52 it says replace either the drive motor or speed controlboard


Hello Amy Taylor - If both the drive motor and speed control board has been replaced, then I strongly suggest contacting a professional to move forward accurately. The washer could be experiencing a wiring failure or communication error with the board, which would need further diagnosing.

Dec 01, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

F8 error code Whirlpool Duet


see this causes and fix it. See yur section troubleshooting in your owner manual, or call some tech.
F8 Board failure Replace control board (also called ERC or clock).

Sep 25, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

We had a new Carrier Weathermaker Infinity Gas Furnace installed in our home on 9-21-99.The Carrier people said the furnace was in good condition this past October.But prior to that as of April 2010 the...


Your Carrier guys more than likely are Carrier dealers. I would get a second opinion. Most qualified HVAC techs can work on any and all brands. It doesn't need to be a Carrier dealer to work on a Carrier. AND, if they replaced the control board and didn't test the heat, that's a fault on their part. Anytime we change a board or even a thermostat, we check ALL modes and functions. SECOND OPINION!!!

Mar 10, 2017 | Heating & Cooling

1 Answer

LG Inverter WM1375HW stop turning on


It's this Damn washer!! It's happen to me 3x. LG controls all their parts.. They cost sooo much and I replaced this board for the 3rd time!! Last one only lasted 4 months and I use it like once every 2 weeks. Curse LG!!

Mar 17, 2010 | LG Washing Machines

1 Answer

Refrigerator temperature control panel not lit. This happened last week but corrected itself....not sure how....but now display panel is off for good, it seems. Main Refrigerator lights are still working,...


Your Refrigerator Has a main controlboard located in the rear of the machine. This Controlboard sends power and reads the user information. if your user display (Temp Control panel) is not working it can only be 2 things The user display or the main controlboard.

As far a the refrigerator working without it, I would not trust it.

The clicking noise is a relay on the main control.
Usualy when I here this relay go on and off rapidly, there is a problem whith the main controlboard.

The big problem with this is why did the main control go out ? some other componet on the refrigerator could be the cause. A comon cause in the past has been the evaperator fan motor.

Jan 15, 2010 | Refrigerators

1 Answer

My GE Profile Artica refrigerator front panel stopped working. On lights on any option. THe refrigerator & freezer appear to be working fine. Model number is PSS25NGNA CC


the front panal is called the interface. this interface has a small controlboard in it that talks to the main controlboard. I would change the interface first but in small ocations the main board would need to be replaced also. the interface part number is
WR55X10390

Jan 07, 2010 | Refrigerators

2 Answers

LG French Door Model LFX 25960--Freezing in right crisper door


Have person who changed out you controlboard come back and recheck connections and controlboard itself.

Jul 26, 2009 | LG LRFD22850 Bottom Freezer Refrigerator...

2 Answers

Error message of f dl on kenmore washer model he 4t


does your washer stop on spin cycle some time. your is 4/5 years old?. f dl means door lock system is bad but i don't think so. do you have other error code beside f dl if yes then i think your washer need new main control board.

May 24, 2009 | Kenmore HE4t 3.8 Cu. Ft. King Size...

2 Answers

Temperature control


hi,pls check your thermostat if this early cut-off, try to replace the thermostat.thank you



edgz

Jan 31, 2008 | GE Profile PSW26P Stainless Steel Side by...

Not finding what you are looking for?
Jenn-Air Pro-Style® JDS9860BD  Dual Fuel  Range Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

969 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...