- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, Mr Justin Becker i think its a power supply problem, first you should try another dc adaptor, if your printer works fine with the new one, you have to replace it or take it for repair.
if it is a DC Adaptor problem it cost about: US $29.74
the HDD (make sure you
backup templates and address book if you use them.) To format HDD hold 0
and 8 while turning on the copier, when the machine comes ready key in
690 and hit start. It will then display "2 2", hit start again.
Wait for it to say please reboot the machine, turn it off and back on.
Hopefully this will work but if not, your HDD will need replacing.
This almost always means the toner cartridge is empty. This is especially true if you can hear sort of a thump noise about every 5 seconds or so. When these toner cartridges run out the machine will still try to add toner. If it does not get it, it will eventually shut down and turn on the red toner light which looks like a stack of 6 dots. Just turn the machine on and let it run. After a few minutes it will shut down and turn on the toner light. If not reply back.
Good Luck and Thank You for using Fixya.