Question about Computers & Internet
Uuplug, wait a few mins., plug in , reboot. Any change? If not, Try a system restore/recovery. Reboot and start The recovery procedure using your F key.
Posted on Jan 08, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I bought two y430s. I've had both y430's go bad, one at 8 months, one at 16 months. Both were motherboards. 1st on warrantied, second was not. $600 pieces of garbage.
Posted on Apr 12, 2010
SOURCE: Laptop Touch Pad will not work
if you plug usb keyboard onto your laptop it will probably turn the touch pad off.
If no other keyboard is attached there is usually a switch to turn off the touch pad.
also if you attach a mouse this may disable the touchpad so you dont move the mouse pointer when you are typing
Posted on Jul 10, 2010
Tips for a great answer:
Jan 11, 2016 | Tablets & eReaders
on Aug 09, 2011 | Apple iPod touch
on Aug 05, 2011 | Computers & Internet
Dec 14, 2015 | Dodge Cars & Trucks
Nov 26, 2015 | Gateway Computers & Internet
Jul 16, 2014 | Gateway One ZX4300-41 (PWGAW02017) 20 in....
Hi Jon Denver, you
did not specify that you are talking about user account password or
administrator account password. In both cases you can use password
recovery software to reset Windows password. You can click (or can
search by yourself)
to get a list such software.
Oct 04, 2012 | Gateway " 21.5"" Touch-Screen All-In-One...
Apr 24, 2012 | Gateway All-in-one Touch Desktop Pc Intel...
*Master reset your Garmin Device:
1.Start with the unit OFF and unplugged from
2.Touch and hold the lower right corner of the
screen with an index finger or the eraser end of a pencil
3.Continue touching and holding the lower right
hand corner of the screen then power the unit ON
4.Release the power button when the device
5.You will see a new message: Do you
really want to erase all user data?
6.Remove your finger from the touchscreen when
this message displays - Touch Yes
7.The device will automatically reset. Please
follow the on screen prompts on the nuvi .
*If the touchscreen is incorrectly detecting
where your finger touches the screen, the screen may need to be calibrated.
1.Power the unit On.From the Where to? and
View map screen, touch Settings . Touch Display>Touch Re-calibrate
2.A new screen will display that says Press
Dot,Touch the Center of the Dot.
>Keep touching the center of the dot as it
moves around the screen.
3.When Calibration Complete appears on the
screen, please touch OK.
The screen will now be Re-calibrated.
*If the screen is not responding to touch, the
device may not have enough power to function properly. Recharge the battery
completely and try again. If the battery does not charge, it may need to be
If the screen is still not responding to touch
commands or displaying properly, the display may need to be replaced. If sound
comes from the device, it is likely the motherboard is working, and only the
display needs to be replaced.
Before replacing the display, check that the ribbon cables connecting the display to the motherboard are connected securely.
Oct 04, 2011 | Garmin Nuvi 660 GPS Receiver
Mar 07, 2011 | Elo CarrollTouch touch-screen Monitor
52 people viewed this question
Usually answered in minutes!