Question about Nintendo Wii Console

1 Answer

Wh have first and third controller. How do we reset the order?

My sister came and she accedently left with player #2.
How can we play with player #1 and #3 on mario and sonic at the olympic games?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 903 Answers

Re-sync the controllers so that they become #1 and #2 you can do this by following these steps

Standard Mode Synchronization
Note: Make sure you have placed batteries in the Wii Remote (how to).

  1. Press the Power button on the Wii console to turn it on.


  2. Open the SD Card Slot cover on the front of the Wii console. Remove the battery cover on the back of the Wii Remote you wish to sync up.

  3. Press and release the SYNC button on the inside of the SD Card compartment on the console. Press and release the SYNC button just below the batteries on the Wii Remote.

  4. When the Player LED blinking stops, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
    wh have first and third controller.  How do we res - wiiremotesynchstandard.gif This procedure must be followed for each additional Wii Remote added to your system.
this information is from http://www.nintendo.com/consumer/systems/wii/en_na/setupWiiRemote.jsp#Synch

I hope this helps

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If i have 12 basket of apple and i give 1 third to my mother and i give 1 half to my sister how much recieve my sister?


12 baskets ... 1/3 to mom and 1/2 to sister ... Sister gets 6 baskets (1/2 of 12) ... mom gets 4 baskets (1/3 of 12) ... you keep two baskets.

Or is your question different?

Sep 19, 2011 | Computers & Internet

1 Answer

Samsung DVD recorder SH855M how do I get it to play multi region? Many thx


Power on player with no disc in tray.

1. Press the Repeat button on your remote control
Don't confuse with the Repeat A-B button

2.If your player was purchased in Region 1:
Press the buttons 2, 9, 3, 3 and 4 on your remote control, in order one at a time
If it was purchased in Region 2:
Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time
For Region 3 players:
Press the buttons 5, 6, 7, 3 and 2 on your remote control, in order one at a time
For Region 4 players:
Press the buttons 7, 6, 8, 8 and 4 on your remote control, in order one at a time
For Region 5 players:
Press the buttons 5, 3, 8, 1 and 4 on your remote control, in order one at a time
For Region 6 players:
Press the buttons 2, 4, 4, 6 and 2 on your remote control, in order one at a time

3. The numbers 01 or similar current region code will be displayed on the top left of your onscreen display

4. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback
NB: The above step may be time sensitive and need to be performed quickly

5. Open your DISC tray and leave open for 15 secs.

6. After 15 seconds have elapsed, power off your player and the DISC tray will be closed and player shut off.

7. Power on player and it is now set to the new region code you chose in step 4 above

Mar 10, 2010 | Televison & Video

1 Answer

Region 1 DVDs will not play on my recently purchased panasonic blu ray. is there any input code to allow play


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__okp9

Dec 01, 2009 | Panasonic SC-BT200 Home Theater Systems....

2 Answers

Samsung P480 dvd player- To Play all region dvds


how can I play *.mp4 files in samsung dvd player model no P480?

Mar 11, 2009 | Televison & Video

1 Answer

Samsung HR733 making multiregional


1. Press the Repeat button on your remote control
NB: Do not confuse this with the Repeat A-B button
2.
If your player was purchased in Region 1:
Press the buttons 2, 9, 3, 3 and 4 on your remote control, in order one at a time

If it was purchased in Region 2:
Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time

For Region 3 players:
Press the buttons 5, 6, 7, 3 and 2 on your remote control, in order one at a time

For Region 4 players:
Press the buttons 7, 6, 8, 8 and 4 on your remote control, in order one at a time

For Region 5 players:
Press the buttons 5, 3, 8, 1 and 4 on your remote control, in order one at a time

For Region 6 players:
Press the buttons 2, 4, 4, 6 and 2 on your remote control, in order one at a time

3. The numbers 02 or similar will be displayed on the top left of your onscreen display
4. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback
NB: The above step may be time sensitive and need to be performed quickly
5. After 15 seconds have elapsed, power off your player and then power on your player

Sep 27, 2008 | Samsung DVD-HR734 DVD/HDD Recorder

1 Answer

I need to change region code for goodmans GDVD200CDGM


Region Code Hack: GOODMANS GDVD-200-CDG:

To convert this player to Multi-Region
1. Open the disc tray.
2. Place a region 1 disc in the tray, but don't close it.
3. Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time.
4. Press the play button on either your remote or the player.

To return this player back to Region 2 only and its factory default settings
1. Open the disc tray.
2. Press the Zoom button on your remote control.
3. Press the Retu To return this player to Region 2 only (alternative method) rn button on your remote control.
4. Your player should now go into Standby mode.
5. Press the Power button on your remote control.
i). Open the disc tray
ii). Place a region 2 disc in the tray, but don't close it
iii). Press the buttons Return and then Play on your remote control in order, one at a time

Aug 21, 2008 | Goodmans Televison & Video

2 Answers

Unlocking zone for samsung dvd-p181


One of these 2 should work.

1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT (do not confuse this with the A-B button) then the following codes for the required region the player is already set to (region you bought the player in) :

Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
("E series M105", M205 and M305 users try: 57538)
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2

6. A code will appear, indicating the region setting of your player.
7. Press 0 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray. You may need to push the tray shut rather than use the player button, in order for the region not to be changed to 4 (M203).
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.
<DVD> ; press DVD button
<0><0><0><0><0> ; enter 5 times 0
<repeat> ; press repeat button (careful, not <repeat A-B>)
<5 digit code> ; see below, depends on region the player is currently set to
<0 for region free, 1-6 for other region> ; select new region
<open> ; open tray
<open> ; close tray
Now power off/on

5 digit code:
region 1 : 29334
region 2 : 37867
region 3 : 56732
region 4 : 76884
region 5 : 53814
region 6 : 24462

Note: reset player by powering down and simultaneously pressing <power> + <play> until display shows 'reset'.

Aug 04, 2008 | Televison & Video

1 Answer

I need to unlock the region code on my Samsung DVD SH853 (region 4) so I can play all region dvds. Any help much appreciated.


Power on player with no disc in tray.

1. Press the Repeat button on your remote control
Don't confuse with the Repeat A-B button

2.If your player was purchased in Region 1:
Press the buttons 2, 9, 3, 3 and 4 on your remote control, in order one at a time
If it was purchased in Region 2:
Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time
For Region 3 players:
Press the buttons 5, 6, 7, 3 and 2 on your remote control, in order one at a time
For Region 4 players:
Press the buttons 7, 6, 8, 8 and 4 on your remote control, in order one at a time
For Region 5 players:
Press the buttons 5, 3, 8, 1 and 4 on your remote control, in order one at a time
For Region 6 players:
Press the buttons 2, 4, 4, 6 and 2 on your remote control, in order one at a time

3. The numbers 01 or similar current region code will be displayed on the top left of your onscreen display

4. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback
NB: The above step may be time sensitive and need to be performed quickly

5. Open your DISC tray and leave open for 15 secs.

6. After 15 seconds have elapsed, power off your player and the DISC tray will be closed and player shut off.

7. Power on player and it is now set to the new region code you chose in step 4 above

May 01, 2008 | Televison & Video

Not finding what you are looking for?
Nintendo Wii Console Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

892 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...