Question about Exercise & Fitness

1 Answer

Vision Fitness T960 treadmill error code E4 I was going to recalabrat hit start could hear machine turn off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 12,223 Answers

Please proceed according and fix it. See the diagram for troubleshooting and see my personal TIPS for motor help.
"E04": Incline motor wrong, check if the VR of the incline motor connects well or replug it. The
mark of the DC motor and control board should be matched connected. Sometimes you also test the wires from motor and restart the treadmill
Vision Fitness T960 treadmill error code E4 I was  - 1_8_2013_6_30_59_pm.jpg

Posted on Jan 08, 2013

  • joanie Jan 15, 2013

    You have error code "EO4" is that the same as "E4" ?

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

guru_fixya
  • 944 Answers

SOURCE: Vision Fitness T9450 Treadmill error code "E4."

Hi,

E4 means
- Elevation parameters out of range
- Recalibrate it

If you want to calibrate it see the manual page no 5.

Click here to download the manual

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error code R5232 Failed mean on Vision Fitness T9600HRT treadmill


If you wish to get some details about treadmill error codes ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Dec 04, 2016 | Vision Fitness Exercise & Fitness

1 Answer

Just bought sole f63 runs data press start nothinges e4 is displayed then not happy


If you wish to get some details about treadmill repair and error codes ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Nov 07, 2016 | Sole Fitness F63 Treadmill

1 Answer

My Vision Fitness T9250 treadmill. Can hear a low noise when no one is on it but gets much louder when anyone is on it and operating...any ideas where to start looking for repairs?


Try to open and separate the motor carefully from treadmill chasis, turn the motor shaft with hand if it not easily turn or you hear a unsual sound try to open the motor and add a lubricant to motor bearing, and turn the motor on if its still noise replace all the bearings with new one

Dec 14, 2014 | Vision Fitness T9250 Simple Folding...

1 Answer

E4 coming up on my screen display , what is this and how do I fix it so it will work again ....


What device are you talking about your stereo ATV a computer or a cell phone?

Most manufacturers have a support site on the Internet and given the error code and the model number they'll give you a solution

Nov 25, 2014 | Vision Fitness T9250 Deluxe Folding...

1 Answer

VISUAL FITNESS t97005 e6 ERROR CODE


LUBE THE deck belt, this happen because lack of maintenance, do ti
2( lube the rollers bearing too
3( test the input voltage motor, if there are the motor need repair
4) test the output voltage board, for input voltage motor, if there are NOT the board is faulty.
God bless you


9_24_2012_12_52_14_pm.gif

Sep 24, 2012 | Dmm Vision Fitness T9500 Treadmill

1 Answer

ERROR CODE E9 VISION FITNESS TREADMILL T9200


If you wish to get some details; check the site linked here. Pull up older posts treadmill . http://electro-medical.blogspot.com/ Surf the site with patience.

May 08, 2012 | Vision Fitness T9200 Premier Treadmill

1 Answer

What is error code e4 on vision fitness t9350?


I have an HRT9450 that is showing an E4 error code - but when I run the auto calibration it doesn't seem to finish.

It runs up the speeds and back down but then stops without ever showing 'end'.

When i then take the safety key off and replace it the E4 error code shows again.

The treadmill was working fine until I moved it a foot and then the error code shows - meaning I'm suspecting a lose cable but I don't know where to start looking for it.

Any advice?

Feb 18, 2012 | Exercise & Fitness

1 Answer

I have a vision fitness treadmill. I turn on the treadmill and it starts at P1 and then it automatically goes through all the programs and sppeds until it gets to 10 miph. I have tried unplugging it. I...


It sound like either the function pad ( more likely the problem ) or the upper electronics have failed. You will need to call Vision Fitness customer support @ 1-800-335-4348

Jun 11, 2010 | Vision Fitness T9550 Folding Treadmill

3 Answers

Treadmill (Vision Fitness T8500) turns on, motor doesn't run...


open motor shroud and inspect all connection on the motor control board see if all LED 's are lit except that light up when incline motor is moving up or down. then check the two connector coming from the drive motor to the board sometime over time the two connector will have a cold soldier I would move them to see any excessive movements of the pins then hit start and see if there is any belt movement. Last but not least unplug unit and check the motor brushes if they are less than 3/8 in in length replace them. Call them @ 1-800-335-4348 they under their parent corp. Johnson fitness.

Feb 28, 2010 | Exercise & Fitness

1 Answer

Lites on control board read ( L 5 ) when machine is turned on.


the e1 symbol is an engineering error code for an electronics malfunction (actually is senses the motor not turning and giving an error. The most likely cause is the motor control board
www.twincityrepair.com

Mar 02, 2009 | Landice L7 LTd Pro Sports Trainer...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

33282 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...