Software from cd makes my computer go into restore

Hi sam,
Asus drivers can be downloaded from this site: Driver Update Software for XP Vista 7 8
wish you best of luck
David

Normal 0

You can download the drivers from ASUS WEB site. Select your model motherboard/computer/laptop, and make sure you select the Windows XP or Vista version of the drivers that matches your Windows operating system. Please click on this link to their WEB support site : -
http://support.asus.com/download/download.aspx?SLanguage=en-us

Go to the manufacturer's support WEB site to download the drivers and software for your model device.

1. Restart the computer.
2. As the computer restarts, press the F8 key until the Advanced Boot Options menu appears on the screen.

Note:
You must press F8 before the Windows logo appears on the screen. If you press F8 after the Windows logo appears, the Advanced Boot Options menu does not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.

3. Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.

4. Specify the language settings that you want, and then click Next.

5. Log in as a user who has administrative credentials, and then click OK.

6. Click Dell Factory Image Restore.

7. In the Dell Factory Image Restore window, click Next.

8. Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.

9. Click Next. The computer is restored to the default factory configuration.

10. When the restore operation is completed, click Finish to restart the computer.

You can restore your Dell Mini using Using Dell PC Restore in Windows XP or Dell Factory Image. You can successfully restore your computer yourself. All you need is to download a manual containing instruction on how to restore. Download the manual from http://support.dell.com/support/edocs/systems/ins1010/en/index.htm
See pages from 37 - 43. You can restore your computer on your choice.
Cheers!

you do not need drivers or software the phone are connect direct to router and you can make phone calls witout computer

Download software and driver here

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=ENG&cat=PC_CAMERAS_CA&sct=WEBCAMS_SU&session=20090729191625_86.0.182.131&grp=PC_PRODUCTS_GR&ctn=SPC611NC/37&mid=Link_Software&hlt=Link_Software

My Canon PIXMA MP500, purchased in mid-2006, came with the (then) ScanSoft OmniPage SE2 software on a CD. The PC had WinXP Installed. I had no use for the ScanSoft it so I made no effort to install it.
Fast Forward:
Two PC crashes later, July 2009. Using Win Vista Home Premium
LOST, important WinWord document file, only a hard copy available.
I tried to recover, scanning the "Xerox" copy. The SE Version of OmniPage was very complicated but I succeeded in producing a replacement *.doc file.

It appears that newer editions of WinVista contain the right printer drivers for this Canon Model.

Download the user's manual also from the website - it will let you know what to do next. I have written an article that you can see in the "Tips & Tricks" section on how to download songs to your Mp3 player using Windows Media Player 11.  Make sure you get the firmware update before using Windows Media Player 11, however: Philips issued a firmware upgrade for this model to correct the freezing issue.  You can't use the version of the Philips Device Manager that came on the installation CD.  You have to go to www.philips.com/support, enter your country, enter your model #, click on SA 6045/37 without the B, and click on the Software & Drivers link.  Within the software & drivers link, you must download the link underneath "Device/Firmware Manager" - this will give you the latest version of the Device Manager.  Using the new Device Manager, connect your mp3 player to the computer and click on the "Update" button within the Philips Device Manager.  This will upgrade your player's firmware, and fix the freezing issue.
-Tha Mp3 Doctor

I also have lost my CD for the Phillips SIC4750/27 we cam. I had my Windows Vista do a search for new harware, it found my cam and indentified it as a Sunplus EZcam III, and my computor installed the driver for it: ver. 1.0.4.8 last updated 08/22/2002, and the camera seems to be working fine with this driver.