Question about Kenwood VR-406 Receiver

1 Answer

I have a kenwood vr 406 and a kenwood rcr0609 remote. After some time, the remote stopped working , so we got a new remote. This worked about a day. The remote itself seems to be working, because I can turn off the tv with it, but it wont operate the kenwood system.

Posted by on

  • mocte_06 Jan 31, 2009

    The control of my Kenwood VR-406 works OK first but then stops working, somebody know what I must do?? or What's going on with that??

  • oldspice2 Mar 30, 2009

    Would you please show the link to fix the VR-406 receiver

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Kenwood receivers recently have a commonly known problem with its receiving IR diode within the receiver, to fix this you will have to re-solder the connection on the receiver panel within the faceplate of your kenwood receiver.

Instructions to fix it are at the following link if you are willing to open up your receiver and repair it. lots of people have reported this fix as successful so it is widely believed to be a design flaw in the VR line-up of receivers as it has occured in all the VR families so far.

good luck.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my VHS sound to work on analog setting


We see no details about your "VHS sound" device (so we can't look at a manual, which you CAN) and how you have it connected. Presumably you're using analog RCA audio cables. THAT would work on any analog input EXCEPT Phono. Nothing complicated about analog sources. Outs to Ins.

Register and download the manual for free at retrevo.com
http://www.retrevo.com/support/Kenwood-VR-406-Receivers-manual/id/480ag201/t/2/

Jul 08, 2011 | Kenwood VR-406 Receiver

1 Answer

Need the 4 digit code for a kenwood vr-405 reciever with my kenwood rc-ro509 remote..stop working?


Hi,
Here are some remote codes for Kenwood Receivers.
The codes are as follows: One of them should work
0027, 0077, 0313, 0186, 0314, 0356

Here is a link to a web site that has universal codes for remotes.
http://www.hifi-remote.com/ofa/codes-amp.shtml#amp

Hope this helps,
Best Regards,
Mark

Jan 27, 2011 | Kenwood VR-405 Receiver

1 Answer

Receiver doesn't respond to any commands from the remote. Batteries in remote are fresh.


Over time the remote can become dirty from spills or potato chip debris.... This can cause the carbon pads to be on and the remote is giving a continuous command, effectively stopping it from working. Take it apart and clean carefully with rubbing alcohol and swab sparingly....

Nov 28, 2010 | Kenwood VR-406 Receiver

1 Answer

I can't get the sub to work, can someone help please??!


I'm a little rusty on this unit, however it is accessed thru the remote controls "Audio" button if memory serves correct. If you still have a problem, post a comment and I will dig out the manual and help some more.

Jun 03, 2010 | Kenwood VR-406 Receiver

1 Answer

Audio Receiver shutting off


check your speaker connections you have a short or wires touching eachother

Mar 14, 2009 | Kenwood VR-406 Receiver

3 Answers

Remote control not working...


I'm not sure of the exact fix, but when these components were assembled a few of the connections involving the remote sensor were not saudered. An easy fix if you know where to look.

Apr 15, 2007 | Kenwood VR-405 Receiver

Not finding what you are looking for?
Kenwood VR-406 Receiver Logo

Related Topics:

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4804 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Eddie Dalton
Eddie Dalton

Level 1 Expert

41 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...