Cannot locate YHI AC ADAPTOR MOD # 090-02180-I3 OR WHERE OR WHOM CAN REPAIR. TRIED TO PURCHASE ONE THROUGH PAYLESS USING PAY PAL BUT PAY PAL PUT A BLOCK ON USING MY CREDIT CARD, CITING UNUSAL SUSPICIOUS FRAUDULENT ACTIVITY. ??? Can you help
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: AC ADAPTOR FOR PROTON 32 LCD
Hi and welcome to FixYa,
To my understanding, any power adapter would serve the purpose as long as the replacement adapter have the same specification as that of the original. Pls confirm, 100-240V 50-60HZ 3.0A max. output +25 6A +12 3A. The only limiting factor is that the plug/connector should fit the jack of the TV unit.
Having said that, then most electronics store would have a generic replacement. You can even look for replacement from computer stores. Over the counter sale would not need a PayPal account, and cash sale would of course not require a credit card. It would be to your advantage to bring along the original/defective with you to compare/as per sample.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It seem to be the #1 common problem with the Protron TV.
It maybe cheaper to find someone to fix the power supply, but if you get it from LCDPAYLESS, make sure it has some type of warranty on it. I hate to see anyone pay $130 and it only last a couple of months.
I have a 32'' Sova LCD tv with the same problem. The problem maybe your power supply. In my case, it was the power supply (no.# YHi 090-02180-13) it had no voltage out put, no blue light and no working fan. Remove the power supply and take it to your local repair center and check it for voltage out put. I found it difficult to locate the same power supply after the decision not to repair mine. There is an alternative I found on ebay, it doesn't look the same, but all the spec checks out. I had this power supply for two days and my tv work great so far so good.
If I understand your description correctly, you have two TVs that use the same model adapter, and both adapters have failed. In that case, I would suspect a weak design, or you may have put them in some place where they were overheated or zapped by power line surges. If it appears to be a design problem, you may want to consider using a substitute.
The adapter should have the output voltage and current marked on it, for example, 12VDC 2300mA would be a 12 Volt, 2.3 Amp output. The polarity is usually marked with a diagram showing whether the center in or hole in the plug is positive or negative.
You can use an adapter with the same voltage and plug style (including polarity) and the same or greater current output. If you find one with the right voltage and current, but the wrong plug, you may be able to change the plug. Just be absolutely certain you have the wires going to the correct terminals; reversing the polarity could damage or destroy your TV. Do a proper solder job on it; simply stripping the wires and twisting them on will not be reliable.
Sources for adapters include www.jameco.com and www.mouser.com.