Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

46PP9302/17f convergence problem maybe....

I have a Philips rear projection HDtv. Yesterday on one side of the tv the Convergence is distorted but in the center and the right side it is fine. Recently I cleaned the so-called fake mirror and the lenses. Also cleaning the inside of the screen. I would say about a week later this incident happens and now HD looks like an off 3D. Watching the inauguration was a bit challenging due to this is the largest tv in the house. I would love to post a picture of what it looks like. I know its the tv due to the testing of my DVD and and the rest of the inputs. I tried adjusting the focus and the clarity and surprisingly the focus has been off for quite some time. It looks better but still have convergence issues which I believe. Please help to keep my wife from making the next shopping experience horrible for me...lol

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

You need the STK392-120 convergence amps replaced along with possibly a couple of 6.8 ohm resistors.As a technician this job can range anywhere between $185.00-$250.00.If you can solder the dificulty level will require some electronics experience.Good luck!!

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Philips 60inch widescreen rear Projection the picture color is blue and red how can i fix it


Tv problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignment,have colors shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 12, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Red Projection Is distorted


Convergence is dead.U know how to solders?Must replaced 2 convergence,and some or all it resistors.Tries websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Mar 05, 2010 | Philips 60PP9202 60" Rear Projection...

2 Answers

My screen image is concave, like a funhouse mirror. The image is distorted at the top and bottom of the screen. Any suggestions?


it is called pincushion circuit. either the diode went bad, the capacitors, or just maybe a simple solderond the bad connections.

Nov 17, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Zenith R50V26 50" projection tv with a convergence problem can we fix this ourselves?


Yes - you can do it yourseld. There are two common problems with Projection TV sets. Problem #1) Convergence Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pngSOLUTION http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 13, 2009 | Philips 51PW9363 51" Rear Projection...

1 Answer

PHILIPS 60PW936317 - COLORS GOT DISTORTED AS I WAS WATCHING TV


Your convergence chips and convergence resistors are going bad. When they fail the screen colors will look distorted/3d looking.  Another symptom is one or more colors can't be converged using the convergence menu. You can purchase the parts over the internet. Just make sure you get Sanyo brand convergence chips and the correct flame proof resistors. You can also check the site www.TvRepairKits.com. They are working on a complete kit for this model.

Nov 12, 2008 | Philips 60PP9202 60" Rear Projection...

1 Answer

Philips 46-inch Rear Projection with bowed image?? slight distortion



You have a convergence problem. Here are some of the most common symptoms. 

Screen looks 3D
One or more colors can't be adjusted when when using the convergence menu. 
Screen is bowed in but stationary.

Solution: 
You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kit for your exact model. The kit inlcludes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. Everything you need to fix it yourself. Its an easy fix. 

Jul 02, 2008 | Philips 46PP9302 46" Rear Projection...

1 Answer

Problem with convergence


bad convergence ic's
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 03, 2008 | Philips Magnavox 9P6034C 60" Rear...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...