Question about SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Changing Time Zone on Wind & Weather Atomic Clock

I received a wind & weather atomic clock a 3 or 4 years ago. I know it is not the product listed here, but i was hoping for any help.

I am trying to set up the time on it, and it is set for Pacific Time Zone (we live in central). how do i change the time zone?

the only buttons on the front are +,-,mode,channel, and alarm. The only info i can find on the back is an FCC ID - Q9PPCR325W. any help would be appreciated!

Posted by on

  • Randy Reynard Mar 08, 2009

    Can't change the time zone (or get it set to DST) on the "Wind and Weather Atomic Clock.  Just 4 buttons on the front +, -, Mode etc...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 7 Answers

1. Press MODE to select the time with the day of week
display mode.
2. Select the time zone by pressing and holding the “ + ”
button for 3 seconds.
3. Keep holding until the desired time zone (Pacifi c,
Mountain, Central, or Eastern) is selected on the
display map

Posted on Mar 08, 2009

  • beecaudle Jan 15, 2011

    I just tried using these suggested instructions and it worked to some degree. The only puzzling thing that I found is that I am in "Eastern" time zone, and if I set it to that zone on the display map, it bumps up the time by two hours. However, when I set it to the "Mountain" time zone it sets the time to my actual time zone. Interesting. Oh well....hope this helps.... two years later :)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OUTSIDE TEMP SENDING UNIT GOT WET AND WILL NOT CONNECT TO CLOCK. HOW CAN I FIX OR HOW CAN I REPLACE?


[PDF]WS-8117 ATOMIC CLOCK WITH OUTDOOR WIRELESS ...

https://www.lacrossetechnology.com/products/.../misc/8117-manual.pdf
NOTE: Do not set the clock until the outdoor temperature is displayed. .... The unit will still try and receive the signal every day despite it being manually set. ..... sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes ... Beforesending the atomic clock in for repairs, contact La Crosse Technology.

La Crosse Technology Top Solutions

https://www.lacrossetechnology.com/support/top_solutions.php
A: Complete a restart for display with the temperature/humidity sensor: ... to rest for 15 minutes can result in failure to connect with the outdoor sensor or missing ... Products set outside of these time zones will not search for a WWVB signal as it is ... locate the Clock or Weather Display near an outside wall and point the unit in ...

Common issues weather stations: Click Here

www.weather-station-products.co.uk/faqs/common-issues-weather-stations
Under £30 £30-£75 £75-£125 From £125 Birdhouses/Feeders Outdoor Clocks ... I'mnot getting any outdoor readings from my outdoor sensor, what do I do? This willcure 90% of all sensor connection problems, important you must ... is the airtemperature, to get this reading you need to place the unit away from direct sun.

Replacement Temperature Sensor ' AcuRite

www.acurite.com > All products

Dec 16, 2015 | Audio Players & Recorders

1 Answer

How do I change from military to 12 hour format on the time display of the Sharp Atomic Weather Station SPC1003


Resetting: 1. Remove batteries from both the outdoor transmitter and the Temperature station. 2. Wait at least 30 seconds and then repeat the procedures specified in Setting up (above). Note: Always wait at least 30 seconds after removing the batteries before reinserting, otherwise start up and transmission problems may occur. Also, remember when insertting, that both units have to reset and to always reinsert the batteries to the transmitter first

Instructions
    • 1 Insert the batteries into the clock and verify that the clock's display is functioning.
    • 2 Set the correct time-zone and Daylight Saving Time (DST) switches. The switches are on the back of the clock. Select EST if you are in Eastern Standard Time, CST if you are in Central Standard Time, MST if you are in Mountain Standard Time, or PST if you are in Pacific Standard Time. The DST selector should be set to "off" or "on" depending on the laws of your state.
    • 3 Wait 15 minutes. The clock should synchronize automatically.
    • 4 Set the clock manually using the buttons on the back panel if the clock does not catch the radio signal within the first 15 minutes. Push the correct button to advance the month/day/year on the calendar; use the MODE button to set the hour and minute.
    • 5 The clock should adjust itself within 48 hours to match the atomic signal. Verify that the clock is receiving the signal by checking the front display. You should see the image of a tower with circular lines at its top.


Read more : http://www.ehow.com/how_5698886_set-sharp-atomic-wall-clock.html

May 08, 2015 | Audio Players & Recorders

1 Answer

I lost the instructions for the talking Reizen atomic clock and both of them are now an hour off. How do I reset the time?


You need to change the 'Zone' settings on both; the signal from Boulder, CO can't tell where you are, you have to make the correction locally and then they will track the signal accurately as long as they can receive it.

Nov 27, 2011 | Reizen Atomic Talking Clock

1 Answer

Manual for SkyScan atomic clock -model 86742 I need to know how to change the clock to eastern time.


Hello

The SkyScan ATOMIC Clock

With the Skyscan Atomic Clock, you have the most accurate timepiece within the continent. It can receive the time signal transmitted by the National Institute of Standards and Technology (NIST), which is regulated by 3 atomic clocks and deviates less than 1 second within 3,000 years. The NIST broadcasts the time signal (WWVB, 60kHz) continuously from Fort Collins, Colorado. This signal can be received anywhere in the continental USA that long wave (AM) radio reception is possible with a portable radio. It is expected that the signal can cover a distance of over 2,000 miles from the transmitter. Therefore, your clock will receive the signal within the broadcast range anywhere an AM signal can be received; generally the signal cannot be picked up in massive metal and concrete structures unless near a window. In addition, some environmental effects (see next page) may affect the transmitting distance.

Nov 08, 2011 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

My oregon scientific indoor outdoor weather station with atomic clock just stopped picking up the outdoor readings, it won't switch to that channel any longer. tried removing and reinstalling the battery,...


I had the same problem, Since the outside temp wouldn't read, I figured it was the outside unit batteries. Went through half a dozen AAA batteries and wouldn't read. It was the indoor unit. Had the same bats I installed 3 years ago. DUH! Replaced the AAA, and all was well. When the inside batteries die out, it has just enough juice to read indoor temp, but not enought to sense exterior signal.

Oct 20, 2010 | Oregon Scientific Wireless IndoorOutdoor...

2 Answers

RCA atomic clock radio didn't reset to DST


Perhaps you've already tried this but on my atomic clock I have to select the DST option and make sure you're in the correct time zone.

Mar 09, 2009 | RCA RP5430 Clock Radio

1 Answer

Changing the time


you can go to http://www2.oregonscientific.com/assets/manuals2/bar338pa.pdf to see or print the user's manual.

If you don't want to get the manual, here's what you do to fix it. . . . .
*note: you need to do this anytime you change the batteries.

1) open the battery cover
2) on the left side you'll see 3 little buttons labeled a)zone, b)C/F c)reset
3) push the reset
4)push the zone button until your time zone is highlighted on the front display
5) look at the front display & if you see a blinking "radio signal" icon at upper left of time numerals
don't do anything else. The time, date, etc. will automatically synchronize your clock with the US Atomic Clock. This could take up to 10 minutes. As long as the "radio signal" icon is blinking, it's working on it. When the icon doesnt' blink, it's set. Cool, huh?
6) if the area you live in can't receive the signal from the Atomic Clock, instead of a blinking "radio signal", you'll see just a bare antennae. Since you probably set your clock manually, that's what it shows now before you do anything.
7) after you push reset & set the time zone do NOT touch any other buttons to set anything!!! (I know it's difficult to leave things alone, but just sit on your hands). Pushing the "clock" button or the up & down arrows will stop the radio signal & change to manual functions. Look at the signal icon mentioned in 5) and 6) above. If you only have the bare antennae icon. . . . . go ahead & set the time/date yourself. You have no signal.

Enjoy your clock!
debkresh

Jan 25, 2009 | Oregon Scientific FM Weather Projection...

2 Answers

Savings time


This is more of a Clarification than a solution.
I've determined that the SS-5000 is not recognizing the changes to DST that happened in 2007.

From 1986 to 2006 this was the first Sunday in April to the last Sunday in October, but starting in 2007, it is observed from the second Sunday in March to the first Sunday in November, adding about a month to daylight saving time.

So in March the clock is still trying to keep the "earler" time and in November it's trying to keep the 'later' time.

I'm contacting HomeMedics Support to see if there's a resolution.

Mar 17, 2008 | Homedics Sound Spa Premier SS-5000 Clock...

Not finding what you are looking for?
SkyScan 86742 Digital Atomic Wall Clock Logo

1,436 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...