Question about Printronix T4M Printer

1 Answer

Error on printronix t4m

Some times i get the error on the printer

font download, and it does not print anything

when i print tags
with crystal report
on the printer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Re load the flash

Posted on Aug 28, 2009

5 Suggested Answers

SOURCE: Printing Speed

what interface are you using? sounds like windows is sending the data to the printer as graphics which is much more intence then EPL hence the delay between each label.

Posted on Nov 21, 2007

  • 38 Answers

SOURCE: "Shuttle jam" see manual problem on Printronix line matrix P 500E printer

Verify that there is nothing clamped between the platen and the shuttle.

Last time I had this fault, it turned out to be a broken wire in the harness that connects the CMX board to the shuttle module.

Other possibilities include a failed shuttle or CMX board.

Steve W
LazerTek LLC

Posted on Jul 17, 2008

SOURCE: Epson LX-300+II not printing in draft 10 cpi using visual studio .net

use courier font. it works just as draft font. no problem in VB-6 i hope it will also work with .Net as well.
tell if dont work.
asad khan
justasad@hotmail.com

Posted on Nov 07, 2008

c_robertson
  • 123 Answers

SOURCE: prints photos with yellow horizontal stripes.Hv downloaded HP printing diagnostic utility and no errors were reported. If just using scanner to copy photos, prints fine but copying photos in library p

go into the printer and do a test print. start>printer & faxes>right click on the printer in question>properties>printer preference button> test print ... try the printer's own test print. This is usually caused by a poor print head, low ink, poor cartridge or the need for calibration. Look in the maintenance tab in the printer properties for head cleaner, jet cleaner etc. This also happens with refill ink cartridges.

Posted on Apr 29, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing barcode using font 39


The printer can get out of "phase" and the print will look shaky. These instructions are for the P5000 but the phasing process has not changed.

http://themrpsolution.com/v//vspfiles/Tech%20Tips%20Q&A/Printronix/P5000_phasing.pdf

Jan 14, 2016 | Printronix P7220 Matrix Printer

2 Answers

Can the Printronix P7005 PSA3 print PDF files?


Sounds like your printer may need IPDS, I'll need to see a configuration page from your printer in order to determine whats on it. you can email me it at rcardenas@mrp.to

Apr 09, 2013 | Printronix LineJet® P7005 Printer

1 Answer

We are creating a crystal report using asp.net and the report has to be printed on 132 cloumn dot matrix printer, but its skipping few columns, can someone help me how to print the crystal report to a dos...


Make sure you have the right driver (ie mx80). Only one or two drivers will work well in dos. It may also need a string added to the report to force it to go to the dos printer. Another thing that can affect size is the font size or font size must be placed in the header of the report.

Mar 02, 2011 | OKI MICROLINE® ML390 Matrix Printer

1 Answer

I am trying to print a label on the zebra 105SL but the font and the "text boxes" are printing too large like it is zoomed out - how do I resolve this issue?


I am trying to print a label on the zebra 105SL but the font ...

www.fixya.com/support/t5406223-am_trying_print_label_zebra_105sl
Jul 11, 2010 - I am trying to print a label on the zebra 105SL but the font and the "text boxes" are printing too large like it is zoomed out - how do I resolve this ...

db:: 4.67::Crystal Report Label Won't Send To Zebra k9

www.hivmr.com/db/k99xad9dfspspddfs1scm9fzxxkdz9dj
My routine can print the label to any other laser printer, but the Zebra. ... I am tryingto find a way to print actual time a smartform label gets printed out on a zebra ... In this i want to changeCross Tab expert Row Label Font,Cross Tab expert ..... And labelpaper too. ..... DB:2.73:Zebra 105sl And Crystal Report Label Issues 1d.

db:: 5.16::Help My printer is printing in 3x5 documents and I ...

www.hivmr.com/db/xkzpajp81937ap7zdf87sdmsxmcm179m
DB:4.06:Printing 3x5 Continuous Feed Labels On Hp Officejet 6100 d8 ... Are they toosmall? ... I want to help you but I am not sure I can be of much help until I know what kind ... If the paper size is 3.5x5 but you are trying to print a 3x5 photo (which seems to be ...... I have a label format issue on a Zebra 105SL label printer.

db:: 4.15::Custom label sizes md - Hivmr


Jul 11, 2010 | Office Equipment & Supplies

1 Answer

How to increase the speed of Dot Matrix Printer using CrystalRpts


In the .rpt file select the printer fonts (they will have a printer icon next to them). These will print faster than truetype fonts.

Apr 16, 2010 | OKI MICROLINE® ML390 Matrix Printer

1 Answer

Hello.......Ihave problem abount Printronix P5210


Open the printers window from the control panel and right click on the printer icon and select properties..
ON the properties window , click on advancd tab, select the option as print directly to printer and click on apply and the n click on ok ...
Try to print and see the speed ... .

Dec 11, 2009 | Office Equipment & Supplies

1 Answer

HOW TO PRINT LABELS IN DATAMAX PRODIGY PLUS PRINTER USING VB.NET


Tu necesitas utilizar comandos DPL. Pero si vas a utilizar graficos o windows true type fonts, tu necesitas un cartucho de memoria ram o flash. You need to use DPL commands. But if you use graphics or windows true type fonts, you need a RAM or flash cartridge.

Apr 06, 2009 | Datamax Prodigy Plus Thermal Printer

2 Answers

Barcodes not scanning


Very possible you have a bad printhead. If you have a bad dot in your print area, it can cause barcodes to not scan. Look to see if you have a blank vertical line running down your label.

Dec 31, 2008 | Epson TM T90 Printer

1 Answer

Epson LX-300+II not printing in draft 10 cpi using visual studio .net


use courier font. it works just as draft font. no problem in VB-6 i hope it will also work with .Net as well.
tell if dont work.
asad khan
justasad@hotmail.com

Oct 27, 2008 | Epson LX-300 Matrix Printer

Not finding what you are looking for?
Printronix T4M Printer Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printronix Office Equipment & Supplies Experts

Toby
Toby

Level 1 Expert

34 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Are you a Printronix Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...