Question about Kenmore 44072 Front Load Washer

1 Answer

Washer will not turn on, only beeps.

Hello, We went to start the washer the other day with a full load of clothes and when we pressed the start button or one of the settings like you normally do, all it did was beep. No lights even blinked. We looked in the manual for some kind of solution but with no result. Please help if you can. We checked all the things like the power cord and we turned off the power to it and then back on...only to find the same problem. Thanks in advance. B

Posted by on

  • 1 more comment 
  • PR mad Jun 01, 2008

    No water, only beeping and door locked.

  • georgiamharr Aug 20, 2008

    We I turn the washer on the washer locks the door, but unlocks and starts to buzz.

  • Anonymous Nov 25, 2008

    My washer only beeps and the door does not lock. How do I fix it?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

You might have a door switch problem.or door might not be closing properly.

Posted on Jun 30, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting an error it is as follows: finished, spin, and wash lights blinking plus 3 beeps. What does this mean?


Try restarting it, make sure the load isnt to heavy, if that does not help, call a local repair man.

Nov 06, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

I have a kenmore front load washer model 41744052500 the other day i did a load of wash and when i went to the drain cycle it worked fine but whenit went to spin it went right a couple of times then left...


tub was out of balance remove some of the heavier clothing and re spin! and in the future donlt try to run so much through it that are heavier items when they are wet

Jan 12, 2010 | Kenmore Energy Star 44092 Front Load...

1 Answer

Washer keeps beeping


Hello connie32,

If you haven't tried pull the 120VAC cord to the washer for ten seconds or so and then re-power up this will hard reset the control board. If that doesn't help and you want to continue to troubleshoot I will have you try to get into Service Mode.

Could you confirm if your machine is a FAV6800AW or FAV9800AW. That would help me with further troubleshooting. I'm an FAV6800AW owner.


Aug 09, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Washer won't run , push start button just beeps


in order to determine what is the cause of your problem , please provide the error codes an model number so we can figure out what is wrong with it, has anyone set anything heavy on top of the machine if is a top load machine, first guess if you have power to the machine would be look into the lid swtich an go from there....

May 28, 2009 | Bosch Washing Machines

1 Answer

Just had an Affinity front loading washer delivered today. Did four loads without any issues, clothes are clean and smell great. After the washer was idle for about an hour, it started beeping, and the...


try disconnecting the power for at least 30 seconds which might reset control if this fails call service the control is faulty you have a 1 year full warrenty

Dec 21, 2008 | Frigidaire ATF6000ES Front Load Washer

2 Answers

The wash beeps all the time


To stop the flashing and beeping, the customer may touch the Pause Cancel button. The error code remains stored in the control but once the problem is corrected, it does not effect the operation of the washer. If the failure is something that the customer can correct (such as the water faucets being turned off), the washer will operate normally the next time it is started.

Nov 18, 2008 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Kenmore 44072 Front Load Washer Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2696 Answers

fordexpert

Level 3 Expert

5677 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...