Question about Computers & Internet

2 Answers

I just flashed my Bios Gigabyte GA-965P-DS3 from F12 to F13. Now my CPU fan is at full speed. It's loud and driving me nuts. I've looked all through the bios to see if I can slow it down. Also, went on line. Can you assist me with fixing this problem? Thanks GA-965P-DS3

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I take it this is a custom built system?

I have read up a bit on this specific mainboard and it seems that the speed of the fan is not controlled via BIOS but rather by some of the software that comes with the mainboard. Even knowing that the software that comes with it is not very highly recommended. this program seems to be your best bet in adjusting your speeds http://www.almico.com/speedfan.php it's called Speedfan. Give it a shot and if you need further assistance just let me know.

Posted on Jan 20, 2009

  • Frank James Jan 21, 2009

    I agree with that.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

It's actually good that your cpu fan is runing at it's full speed. Usually only the manufacturer issues firmwares. Lookforward Gigabyte for the update. thanx

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there any upgrade for my Bios? Bios type: Award


Why don't you look at the support section of the Gigabyte website? That is where you will need to go to download it anyway.

Sep 16, 2013 | Computers & Internet

Tip

CPU Fan Speed high


What Could be happening inside when you hear the cpu fan running at a high speed always ?

Ever thought about it ? Ok let me give you a clue on this. To understand this issue you need to understand how the hardware works on various situations.


Check the Heat settings in bios and look for the variance.

Bios can instruct a CPU fan to run faster only when there are critical lssues of heating.

The CPU starts running on a realtime 16bit more known as SMM mode.

This is a feature which is inbuilt to support the continuous performance of the Processor even while temperature level rises.

The instruction is moved through the Bios, and can be a bios related issue.

Worst case, Flash the Bios once for all and the issue will be solved.

If its a very old system flashing the bios could be also a problem, still you can seek the help of a Hardware Engineer to get this accomplished.



on Feb 13, 2010 | Computers & Internet

1 Answer

I have a Dell T3400 deskto pc running win xp. When


Check your BIOS settings to see if "smart fan" settings are enabled or disabled.

If they are disabled, your fan will run at max speed all the time.

Once enabled, the fan should only speed up as your cpu heats up, and then turn itself down once a lower temperature is reached.



Aug 04, 2010 | Dell Precision T3400 PC Desktop

1 Answer

Computer does not see all ram. I have 2 of the same 512mb ram sticks it only sees one 512. If I only put in on at a time each one works but not both together. It does not show up in post or windows xp sp2...


u do need to remember that when you use 2 ram "sticks": 1. they CANNOT BE putted in slots directly next to each other. leave slot between them free. 2.they need to be exact same frequency and type [ddr1 or 2 or 3] and they both must have or not error connection on as if bios program upgrade utility is damaged do not try to upgrade bios as u may damage your motherboard beafore u try with 1gb stick refer to otherboard manual for ddr type and momory frequency

Dec 06, 2009 | Computers & Internet

1 Answer

Can you mix 1gb and 2gb dimms in the same machine (for a total of 6gb)? I added two 2gb 1066 DDR2 dimms (''OCZ'') to a PC that already had two 1066 DDR2 1gb dimms (''Kingston''). I moved the 1gb dimms to...


Your MB is AM3 with 128MB DDR3-1333 built-in, four 1.8 Volt DDR2-1200+ depending on cpu. Have you enabled cpu 64 bit extensions? Tried slowing down your memory bus?
My ASUS use dual channel for dual core cpu. I have 2 yellow and 2 black dimm sockets. Both dimms in yellow is single channel, one in yellow and one in black is dual channel. Might try 2,1,2,1 rather than 2,2,1,1 order. If only your 2 1GB dimms are seen then why do you get 4 GB from 1GB+1GB? Sounds like sockets 1,2 are giving you 4GB and 3,4 don't work? Are the 1GB+1GB in 3,4 visible if the dimms in 1,2 are removed? Per Gigabyte page your AMD Phenom II 920 is AM2+ : "Note: Due to AMD AM2+ CPU limitation, memory module DDR2 1066 or above speed is only supported by 1 dimm per channel." Per AMD (which does not show your cpu, AM3 cpu fit AM3 or AM2+ socket and support ddr2 and ddr3, AM2+ cpu only work in AM2+ socket and support ddr2 only.

Oct 16, 2009 | Computers & Internet

1 Answer

No video on new Gigabyte GA-MA770-DS3 motherboard


There are a couple things that you need to look at. The first is your power supply. I've had computers seeming to run fine with no video. Turned out to be bad power supplies.
Does your video card require a power connection? Many high-end video cards need an external power connection. If the card has a power connection, use it.
Have you gone in and checked the cmos settings? What does it say (if anything) for the default video?
Now remove all connections to drives (hard drive and CD and try for video. Try it.
Next, if possible, swap out memory.
After you've tried everything (including maybe burning incense), time to try a new motherboard.

May 27, 2009 | Gigabyte Computers & Internet

1 Answer

Motherboard will not start


It seems like there could be a short in the system. Check to make sure that the board is tight in the case, and that no foreign objects are causing the motherboard to short. If there is no obvious problem and the motherboard is new, I would return it as a defect.

May 12, 2009 | Gigabyte Computers & Internet

1 Answer

Emachine t5230 cpu fan too fast


Hi orinzelenak,

This may seem like to simple, but try checking to see if the technician plugged the fan power supply into the correct pin for it. It sounds like the fan is plugged into a external plug directly from the power supply and not into the board, which would control the fan speed for you. Give a look, and maybe it's just that simple.

Good Luck

Mark

Jan 04, 2009 | E-Machines T2682 (000002965) PC Desktop

1 Answer

I have an amd 6000 3.1 gig cpu being cooled by zalman cnps9500a led cooler on a gigabyte ga-m61pme-s2 motherboard and the cpu keeps on overheating when i play something as simple as world of warcraft,...


Try reapplying the thermal paste. Make sure it is a thin layer evenly spread across CPU. Also make sure you have good airflow through your case. And check your BIOS to make sure your fan will spin up faster to regulate temperature.

Nov 25, 2008 | AMD Computers & Internet

4 Answers

New Computer


Hi im David,

1. To start to buying a computer, you need a Standard ATX case, they sell only ATX cases so you can choose one at the shop that suits you. Then you might want to get a power supply because the pne that comes with the case will not supply enought power. You would want at least 550W. I recomment the Coolermaster 660W.

2. You will then need to think what Brand CPU your going to use. These days AMD is not making the best CPU's So i recommend Intel. Based on what you want to do and what the shop has, i would get the Dual Core E7200 (2.53 GHz 3MB Cache) or the E8400 (3.0GHz 6MB Cache). There is no point for buying a Quad core as it is expensive and not many games can use the full extent of the CPU.

3. Once chosen teh brand on the CPU you have to buy a Motherboard that supports the CPU, they only sell One type of Intel CPU and that the LGA 775 so any Intel Motherboard will work with your CPU. I would get Gigabyte GA-EP43-DS3 at $125. Dont bother buying anything higher than $155 unless you got the money and really need it. I psersonally use GA-EP43-DS3 because it has all the features i need like Dual Graphics (not SLI), 3 firewire connections, 12 USB ports, 7.1 Surround Sound, 6 SATA Ports and 4 ram slots.

4. Once gotten your motehrboard you will need RAM. They sell Kingstom and Corsair DDR2 Ram at speed of 800MHz. Corsair is a much better brand but you wont notice much difference between the two of them. 2GB is more than enought if your going to run XP but you will need 4GB for Vista. get 4X1GB and you will get faster speeds than 2X2GB.

5. Getting a Hard Drive. Depending what you are going to store on your Hard drive, you can get different sizes. The bigger the size the cheaper it is per gigabyte. I would get a 500GB. Western Digital and Samsung is quieter than Segate but isnt as fast in speed but you wont notice the difference. Make sure you get 3.5" or if u want you can get a 2.5" but it wont fit anywhere in your case so you will have to rest it soemwhere. It still can be plugged it to your motherboard. I use a 2.5: with my Desktop PC because it reduces noise.

6. Getting an optical Drive. Make sure you get a DVD Burner, they are only $40. YOu may consider getting a Blu-Ray Drive so you can watch Blu-ray movies on your cmputer or use your Computer as a Blu-ray player and plug it in your LCD TV. Blu ray will cost $175 for LG or $215 for Pioneer. Pioneer is better.

7. Next you will need a PCI-Express graphics card. For your games the minimum i would buy would be Gigabyte Nvidia 8400GS. I recommend Gigabyte Nvidia 9600GT 512MB.

8. You may want to buy a monitor, you can choose since its just a monitor.


You can choose any preheripals such as mouse and keuboard. Wireless mouse is recommend but theres no point for wireless keyboard unless you plan to sit a few meters away from the computer.

Once bought you can get the shop to buid it for you or you can buid it yourself.
When building yourself, make sure you wear a Electrostatic Discharge Wrist band to prevent damage. Or simply touch the metal of the case to get rid of the static. Do not touch any electrical compunet pins such as CPU pins and CPU socket Pins.

Once made you will need to install an operating system. You can buy one or Download a pirated version.

Oct 10, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98694 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...