Question about Panasonic Viera TH-42PX80U Plasma TV

1 Answer

TV / monitor power on and them turn off and the red light flash

I turn on my tv, and after some minutes the tv turn off and the red light in the tv start to put on and off continuosly.

Posted by on

  • 2 more comments 
  • mrichter001 Jan 29, 2009

    I am having the same problem. The light flashes nine times. What is the fault?

  • tynitty Feb 12, 2009

    I have the same problem. My blink code is 6

  • blanen Feb 15, 2009

    I just purchase a Panasonic plasma TH-42PX80U and it keep automatically shutting off. Then I get 8 blinking red lights.



  • louhuni May 04, 2009

    My tv flashs 10 red lights then goes off for a few seconds then flashes 10 times again can you help me out please.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 151 Answers

Hello, count the time it flashes this is the a trouble shooting code. it will tell you what part or panel you need to repair, the system is in safety mode this happens when theres a detected circut problem
your tv needs service.

let me how many times does it blink between every five secounds
i will tell you what the fualt is..

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't turn. on red standby light changes to on but then goes right back red


TV won't turn on - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - I have the Samsung FP-T5084 50" Plasma tv. I went to turn it on the other day, and it wouldn't turn on. No clicking. No red power indicator light. Nothing. Samsung TV LN52A650A1FXZA won't turn on, keeps clicking
Jun 11, 2015
Samsung TV won't turn on
Jun 11, 2015
Samsung LCD TV LN32A330 power won't turn on
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
More results from www.cnet.com

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html
If you unplug for a minute and hit the power button it sound like it is coming on then it shuts off and the red power light flashes slowly. The TV is a Panisonic 1080i HDTV, about 6-7 years old. ... I have an old type sony tv with the big back and the red power light keeps flashing and ...

How do you fix a television that won't turn on? - Ask.com

www.ask.com > Technology > Television & Video

Jan 03, 2016 | Flat Panel Televisions

1 Answer

My TV randomly switches itself off and the red light flashes continously and i have to pull out the plug. its getting more frequent


Samsung TV Keeps Shutting Down - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - When I turn the TV on for the first time each day it shuts itself off within 30 seconds. ... green light flashing red light is [standby term] green light is [lamp]flashing. samsung plasma 850 picks up other remote signals?
Jun 12, 2015
Samsung LED UN55B7100 turns off on its own.
Jun 11, 2015
Volume goes automatically to 0 on my Samsung LCD TV
Jun 10, 2015
Why TV turns off by itself?
Jul 12, 2012
More results from www.cnet.com

Easy fix for new Samsung TV switching on and off power ...

? 4:41
https://www.youtube.com/watch?v=H0cG3lzjuw8
Sep 15, 2012 - Uploaded by alwaysafix
My tv turns on and off by itself the minute I plug in the cable. .... Samsung E6030 led tv hv blinkin red light ...

Dec 25, 2015 | Flat Panel Televisions

2 Answers

Tv turned off by itself, red light came on. when i turned it back on if had a flashing green light the turned solid green, there was sound but no picture, it turned off again within 2 minutes of turning it...


Tv probally needed a new tv projection lamp.This tv has not been change it projection lamp like 1 1/2 or 2 years already?Tv been on and used it like 4 or 5 hours everyday?Yes,than the tv flashing or solid on green LED light is on have a word "LAMP" written on it tv bazel frame?Yes,tv 100% require a new tv projection lamp replacement.

Aug 31, 2011 | Mitsubishi WD-73737 73 in. HD-Ready TV

1 Answer

TV just turned off while watching. standby light flickering red 7


Ur power board have dead capacitors.U Know how to solders?Take the tv aparts,check these capacitors in the power board for dead capcitors like puff up or burst open.Replaced these capacitors to get power back.Or buy and replaced the whole reburbish power board at Shopjimmy.com,Ebay.com.








Jan 21, 2010 | Flat Panel Televisions

1 Answer

Sony Bravia kdl-46S3000 flashing red lights


Sounds Lamp is weak in this TV.
Please replace lamp and procedure is written in TV user manual.

Mar 14, 2009 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

1 Answer

TV not coming on...


Try first leaving the TV power cord unplugged for some times, let say one hour or so.

Also ensure that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem on dvd with no receiver box connected.

If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic chargesaccumulating on capacitors, or because of a wrong voltage read by themain chip on your monitor controller board. this started the protectioncircuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , startingthe flashing light.


If you are in situation one, then theTV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing statebecause of the video cable.

Try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

Mar 09, 2009 | Flat Panel Televisions

1 Answer

Red Light Flashing 6 times


When the lamp fails in this unit, often the thermal fuse opens. The error code is 6 blinks. To replace this part requires a great deal of deal of disassembly.

Mar 29, 2008 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

Lamp problem or else?


You need to get the ballast repair kit #LSUC0002 and replace the parts to your ballast.

I have the exact same TV, did the above this past weekend, and the TV works like new.

You need to know how to solder though. It's not that hard.

Mar 14, 2008 | Panasonic PT-60LC13 Television

Not finding what you are looking for?
Panasonic Viera TH-42PX80U Plasma TV Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

charlie rodriguez
charlie rodriguez

Level 2 Expert

151 Answers

Are you a Panasonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...