An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has written 50 answers of more than 400 characters.
Re: machine shows a service code of sc 928
The SC - 928 is a Memory error problem. The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode). To try to reset this code -- Turn the MAIN power switch off, wait about 30 secs. then turn switch back On.
Possible causes: • Memory defective • BICU defective • Poor connection between BICU and memory The cheapest repair would be to replace the memory. It is rare the the connections came apart unless some one was in the back of the machine for some reason.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Memory error 928. The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode). • Memory defective • BICU defective • Poor connection between BICU and memory
Fusing thermistor deformed or out of position ? Fusing lamp harness loose, broken, defective ? Fusing unit defective ? After servicing the machine to solve the problem, the service technician must execute a "Fuser SC Reset". Otherwise, the machine will continue to issue this SC code and cannot be operated.- Carl
Hello sir; Your machine need to reset, the procedure as follow;
1, press "clear mode", "107", then hold down "clear/stop" key, until screen change message to sp mode.
2, turn power off and back on ,machine will in working condition.
SC 541 indicates a problem with the heating unit thermistor in the machine.
This type of inquiry requires service support from your local authorized dealer or original point of purchase. This type of service code can not be reset by the user for safety reasons.
The error is about the fusing unit for to reset the code you must enter into the service menu and reset the SC code 517 For to enter the service menu you should do the follow steps : 1.Enter the service menu by pressing the follow keys in order: yellow key[clear modes] then press "107" number one after other and then press and hold the red key [clear/stop] 2.Hold it down until service mode do not appear if not appear after 10 seconds try again. After you will be in service mode press the follow numbers :5810 and then will apear on the screen "SC reset" set the value from "0" to "1". Then turn off and after 5 seconds turn it on the machine. Please replay if this do not help and write the SC code good because i cannot find the code SC517