Question about Epson TM-T88IV Printer
I need to print Thai in Epson TMT88iv. It is combining the characters in the wrong way, how do i get this to work? please help.
SOURCE: EPSON TM T88IV
The TM-T88IV printer is a thermal printer and does not have ink or a ribbon.
If the printer is not printing you may have the wrong type of paper in the printer. You must have thermal paper in order for the printer to work. Paper for a dot matrix printer will not work in this printer.
The printer has a self-test that you can perform by turning the printer off, holding down the Feed button and turning the printer on. A test strip will print. Press the Feed button again to print a longer test strip.
Posted on May 16, 2008
go to this site to get detailed information:
wrote a tip http://www.fixya.com/support/r672100-epson_impact_printers_mac (mac's are unix)
Posted on Oct 10, 2008
Epson POS driver will not install on a Win2K3 machine due to the InstallShield Wizard w/c checks if your running XP/2K or not.
Download the driver from EPSON POS site & extract the contents first on an XP machine.(Installing the driver will create a C:\Epson folder where ACTUAL driver is extracted).
Posted on Mar 06, 2009
The following is from the Epson Users Manual:
No lights on the control panel
Check the power supply cable connections and the power outlet.
ERROR LED on (not flashing) with no printing
If PAPER OUT is on, the roll paper is not installed or is near the end.
If PAPER OUT is off, the printer cover is not closed properly.
ERROR LED flashing with no printing (and no paper jam)
Printing stops if the head overheats and resumes automatically when it cools.
If overheating is not the cause, turn the printer off, and after 10 seconds, back on.
Removing Jammed Paper
Do not touch the thermal head because it can be very hot after printing.
1. Turn the printer off and press the cover open button.
2. Remove jammed paper, reinstall the roll, and close the cover.
3. If paper is caught in the cutter and you cannot open the printer cover, open
the cutter cover as shown in illustration J.
4. Turn the knob until you see a triangle in the opening. This returns the cutter
blade to the normal position. There is a label near the cutter to assist you. See
5. Close the cutter cover.
6. Open the printer cover and remove the jammed paper.
Cleaning the Thermal Head
After printing, the thermal head can be very hot. Be careful not to touch it and
to let it cool before you clean it. Do not damage the thermal head by touching
it with your fingers or any hard object.
Turn off the printer, open the printer cover, and clean the thermal elements of the
thermal head with a cotton swab moistened with an alcohol solvent (ethanol, or
Epson recommends cleaning the thermal head periodically (generally every
3 months) to maintain receipt print quality.
It sounds like your print head is overheating. Clean as instructed above.
Posted on Oct 23, 2009
Tips for a great answer:
Jul 12, 2015 | Epson POS TMT88IV Thermal Receipt Printer
Jun 30, 2014 | Epson TM-T88IV Thermal Printer -...
Feb 01, 2011 | Epson POS TMT88IV Thermal Receipt Printer
May 14, 2010 | Epson POS TMT88IV Thermal Receipt Printer
Dec 24, 2009 | Epson TM-T88IV Thermal Printer -...
Nov 10, 2009 | Epson TM-T88IV Printer
Aug 28, 2009 | Epson POS TMT88IV Thermal Receipt Printer
May 14, 2008 | Epson Stylus C66 Photo InkJet Printer
Aug 03, 2007 | Epson TM-T88IV Label Printer
Feb 06, 2014 | Epson TM-T88IV Printer
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: