Question about Tally T2250 Matrix Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hardware alarm
One likely cause is a blocked optical sensor . Try these three things, in order, and check the printer after each:
- Pick up the printer, turn it upside down, and shake it. If 40 pounds is too much for you to lift, get a friend to help. Or, better yet, get a friend to do it without your help.
- Using an air compressor with a blow gun attachment, direct air to the paper path entry and exit, and to the sides of the platen. Then look for torn-off tractor feed bits of paper in the crevices. You may need tweezers or needle-nose pliers.
- Take the cover off and repeat the previous step with the air compressor. This is tricky. Use this as a last resort, as the printer may not be usable after a troublesome disassembly. Do this only if you're going to have to replace it otherwise.
Posted on Nov 16, 2009
Tips for a great answer:
Jun 30, 2014 | Tally T2250 Matrix Printer
Jan 15, 2011 | Tally T2250 Matrix Printer
Nov 01, 2010 | Tally T2250 Matrix Printer
Oct 08, 2010 | Tally T2250 Matrix Printer
Sep 04, 2010 | Tally T2250 Matrix Printer
13 people viewed this question
Usually answered in minutes!