Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unfortunately, the Russian software does not work on a Mac, and it crashes at launch when installed in WZ98 under Virtual PC. However, I found this on another site, and it worked immediately:
The sequence to reset the waste ink counter is as follows:
WASTE INK ROM RESET ONLY 870, 1270
1. Turn the printer off using the power button on the panel of the printer.
2. Disconnect the interface cable at the back of the printer.
3. Hold down the "LOAD/EJECT" and "CLEANING" buttons simultaneously.
4. Turn the printer on. Release all buttons as soon as paper out light flashes.
5. Quickly press (within 3 seconds while PAPER OUT light is flashing) the "CLEANING" button for 10 seconds.
6. Release the button and the printer will initialize.
7. Once initialization is complete, turn the printer off.
8. Reconnect the interface cable.
9. Turn the printer on
Works great, no muss...no fuss!
Posted on Apr 29, 2009
SOURCE: epson stylus photo r300 general
Hi--I had a BIG problem, day after day, fiddling with my Epson Stylus printer. The "General Error" kept repeating, and the two red buttons flashing each time I turned the printer off and on. There was nothing jammed at all. So, as a last resort I took a paper towel and ran it along the bottom of the inside of the printer (yeah--all technical jargon, I know--not a computer person here :-) and a bunch of black ucky stuff came up. MY PRINTER WORKS NOW! Hope this helps someone else. I saw a lot of posts where people said to throw out the printer and start fresh when my problem happened, but what an easy fix. GOOD LUCK!
Posted on Dec 23, 2008
SOURCE: Epson Stylus Photo R320
Turn off the power and look inside the machine to the right hand side. Just in front to f the print head you will see a white plastic dowel (see photo). Use something technical - like a finger, pen or screwdriver - to push this dowel in. You can then move the print head by hand to the middle of the carriage.
Once moved, turn the printer on and watch it travel back to the home position. If after returning home the dowel pops back out and does not retract itself, you will need to strip the machine out and rebuild the ASF section. Sounds hard but its just a few plastic parts to take apart and reassemble whilst looking to see if anything is broken.
Get a service manual; for the machine HERE if you need to strip it out.
Posted on Sep 19, 2008
The simplest way to do this is to grab a copy of the A10_IPR utility that Epson distribute to their customers...
The utility is available to North American customers if you register no this site page http://www.epson.com/ipr/
The utility is also know to be available in the wild if you search for "waste ink ipr".
Just remember to scan any download using a virus and malware scanner before you attempt to use it as some utilities contain trojans or similar nasties.
Hope that helps.
Posted on May 12, 2009
Tips for a great answer:
Feb 10, 2015 | Epson L800 - printer - color - ink-jet
May 10, 2013 | Office Equipment & Supplies
Mar 30, 2013 | Epson STYLUS PHOTO T60 INKJET PRINTER
Jan 13, 2013 | Epson Stylus 1400 InkJet Photo Printer
May 18, 2017 | Epson Stylus Photo R280 Series
Jul 06, 2010 | Epson Stylus Photo R300 InkJet Printer
Aug 19, 2017 | The Office Equipment & Supplies
1,409 people viewed this question
Usually answered in minutes!