Question about HP OfficeJet 7110 All-In-One Thermal Printer

1 Answer

Cannot figure out where to plug in power cord to hp7110 officejet

We cant figure out where the power cord plugs into the back of the officejet

Posted by on

  • tlars77 Jan 20, 2009

    thanks rajp5983 i cant believe how fast you solved our problem,unbelievable,really. THANK YOU raj

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hi tlats77,
Please click on following link and follow the document. which will help you out to resolve the issue,


http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&product=91472&lc=en&jumpid=reg_R1002_USEN


Regards, 
raj_p5983

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to do a hard reset for HP Officejet 4315v?



  • Perform a partial reset if you are experiencing problems scanning or printing your document. To do this, disconnect the power cord from the wall. Then, hold the "#" and "3" while reconnecting the power cord. Release the buttons once the cord is plugged in. Try to rescan or reprint your document.
  • Perform a semi-full reset if the partial reset did not work. To do this, unplug the power cord. Hold "#" and "6" buttons while plugging the cord back in. Then, release the buttons and try to rescan or reprint your document.
  • Hope this helps
  • Sep 26, 2011 | HP Officejet 4315v All-In-One InkJet...

    1 Answer

    HP 5510v all in one is froze. In the led box it keeps blinking error:oxfoaf8004 Have tried unplugging & plugging several times, popped open cartridge door and had to manually move cartridges,...


    • unplug the power cord from the back of the printer and from the wall outlet
    • hold down the power button for a minute to drain power
    • plug the power cord back in to the wall
    • press # and 3 on the keypad while plugging in the power cord to the back of the printer
    • let go of the keys when the printer starts up

    Jul 29, 2011 | HP Officejet 5610 All-In-One InkJet...

    1 Answer

    Hp officejet 6500 all lights are flashing and mechine says turn off and on . Please can someone Help??


    : Check the power cord

    1.
    Turn on the product.
    2.
    Remove the power cord from the back of the product.
    3.
    Check the power cord for any physical damage. If the power cord is damaged, replace the power cord.

    *
    If these steps resolved the issue , you do not need to continue troubleshooting.
    *
    If the issue persists , continue to the next solution.

    Turn the product off and then on again

    1.
    Press the Power button ( ) to turn the product off.
    2.
    Wait 60 seconds, and then press the Power button ( ) to turn the product back on.
    3.
    If the product does not turn off when the Power button ( ) is pressed, wait three minutes, and then proceed to the next solution.

    Plug the product into a wall outlet
    Follow these steps to make sure the product is plugged in correctly.

    1.
    Unplug the power cord from the back of the product.
    2.
    Unplug the power cord from any surge protectors or power strips.
    3.
    Select a wall outlet to plug the product into. Test the wall outlet by plugging another electric appliance, such as a lamp, into the wall outlet and turning it on. Unplug the test appliance.
    4.
    Plug the power cord into the back of the product.
    5.
    Plug the power cord into the wall outlet.
    6.
    Press the Power button ( ) to turn the product on.

    *
    If these steps resolved the issue , you do not need to continue troubleshooting.
    *
    If the issue persists , continue to the next solution.

    Solution six: Reset the product
    Follow these steps to reset the printer.

    1.
    Unplug the power cord from the back of the product.
    2.
    Unplug the power cord from the wall outlet.
    3.
    Wait 10 seconds, and then plug the power cord back into the wall outlet.
    4.
    Plug the power cord into the back of the product.
    NOTE: Many power cords have an LED light on the power module or on the end of the cord that plugs into the product. Make sure the LED light is lit and steady.
    5.
    Press the Power button ( ) to turn the product on.

    *
    If these steps resolved the issue , you do not need to continue troubleshooting.
    *
    If the issue persists , continue to the next solution.

    6. Perform a partial reset of the product
    1. Disconnect the power cord from the product.
    2. Wait for 20 seconds.
    3. Press and hold # and 3 while reconnecting the power cord.
    4. When the product turns on, release both buttons.
    5. Try printing again.

    IF still won't resolve it by following steps mentioned above then your printer needs replacement. Malfunctioning hardware.

    Mar 28, 2011 | HP Officejet 6500 Wireless All-in-One...

    1 Answer

    The printer screen freezes and i cant do nothing i have disconnected the power sometimes it work but freezes again


    Please follow the below steps.
    STEP 1.
    1. Un plug the power chord from the back of the printer.
    2. Press and hold the power button of the printer.Wait for 30 seconds.
    3. While holding the power button, re-plug the power cable.
    4. Turn on the printer, if it is not on.
    STEP 2.
    1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.

    2. Then, press and hold # and 6 while plugging in the power cord.

    Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.

    May 13, 2010 | HP Officejet Pro L7780 All-In-One InkJet...

    1 Answer

    Front panel not responding


    Please perform the following steps:

    1. Unplug the power cord from the unit.

    2. Press and hold OK and Cancel buttons together while plugging in the power cord back to the unit.
    3. Turn on the unit.

    If the issue persists, please replace the unit. From my experience repairing coast HP OfficeJet 7310xi is almost equal to the coast of a new printer.

    :) Dr Tony

    Apr 19, 2010 | HP OfficeJet 7310 All-In-One InkJet...

    1 Answer

    My hp officejet 7410 all in one display only hp invent and not respond


    Perform a power reset
    1. Press the On button to turn off the HP All-in-One.
    2. Unplug the power cord from the back of the HP All-in-One.
    3. Unplug the power adapter from the wall outlet and wait for 30 seconds.
    4. Plug the power adapter back into the wall outlet.
    5. Plug the power cord to the back of the HP All-in-One.
    6. Press the On button to turn on the HP All-in-One.

    Sep 25, 2009 | HP OfficeJet 7410 All-In-One InkJet...

    1 Answer

    The fax log will not load when prompted


    Hi,

    Please perform the resets given below and check if you are able to print the fax log. Please perform all the resets.

    *** Partial Reset ***

    * Turn on the unit
    * Disconnect the power cord from the back of the unit
    * Press # and 3 buttons simultaneously while plugging the power cord to the unit.


    *** Semifull Reset ***

    * Turn on the unit
    * Disconnect the power cord from the back of the unit
    * Press # and 6 buttons simultaneously while plugging the power cord to the unit.


    *** NVM Reset ***

    * Turn on the unit
    * Disconnect the power cord from the back of the unit
    * Press OK and Cancel buttons simultaneously while plugging the power cord to the unit.


    Wish

    Jul 31, 2009 | HP Officejet Pro L7780 All-In-One InkJet...

    1 Answer

    Hp t65 error code


    Step-1: Connect the All-in-One directly to power outlet
    --------------------------------------------------------------

    The surge protector may not supply sufficient power to the printer. To isolate the issue please remove the power plug of the printer from the surge protector and connect it to the wall jack directly.

    Being a All-in-One Machine it needs full voltage to be supplied while initializing Surge protectors supply suppressed voltage to the printer which leads to unexpected issues in the printer

    After performing the steps, please perform the steps below.

    Step-2: Power Cycle the All-in-One
    ---------------------------------------

    Follow the steps below to power cycle your all-in-one:

    1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.

    2. Wait 30 seconds.

    3. Plug in the power cable to All-in-One and also to wall outlet.

    4. Check for the functionality.

    After performing the above steps if issue persists, please perform the below steps.


    Step-3: Reset to Factory defaults
    -------------------------------------

    A partial reset will return user settings to factory defaults. On some models, language and country/region settings are also reset. Perform a partial reset of the product by following the instructions below.
    1. Unplug the power cord from the unit.
    2. Do the following according to your specific product:
      • HP Officejet G55 and G55xi series: Press and hold Minus ( - ) and 3 while plugging in the power cord.
      • HP Officejet G and K series:
      • Press and hold # and 3 while plugging in the power cord.
      • HP Officejet T series: Press and hold * and 8 while plugging in the power cord.
      • HP PSC 700 series: Press and hold Cancel and the Left Arrow while plugging in the power cord.
    3. While still holding the buttons down, plug the power cord back in. Release the buttons after the all-in-one begins to initialize. After RESET displays and the printer goes back to a ready state, the reset is complete.
    4. Try the print job again to see if this step resolved the issue.

    Jan 29, 2009 | HP OfficeJet t65 All-In-One InkJet Printer

    1 Answer

    Printer Wont Turn On Officejet 4315 all in one


    Hi, 


    Please follow the follwoing steps, 

    1) unplug the power cord at the both ends from the printer and wall outlet. connect to wall out let directly dont connect to 
    printer.
    2)Press and hold # and 6 while reconnecting the power cord to the product hold for 1 min after plugging the power cord, and 
    then release both buttons, this should resolve the issue.

    Regards,  raj_p5983

    Jan 26, 2009 | HP Officejet 4315v All-In-One InkJet...

    1 Answer

    IDS failure, call HP message comes up


    Hope this helps you. This error is caused by either a correct or incorrect detection of air in the manifold. The steps below will clear the error condition, which should solve the problem if it is caused by an incorrect detection of air. If there really is air in the manifold, however, this procedure will not solve the problem and the printer will have to be serviced. Step 1 - Remove all printheads CAUTION: Do not touch the printhead tower. Do not remove the printhead handle. Keep printheads out of the reach of children. Figure 1: HP 14 printhead c00042423.jpg 1 - Handle 2 - Tower
    1. Make sure the unit is plugged in and the power is turned on.
    2. Open the print carriage access door by lifting the handle until the door locks in place. The print carriage moves to the center.
    3. Wait two or three seconds, then unplug the power cord.
    4. Open the printhead latch. See the illustration below. Figure 2: Open the printhead latch c00042424.jpg
    5. Remove each problem printhead by lifting the printhead handle and pulling up. See the illustration below. Figure 3: Remove the printhead c00042425.jpg
    Step 2 - Reset the internal error state NOTE: This step must be performed before the printheads are re-installed.
    1. Close the printhead chute.
    2. Close the access door.
    3. Plug the power cord back in.
    4. Turn on the power. The front panel should read No Printhead. Will damage Product. Insert [color name] [icon] printhead now . NOTE: The carriage may make a grinding noise when you turn the power on. This noise is normal.
    5. Open the print carriage access door by lifting the handle until the door locks in place. The print carriage moves to the center.
    6. Wait two or three seconds, then unplug the power cord.
    7. Open the printhead latch.
    Before re-inserting the printheads, make sure all the electrical contacts have had at least five minutes to dry. Step 3 - Insert the printheads
    1. Place each printhead in its slot in the printhead carriage. The colored shape on the top of the printhead should match the colored shape on the proper slot on the printhead carriage.
    2. Press down firmly and evenly on both the front and back of the printhead, as shown in the illustration below. Proper seating is essential to making good electrical contact.
    Figure 4: Seat the printhead c00042431.jpg Step 4 - Close and check the printer
    1. Close the printhead carriage latch and make sure the loops catch the hooks. See the illustration below. Figure 5: Loops catch hooks c00042432.jpg
    2. Snap the latch into place.
    3. Plug in the power cord.
    4. Close the print carriage access door.
    5. Turn on the power.
    6. If the error clears, a message to align the printheads may appear on the HP Officejet D and HP Officejet 7100. Press Enter to align. If the error persists contact HP. Printhead replacement will not resolve this problem - the printer will have to be serviced.

    Jan 08, 2009 | HP OfficeJet D135 All-In-One InkJet...

    Not finding what you are looking for?
    HP OfficeJet 7110 All-In-One Thermal Printer Logo

    Related Topics:

    29 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...