Question about Philips Magnavox 27MS343S 27" TV

2 Answers

TV Remote not working.

We have been using the Sky remote with our old Beko TV for a while now both for Sky and to change channels on the TV, e.g. to switch to AV for games consoles etc. It is no longer working on the TV. We dug out the old original remote and it is not working either. We also tried all the codes on for the TV for the Sky remote but nothing seems to be working. Is it possible for the remote sensor to break and if so is it fixable

Posted by on

  • gdonnelly Jan 20, 2009

    eek!! just realise that this is in the wrong heading.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 325 Answers

You can test if a remote is not working:

get your mobile phone (as long as it has a camera on it)

put the phone in camera mode and point it at the top of your sky remote ( the end you point at the telly)
press some buttons on the sky remote while you look through your camera phone. you should see a red light. This is due to camera's not liking infrared. if you see the light then the buttons on the remote are working. If you dont then change the batterys and repeat if there is still no joy then you will have to get another sky remote.

if everything is working try this for me please.
TV
RED + SELECT
TV
0125 (Beko manufactors code)

press the power button if this switches your tv off then press the SELECT button to save if not press TV and then power again. repeat this process until it turns the tv off then remember to press the SELECT button to save the code.

hope this sort it out

Little Dish Fitter

Posted on Sep 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 139 Answers

Philips
0081
584,065,040,041,582,221,115,071,351,402
Try these i acnt find one for your model but sometimes others for the same make might work

Let me know,plz
JonnieC

Posted on Mar 15, 2009

4 Suggested Answers

  • 1 Answer

SOURCE: Philips tv

you probably need a hotel master remote, i.e. the philips rc2573gr:

http://salestores.com/philipsr.html

Posted on Nov 09, 2007

  • 1 Answer

SOURCE: tv code to use a rca universal remote

I have a remote for my tv by universal-remocon and can not find the manual with the code for a magnavox tv and how to program it. I have no code, it doesn't work.

Posted on May 29, 2009

  • 187 Answers

SOURCE: philips 21rf vardan tv

Check option code's.

Posted on Jul 29, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need code for sky remote to work with sanyo tv model number CE32LC4-B please?


Sky+ Remote Control Unit Programming Procedure Follow the steps below


1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 4 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.

  • If this works try the other TV functions.
  • If these work then the correct code has been selected.
  • It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.

If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.

You can also Visit Sky's Official Remote Code Finder.


Common Sky Remote Codes for your TV

(For a more comprehensive list see our Sky Remote TV Code Checker)

Aiwa 0106
Akai 0098
Akura 0042
Alba 0043
Amstrad 0063
Baird 0117
Bang & Olufsen 0118
Bpl 0115
Beko 0125
Beon 0899
Brionvega 0147
Bush 0157
Crown 0225
Daewoo 0092
Decca 0244
Dual 0257
Ferguson 0293
Fidelity 0294
Finlandia 0296
Finlux 0297
Fisher 0154
Funai 0179
Genexxa 0330
Goldstar 0056
Goodmans 0335
Granada 0340
Grundig 0345
Harwood 0361
Hinari 0365
Hitachi 0145
Itt 0384
JVC 0053
Loewe 0442
Matsui 0477
Memorex 0037
Metz 0491
Minoka 0921
Mitsubishi 0150
Nei 0514
Nikkai 0528
Nokia 0536
Nordmende 0537
Orion 0549
Panasonic 0051
Philips 0081
Pioneer 0166
Protech 0595
Pye 0600
Roadstar 0625
Saba 0645
Saisho 0649
Salora 0651
Samsung 0060
Sanyo 0159
Schneider 0665
Seleco 0672
Sharp 0093
Siemens 0680
Sony 0000
Soundwave 0702
Tandy 0741
Tatung 0049
Techincs 0250
Telefunken 0757
Thomson 0771
Thorn 0772
Thorn-ferguson 0936
Toshiba 0156

Visit Sky's Official Remote Code Finder for your TV here.

Click the link to download a PDF containing more Sky Remote Codes

Ask for help finding a code for your television here Sky Remote in our forums.

Jan 19, 2013 | Televison & Video

3 Answers

Sky navigtor tv code tv samsung


1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 4 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.
  • If this works try the other TV functions.
  • If these work then the correct code has been selected.
  • It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.
If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.

Common Sky Remote Codes for your TV

Aiwa 0106
Akai 0098
Akura 0042
Alba 0043
Amstrad 0063
Baird 0117
Bang & Olufsen 0118
Bpl 0115
Beko 0125
Beon 0899
Brionvega 0147
Bush 0157
Crown 0225
Daewoo 0092
Decca 0244
Dual 0257
Ferguson 0293
Fidelity 0294
Finlandia 0296
Finlux 0297
Fisher 0154
Funai 0179
Genexxa 0330
Goldstar 0056
Goodmans 0335
Granada 0340
Grundig 0345
Harwood 0361
Hinari 0365
Hitachi 0145
Itt 0384
JVC 0053
Loewe 0442
Matsui 0477
Memorex 0037
Metz 0491
Minoka 0921
Mitsubishi 0150
Nei 0514
Nikkai 0528
Nokia 0536
Nordmende 0537
Orion 0549
Panasonic 0051
Philips 0081
Pioneer 0166
Protech 0595
Pye 0600
Roadstar 0625
Saba 0645
Saisho 0649
Salora 0651
Samsung 0060
Sanyo 0159
Schneider 0665
Seleco 0672
Sharp 0093
Siemens 0680
Sony 0000
Soundwave 0702
Tandy 0741
Tatung 0049
Techincs 0250
Telefunken 0757
Thomson 0771
Thorn 0772
Thorn-ferguson 0936
Toshiba 0156

Jul 06, 2011 | Televison & Video

1 Answer

I have a Tosumi television connected to standard sky box but every time I turn on television it goes to another channel rather than the connected av channel. Also when I try to use sky controller to...


Hi,

Always turn on your TV with the Sky box (or any other external device you want to use) turned OFF. When the TV is on, turn on the Sky box by pressing the "Sky" button at the top centre of the remote control. This will ensure that the TV recognises that there is an external input and it will automatically switch to the correct channel. It also ensures that your Sky remote control isn't in TV mode.

If you switch your TV to standby using the Sky remote after watching, the next time you use the Sky remote, it's still in TV mode. This is why your TV channels are jumping around.

Hope this helps.

Oct 21, 2010 | Televison & Video

2 Answers

How do i get the tv on av without using the remote?


push channel down button through the channels, then it will go into av mode(video) by just keeping to press channel down. it will be channel below channel 02. just keep pushing channel down button

Nov 21, 2009 | Beko 324250WN 28" TV

2 Answers

I need to re tune my samsung tv but have no remote any ideas?


you can always use the button on your Tv itself.

ie menu = Menu
Channel up/down = take you up and down
volume = goes left and right.

follow these steps

Menu,
channel down button to CHANNEL
press the volume button along
channel down button to AUTO STORE
press the volume button to Start the scan.

right now you have your telly tuned in. What you could do it get an old sky remote off a friend/ neighbour. or buy from argos etc ( a lot cheaper then getting a replacement samsung one)

press the following buttons on the sky remote to program it to work with your samsung tv.

TV,
RED + SELECT
TV.
0060

try the volume if this works press SELECT to save this code if it doesnt press Tv then try the volume again. repeat this step until the volume works your telly. once it doest dont forget to press the SELECT button to save.

Now you will be able to change your volume use the number keys. if you also press the HELP button on the sky remote this will also change your AV / SOURCE I hope this post helps you out. When it does please leave a thumbs up for me Please

Cheers Little Dish Fitter

Sep 21, 2009 | Samsung LN-S3251D 32 in. LCD HDTV

1 Answer

Sky remote wont control on/off , volume, or terrestrial channels


Press tv on the Sky remote

press and hold select and red until the led blinks twice
type in 0 0 6 0
press the power button, if the tv turns off then the press select and the remote should work all the tv functions.

If the tv does not turn off then press tv then the power button and keep doing this until the tv turns off, once it turns off press select and it should work.

If you have any problems let me know

Dazz

Feb 15, 2009 | Samsung LW20M21C 20 in. LCD Television

2 Answers

Sky codes for beko 32' tv


on the sky remote press the following

TV
RED + SELECT (blinks twice)
TV
0125

press the volume button,if it works press SELECT if not press TV then VOLUME again repeat this process of TV then VOLUME until it works then press the SELECT button to save the code to your remote.

Enjoy

Littlle Dish Fitter

Dec 27, 2008 | Beko 324250WN 28" TV

2 Answers

Changing channels by itself


bought beko 32 wlu520hd when i change channel or volume the white indicator light on the tv flashes and starts going through all channels or volume just keeps going up .as if im holding down the buttons when im not , buttons on tv and remote do not respond. until i rub my finger over the senser on the tv, it stops but as soon as i press any button on the tv or remote it starts all over again .is this a fault in tv or is it static build up, does any one have the same problem , ive been on the beko web sight and cant find anything about this

Oct 05, 2008 | Beko 324250WN 28" TV

1 Answer

PHILIPS 32PF7331/12 LCD TV


Press tv on sky remote then press help ,channel list appears . goto tv set use onset channel change button to scroll to hd channel .press volume up button onset to select.

Sep 28, 2008 | Philips 26PF5320 26 in. LCD Television

2 Answers

Tv is stuck on av channel


no-not the tv try buying another remote from the manufacturer and that will solve the problem

Jan 06, 2007 | Grundig GF70-600 TV

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...