Question about 7701V Responder SST Remote

Open Question

I have a 7701 vipix viper alarm in my truck but it does not want to lock or unlock?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bigTROY502
  • 129 Answers

SOURCE: Viper 5901, Ford 2008 6.4/ When I use the trucks door keypad

If you use the viper remote to arm the alarm, you MUST use the viper remote to disarm the alrm prior to opening the door. The only REAL solution is to add the keyless entry feature to the viper system, and quit using hte factory remote all together.

Posted on Aug 09, 2009

  • 50 Answers

SOURCE: Viper SST 7701. I replaced

Try to relearn the tach by cranking the car and holding the valet switch(small black push button) until the LED lights solid.The try it again

Posted on Aug 14, 2009

  • 1 Answer

SOURCE: How do I lock my keypad

there is a way to do it in the manual which can be found at www.viper.com/support.... i did it by mistake and now can't figure out how to turn it off

Posted on Nov 27, 2009

kcarmax
  • 30 Answers

SOURCE: I have a Viper 470v alarm and the keypad does

Is the red or blue light (LED)on the dash lit up solid? If it is then the alarm is in valet mode. 2 ways to take it out of valet. 1) open a door and press lock, unlock then lock again on your Viper remote. 2) turn the ignition on then off and press your valet/override button. The LED should go out and the beeps and status should come back. BTW you can also put the Viper into valet mode using the 2 methods above.

Posted on Feb 24, 2010

  • 41 Answers

SOURCE: the alarm is on a

Your alarm got put into valet mode some how
.It's easy to reverse out of it back to normal. First look for a small black push button under the dash somewhere. It's called a valet button. Here are the steps.
1. open door
2.turn key on then off
3.then within 10 seconds hit that valet button once(your alarm light should be off. Tell you arm it again. Then it will blink)
Hope this helps

Posted on Aug 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a viper 5900 car alarm with the 7701 vpx remote and the lock and unlock are reversed. How do I fix this


according to Viper tech support (I emailed them your question):

Thank you for contacting Directed support!

You may need to reprogram the remote to your phone. Please use the following instructions to reprogram the remote:

To program the remote to your system please do the following:

1) open the driver door
2) turn the key to the "on" or "run" position
3) locate the valet switch (small black button under driver side of dash) and press once, release, then press again and hold
4) after the siren chirps one time press the lock button on the remote
5) the alarm will give you a unique confirmation tone
6) turn the key off (the same unique tone will be heard again)
Warm regards,

Nigel McGee I Customer Service Rep.
Viper Support

Apr 28, 2016 | Viper Vehicle Parts & Accessories

2 Answers

Viper remote won't open door lcks


Does the remote diarm the alarm? Do you hear the " chirp chirp" when you press the unlock button on the remote? If not, then the remote is defective or needs to be reprogrammed to the alarm. If you do hear the " chirp chirp" but, the doors do not unlock, then the issue is with either the wiring from the alarm or the vehicles power locks. Did it work before? Do you have power door locks?

Jul 21, 2012 | Remote Start System

1 Answer

I just purchased a 2007 Mazda3 S Sport Sedan and it came with a Viper 7701 intalled. I need to know where I can download the manual to help with turning off the alarm during thunderstorms and just general...


http://www.directeddealers.com/manuals/og/viper/G5301V_05-06post.pdf
the 7701V is actually the remote. The Viper remote start alarm system that it corresponds with is the Viper 5900.

Mar 21, 2011 | 7701V Responder SST Remote

1 Answer

My viper 5002 alarm i don't know witch wire's to use off the viper alarm's for the power lock's


The door lock wires for the Viper alarm are green (-)lock and blue (-) unlock. The Viper system only provides a negative lock/unlock pulse for the door locks. So, if you are working on a vehicle that has positive door locks you will have to install relays to change the polarity.

Nov 08, 2010 | 5002 2 Way Car Alarm with Keyless Entry...

1 Answer

I have a Viper 470v alarm and the keypad does everything it supposed to do as far as starting the truck locking and unlocking BUT it doesn't beep anymore and the screen doesn't reflect my status. It stays...


Is the red or blue light (LED)on the dash lit up solid? If it is then the alarm is in valet mode. 2 ways to take it out of valet. 1) open a door and press lock, unlock then lock again on your Viper remote. 2) turn the ignition on then off and press your valet/override button. The LED should go out and the beeps and status should come back. BTW you can also put the Viper into valet mode using the 2 methods above.

Feb 23, 2010 | Directed Electronics 479V Remote Gen 2...

3 Answers

The alarm doesn't chirp and no flash of my headlights anymore. Also the blue light stays on the little receiver/antenna on the windshield wheather it is locked or not. What is the problem?


sounds like the alarm went into valet mode. that's usually what a solid blue light means on most viper alarms. check your owners manual on how to take the alarm out of valet mode. with the 5701 alarm its usually done with the remote. hope this helps

Aug 04, 2009 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

Not finding what you are looking for?
7701V  Responder SST Remote Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Parts & Accessories Experts

Tre Elkins

Level 3 Expert

643 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Joseph Gallucci

Level 2 Expert

120 Answers

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...