Question about Sewing Machines
The machine is in great condition. seem to thread fine and when start won't move through the fabric..
Something could be wrong with the feed dogs, it's would be a
good idea to have them checked.
Posted on Jan 08, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I once heard from a great sewing instructor that if the problem is on the back of the fabric then it is a spool to needle problem.... if the problem is on the top of the fabric, then it is a bobbin problem. Check your machine for dust and stray threads. Check your bobbin casing for dust and stray threads.
Posted on Dec 14, 2008
i think you have not looped the thread around the tension on the top before putting it onto the bobbin. you need to wrap the thread in a circle around the sphere near the regualr threading lines.
Posted on Dec 07, 2008
SOURCE: ELNA 7000 SEWING MACHINE
If you bend over the front of the machine, you will see a slider switch on the back of the machine, and there is a small "button" at the bottom right of the switch (your right). If you push this button down, you can slide the slider switch to your right and the feed dogs will go up.
Posted on Mar 26, 2009
For normal everyday fabric, tension should be 3-5.
If it is looping on the bottom, the problem is the threading of the machine. If it loops on the top then the problem is with the bobbin.
Posted on Apr 19, 2009
try to rethread the machine all the way back to the spool of thread and check the top and bottom tensions on scrap of same fabric
Posted on Dec 13, 2009
Tips for a great answer:
Oct 15, 2017 | Sewing Machines
Apr 25, 2017 | Sewing Machines
Aug 19, 2012 | Sewing Machines
Aug 05, 2012 | Brother PC-420
Jun 05, 2012 | Juki Sewing Machines
Feb 26, 2012 | Sewing Machines
Aug 01, 2011 | Euro-Pro Dressmaker 998B
Jun 08, 2009 | Euro-Pro Dressmaker 998B
167 people viewed this question
Usually answered in minutes!