Question about Printers & Copiers

2 Answers

How to remove h5-01 error code on a sharp arm550n copier

Posted by on

  • Subzero1 May 06, 2009

    I have the same problem, but I dont know to get to the tech mode.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

This is either:
10 continuous POD1, POD2 or PPD2 JAM
OR
Other models this indicates too many fuser jams. The fuser error reset code will reset the machine so it will run after the problem is fixed.First remove any jam in the fuser then enter tech mode;
press program, * ,clear, * enter 1 4 press start then turn machine off and then back on.

Posted on Jan 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you enter "tech mode"?

Posted on May 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sharp mx 2300N error code H5-01


http://www.copytechnet.com/forums/sharp/76512-sharp-mx-2300n-error-code-h5-01-a.html

Feb 15, 2015 | Sharp MX-2300N Color Copier

1 Answer

How do I fix light copies on a Sharp ARM550N copier?


Check the exposure setting. Which is 46 sub number 2. If that doesn't help, you may have to replace the developer.You need two bags of developer. Good luck.

Apr 16, 2014 | Kyocera Printers & Copiers

1 Answer

I have Sharp copier AR-M236 with error code:f2-04, how can i remove this error?


That error is a bad CRUM. Replace developer unit use only Sharp supplies. The chip on the developer unit doesnt match with the machine.

Aug 22, 2010 | Sharp AR-M237 Copier

1 Answer

Trying to network my sharp arm550n, i cannot find where to set a static ip


Press YSTEM SETTINGS button. On screen KEY OP PROG > enter code (00000 default) > NETWORK SETTINGS > INTERFACE > IP SETTINGS. Ensure DHCP is deselected ( touch the tick box to remove tick mark) and enter IP details. Select OK and then press CA button. Reboot machine for settings to take effect.

Apr 30, 2010 | Sharp AR-M550N Copier

3 Answers

Sharp AR-M208N copier with error code U2-40. What


reset u2
press c -interrupt-#-interrupt
press 16
press start
machine off
again machine on
remove this signal.

Jan 20, 2010 | Sharp AR-M208N Copier

2 Answers

Sharp ARM550N error F3-12


You will need to reset the error code. Try crop 15 or 14.

Dec 08, 2009 | Sharp Printers & Copiers

1 Answer

Sharp Copier AR -407 Error code H3-00


H3-00 means there was a problem in the fuser unit of the copier - a temperature problem. The correct temperature is not reached within a certain time.
It could be a thermostat or thermistor problem - both monitor temperature. you could remove the fuser unit and make sure these items are clean - no build up on them. there should be a center and side thermistor.
You can reset the error code in SIM mode by pressing the following keys one after the other "P" "interupt" "C" "interupt" then 14 and start/copy key. confirm if required. make sure the copier is restarted afterwards.
If the error persists then you may need new thermistors.
Hope this helps.

Apr 11, 2009 | Sharp AR-407 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

6,392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...