Question about Haier HWD1000

2 Answers

Error code 8

Haier 1200 spin 7kg washing machine error code 8, the book says water exceeds protective level? i have no idea what this means please help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 41 Answers

Could be water valve stuck open/ malfunction on coil. or possibly level control valve.

Posted on Sep 03, 2009

  • yusufdvm Mar 13, 2011

    Please my Haier shows error 5. What could be the problem?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Pleas help me

Posted on Aug 24, 2009

  • rchlsprng Aug 24, 2009

    my haier washing machines keep saying error8

×

2 Suggested Answers

blueextc3221
  • 15935 Answers

SOURCE: hiaer hw-c1270tve-u washing machine error code 8

It appears your pressure switch has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error E1 for washing machine


Lots of info on E1 for different makes.

  • How to repair a Samsung washing machine with error code E1 ... https://www.quora.com/How-do-I-repair-a-Samsung-washing-machine... How do I repair a Samsung washing machine with error ... If your Samsung Washing Machine is showing error code E1 then ... How do I clear bosch washing machine error ...
  • E1 error in washing machine? ' Yahoo Answers https://in.answers.yahoo.com/question/index?qid=20131129013237AA7oiKP
    • RESOLVED
    • 7 POSTS
    • 6 TOTAL ANSWERS
    2013-11-29 · E1 error in washing machine? ... Haier washing machine error code E1? LG Wave Series Washer LE error message? Washing machine error code? ...
  • My washing machine is displaying an error code. What does ... www.samsung.com/my/support/skp/faq/1033803 My washing machine is displaying an error ... E1. Water supply error. ... · Check that the level of the drain hose is not lower than the base of the washing machine.
  • Related searches for Error E1 for washing machine
  • Samsung Washing Machine 4E and E1 Fault - Help & Advice https://www.northlondonappliancerepairs.co.uk/error-codes/samsung...
    • 4.3/5
    • 46 RATINGS
    Samsung Washing Machine 4E and E1 Fault. Samsung washing machine Not filling in allocated time error code 4E and E1 Fault.
  • Help & Troubleshootings - Haier ZA Products Website www.haier.com/za/help_and_troubleshootings/faq/washing_machine Help & Troubleshootings. ... Too much water in the washing machine ... Error Code-control panel display "E1" Question : Error Code-control panel display "Lock"
  • Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g
    • BY HOW-2-REPAIR.COM
    • 9 MIN
    • 19K VIEWS
    2015-11-24 · Video embedded · ... machine-error-code-4e-and-e1-fault-not-filling-in-allocated-time/ Samsung washing ... Samsung washing machine error code 4E and E1 ...
  • Samsung washing machine error code 4E, E1, Fault Not filling www.how-to-repair.com/help/samsung-washing-machine-error-code-4e... Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the ...
  • Hoover error code E1 - White Goods Help www.whitegoodshelp.co.uk > ... > Washing Machine Error Codes Hoover error code E1. ... You need to watch the washing machine to see when it aborts to get an idea which of the three areas to look at.

  • Jul 01, 2016 | Washing Machines

    1 Answer

    My Fisher & Paykel 708 smart drive washing machine won't starts and beeps.


    That is Error code 9
    9.
    (00001001) Phase 1 to 5 - Size Error
    Phase 4 to 5
    The Display size switch setting does not match that stored in memory.
    Action - Reselect the size of Smartdrive by using the SIZE SETTING MODE. Push and hold
    the water temp up button, then press the power button to enter SIZE SETTING MODE. Three
    LEDs are used to identify size. The cold water temperature LED identifies 5kg. The low water
    level LED identifies 6kg. The hold spin speed LED identifies 7kg. If the product has not been
    setup before all 3 LEDs will be on. To set the size for 5kg push the wash temp up button then
    the power button. To set the size for 6kg push the water level up button then the power button.
    To set the size for 7kg push the spin speed up button then the power button. This locks the size
    into memory. To check the size is set, start a cycle.

    Dec 20, 2012 | Fisher and Paykel Washing Machines

    1 Answer

    Hwd-c1000txveme-u error code 8


    Hi from retired Englishman in SW France,
    The only reference to 'E08' I have is that there is a problem 'water level exceeds protection value'. Water level detection may not be operating correctly and requires a service engineer's attention I suggest ;-0(
    If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
    Thanks and good luck!
    John C

    Jun 24, 2011 | Haier HWD1000

    1 Answer

    On my Haier HWD1000, I keep getting error message E11... what does this mean?


    Error E11 means either:

    The water level can not
    reach the reset water level
    within 5 minutes

    OR

    The water level can not
    reach the setting water level
    within 8 minutes

    What this means is check your water supply for sufficient pressure and if for some reason it stops and starts (eg. well drawn water with a small reservoir sometimes.)

    You may have to make sure that there are no other water uses going on at the same time.

    Jun 21, 2010 | Haier HWD1000

    1 Answer

    My lg 7KG 1405F model in does not complete the washing cycle stops at rising (oe) is the code


    OE is drain error, which means that the machine has detected that the water level is not lowering quickly enough...Probable cause is a blocked pump filter...Check via small door at floor level..Unscrew pump cover and clear filter....Remember that all water will drain from this point, so drain machine first...Leaning the machine back can help...Good luck....Nomess

    May 20, 2010 | LG WM-1480FHD Front Load Washer

    1 Answer

    Hiaer hw-c1270tve-u washing machine error code 8


    It appears your pressure switch has failed in this instance.

    For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
    I recommend both sites because ...


    FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

    PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
    RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


    If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
    In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


    Anything too complicated or beyond your scope should be handled by a professional.

    If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

    Dec 29, 2008 | Washing Machines

    1 Answer

    HAIER HW-C1460TVEME-U


    Err1 : Door not properly shut
    Err2 : Drainage error (clean filter check hose
    Err3 : temperature sensor short circuit
    Err4 : Heater error
    Err5 : water fails to meet specified level within 8 mins check tap, water pressure
    Err6 : motor error
    Err7 : motor error
    Err8 : water exceeds protective level check circuit
    End : end of wash cycle
    Unb : after the last rinsing cycle finishes spinning fails completelt due to unbalance of the laundry

    only reason I know is i looked through the manual after getting it myself could be something to do with running a bath while washer on or something perhaps not enough water getting in if powder channel blocked

    Sep 12, 2008 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

    3 Answers

    Error code 7


    The error code 7 is in fact a motor error.
    The motor that drives the spin cycle has become faulty. The only solution now is to get an engineer in to fix it or get it sent away to get repaired.

    Sep 08, 2008 | Haier XQG50-11 Front Load Washer / Dryer

    2 Answers

    I have the HAIER HW-C1260TVE-U washing machine, and for some reason it won't do the spin cycle? at the end of the programme in says something like "UNB END". Any ideas?


    Hi Mate;

    Just had the exact same problem with the spin cylec and now its stopped completely, I was getting ERR 7 on the display, its telling you that there is something wrong with the motor.checked the motor and found that one of the Carbon Brushes was sticking/Stuck, Just 2 phillips head screws and the carbon brush is out, mine had a bit of melted plastic/casing snagging the Carbon brush, i just jusd a bit of fine sand paper to clean the Brush, put it all back together and lo and behold everyting works.
    Hope this helps

    Listed below are all the error codes:

    Display messages:
    Err1: Error message. Door is not properly shut 20s after program is started.
    Correction: Shut the door properly.
    Err2: Error message. Drainage error, water not emptied within 4 min.
    Correction: Clean the filter and check the drain hose for blockage. If error still exists, please contact the maintenance personnel.
    Err3: Error message. Temperature sensor is not properly connected or damaged (display at the end of a program).
    Correction: Contact the maintenance personnel.
    Err4: Error message. The heater may be broken or the desired temperature is not met within the specified time due to an overloaded laundry (display at the end of a program).
    Correction: Reduce the load and restart, or contact the maintenance personnel.
    Err5: Error message. The required water level is not reached within 10 min, or the water level exceeds the protection value.
    Correction: Check to see if the tap is turned on and the water pressure is correct. If error still exists, contact the maintenance personnel.
    Err6: Error message. Motor speed error. It may be not properly connected or damaged.
    Correction: Contact the maintenance personnel.
    Err7: Error message. Motor overheat protection or is damaged.
    Correction: Contact the maintenance personnel.
    Err8: Error message. Water level exceeds protection value.
    Correction: Contact the maintenance personnel.

    Regards

    Bull

    Jul 29, 2008 | Washing Machines

    1 Answer

    Bosch Excel 1200 wahsing machine, when trying to activate spin, it shows the normal 10 minutes, but then goes straight from 8 mins to 1 min and items arent properly spun


    bosch exxel 1200 washng machine
    has error message 04 and wont drain or spin

    what does this mean?

    can you help?
    have lost instruction book

    Mar 27, 2008 | Washing Machines

    Not finding what you are looking for?
    Haier HWD1000 Logo

    1,679 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Haier Washing Machines Experts

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1456 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Owen Barnes

    Level 3 Expert

    835 Answers

    Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...