Question about Tasco 49070800 Spacestation(r) 70az Refractor Telescope (600 x 70mm)

1 Answer

Need eye peice - Tasco 49070800 Spacestation(r) 70az Refractor Telescope (600 x 70mm)

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 227 Answers

Measure the diameter of the diagonal. If it is 1.25 inches, you are in luck. There are many eyepiece vendors out there. (Astronomics, Agena Astro, Owl Astronomy- to name a few.) If your diagonal is .965inch diameter, the best answer is to get a .965 to 1.25 hybrid diagonal. >965 eyepieces are usually cheap junk. Your telescope came with a H25, H10 and SR4. Ok if you are living in 1641AD but terrible eyepieces for today. Note: your telescope diameter is 2.75inches (70mm) maximum magnification is about 137X. The most powerful eyepiece you can use is 5mm, and that is only on perfect nights.

Posted on Jan 08, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to disassemble my bushnell sportsman rifle scopes coz i wnt to clean it

On my Bushnell scope I have an adjustable angle ring that will bring in the view, it is held in place with 1 screw. remove it and pull down towards the windage and elevation adjustment screws. There are 3 tiny phillips screws, remove them. Then unscrew the end of the Eye Peice end peice with the lens in it. inside on the outer edge of the main tube there is a locking ring that keeps the eye peice from unscrewing off, remove it and unscrew the entire eye peice. you are now ready remove the inner tube. Be careful here this is where you can damage the cross hairs and lose the leaf spring that maintains pressure against the windage and elevation screws. When you reassemble after cleaning and with the elevation screw at 12 o'clock and windage screw at 3 o;colck, the leaf spring will be in the 7 or 8 O"clock position, it just sits in there up against a little ridge inside, with the bow facing to the center. Back off the elevation and windage screws all the way so they don't block the inner tube from going in all the way. Once it is in adjust it so the cross hairs are orented correctly and put it back together. If you want to refill with Nitrogen remove the front lense and take to someone that fills tires with Nitrogen and inject the nitrogen into the scope, Quickly reinstall the front lens as nitrogen is about 3% lighter than air and if you take too long it will all escape.
This worked well for me. Good Luck and Happy shooting

Apr 27, 2011 | Bushnell Sportsman 4x32 Riflescope (4x32...

1 Answer

Dosn"t turn off can i get

is there a peice of paper blocking the sensor? but you can get a new eye at

Mar 20, 2011 | Royal VF1000MX Shredder

1 Answer

Sony dcr-dvd101 eye peice broken how where can I have repaired nyc ny

in any camera dealer should have that eye pieces
or repair shop
hope that will help you

thanks allan

Sep 25, 2010 | Sony Handycam DCR-DVD201 DVD Camcorder

1 Answer

Need to find a eye peice for a simmons telescope model 6450

Many on line retailers-
Here is one:

Sep 19, 2010 | Meade Optics

2 Answers

1998 Mercury Grand Marquis I'm looking for the electric eye for the automatic light system. Could I cover this eye and have lights on whenever I drive?

On most Ford/Mercury/Lincoln cars produced in that era, the "eye" is on top of the dashboard, usually in the center and has a sort of filter over it. It will have the appearance of having a grill-like exterior like a set of 3 or 4 parallel lines. To answer your second question, yes, it's possible to cover it and have your lights on all the time.

Nov 26, 2009 | Mercury Marquis Cars & Trucks

1 Answer

Will it work without the eye peice and Diagonal

It will work without the diagonal (maybe) if you have enough focus range BUT it must have an eyepiece. Measure the hole. It's eithe .965 or 1.25 inch-- you can buy eyepieces at many online retailers. Here is one:

Oct 20, 2009 | Bushnell Deep Space 78-9512 (120 x 60mm)...

1 Answer

I just recieved an acer aspire one with a crystal eye webcam. it will take still pictures but i do not know hw to make it take videos. any suggestions?

to take video you will probably need another peice of software (probably included). See if you have any movie moaker programs on your computer or something along those lines.

Jun 26, 2009 | Acer Aspire One PC Notebook

2 Answers

Lost the rubber eye cup to my Leitz 10x40 binoculars

for leitz parts call18002220118 X 217 for zeiss parts call 18004413005 X3...hope this

Dec 06, 2008 | Zeiss Classic B/GA 524013 Binocular

1 Answer

Headlight Sensor


Dec 03, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
Tasco 49070800 Spacestation(r) 70az Refractor Telescope (600 x 70mm) Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tasco Optics Experts

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers


Level 3 Expert

80608 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Tasco Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides