Question about Quicksilver Watches

Open Question

Display on my Quicksilver Fragment watch is useless

Hi I bought a Quicksilver Fragment watch some months ago (digital) and it worked just fine until a few weeks back. While i was wearing my watch i somehow managed to press one or more buttons in a certain order and now it's just displaying a lot of digits and the clock/calendar is not working at all. I have lost my manual and i have tried to send a mail to Quicksilver for assistance (no luck getting a response). Tried several times to press the buttons in all different orders, but it didn't help much and i still have a pretty useless watch. I have taken a picture of the display (as a picture can say more than a thousand words), but doesn't seem like it's possible to attach files to my query. So my questions is basicalli if anyone have experienced similar kind of problem with this watch, or have a link to the user guide for this model. Thanks in advance

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Fossil JR8096 - Display Not Working

hi i have a watch very simalar. They run on two seperate batteries. sounds like one of them is dead. get the digigtal one replaced

Posted on Aug 24, 2007

Ad

SOURCE: Tissot T-Touch-Works fine until just about the end of the warranty

I suggest writing to Tissot in both your home country and in the head office in Switzerland. Use both email and paper letters. If you can provide documentation of the attempted fixes that will really help your case. Since you had a history of problems you have every right to ask them to stand behind their product. Perhaps there is a new warranty on the replacement movement, for example. You have nothing to lose except a bit of time, paper and postage. You could even ask your dealer to back you up with this -- he or she will still get paid for the work if Tissot agrees to extend the warranty.

Posted on Dec 19, 2007

  • 1 Answer

SOURCE: Setting the hands on this watch

press your "mode" button 5 times until it says on lower display "H-SET". Then press the "adjust" button until it beeps.

Now hold the "forward" button and the minute hand is moving.

Enjoy :o))))

Posted on Feb 03, 2008

  • 3 Answers

SOURCE: Fossil Big Tic Watch - setting the correct time on the digital display

The watch is scrolling through the seconds, and is not something that needs to be set. If there is a bottom it is only there to change the way the seconds are scrolling? There are many different types of these, but most are just standard seconds.

Posted on Apr 06, 2008

  • 8 Answers

SOURCE: Pod Watch, Trying to change the digital date

Somehow I have put mine right, I held the top lefthand button in and cycled using the bottom lefthand button, hope you can do the same.

Regards

Chris

P.S. If you get a copy of the instruction it would be nice to have a copy or the link.

Posted on Aug 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the DATE ( on top right of watch face ) on the QUICKSILVER ACCENT DIGITAL WATCH for men ?


You will need to pull out adjuster and turn to
right or left depending on the date you have on it.
Today 11th so if on 1st turn clockwise until you get
to 11th.
LUCK

Oct 11, 2014 | Watches

1 Answer

Need a manual or instructions for mt watch please!!!


TIME AND DATE
1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
2. Press ADJUST to set SECONDS to zero.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.
5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
6. Press MODE when done.
7. To display DATE from Time display , press START/STOP.
8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.

ALARM AND HOURLY CHIME
1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
2. With time displayed, press MODE to select Chrono Mode.
3. Press START/STOP to start.
4. Press ADJUST to view lap time. Press again to resume lap timing.
5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
6. Repeat for successive laps.


Have fun :)

May 04, 2017 | Watches

1 Answer

Quicksilver arcade watch alarm


Hey Malcolm, just bought this watch so I hope it is the same. Press the MODE button (bottom left) until you get AL. Then press the STAR/LAP (top left) this gives you the options of turning it off : ON with Alarm or ON with Alarm and CHM (I think this is the hourly chim) or OFF. (Located above the Quicksilver brand mark) Hope this helps!
Carla

Nov 24, 2011 | Watches

1 Answer

I bought this watch citizen BL5334-04E year ago,


Mechanically operated date changes occur at 12 O'clock. If your watch thinks it is midnight when it is noon then it will change date.

The solution is to wind your watch on 12 hours.

Apr 17, 2010 | Citizen Eco Drive Perpetual Calendar...

1 Answer

6 monts old quartz model vz03-dd 2 weeks ago hands stoped, after adj. runs fine now all stops , no hands movement, no display.


Replace the battery. Does not matter watch is just 6 months old - battery was fitted long before you bought it.

Jan 24, 2010 | Watches

1 Answer

It stop working, analog and digital


Unfortunately the watch may have been on display for some time and the battery may have run low. If you go back to the place of purchase they should change the battery free of charge. Make sure that you have the watch resealed to manufacturers water resistance rating or you void Sectors warranty. The retailer may also replace the watch with a model in stock but you may have the same issue with display time effecting the battery life.

Sep 17, 2009 | Sector 3251908015 Mountain Master watch

1 Answer

Screen not working T Touch Titanium (Totally Useless)


I suggest you have to find the decent watchmaker and do not use dealers services anymore.In my opinion you have been overcharged in both cases.
Consider replacing touch screen if it is damaged and then sell it on ebay (anyway you do not like it). For watch in working order you have to get quite a decent money. If you gonna sell it as it is, you will get pennies only.
Later just buy another make and forget about this unlucky example. :))

Dec 07, 2008 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Setting the hands on this watch


press your "mode" button 5 times until it says on lower display "H-SET". Then press the "adjust" button until it beeps.

Now hold the "forward" button and the minute hand is moving.

Enjoy :o))))

Nov 28, 2007 | Casio Green G-Shock Street Rider with a...

1 Answer

Tissot T-Touch-Works fine until just about the end of the warranty


I suggest writing to Tissot in both your home country and in the head office in Switzerland. Use both email and paper letters. If you can provide documentation of the attempted fixes that will really help your case. Since you had a history of problems you have every right to ask them to stand behind their product. Perhaps there is a new warranty on the replacement movement, for example. You have nothing to lose except a bit of time, paper and postage. You could even ask your dealer to back you up with this -- he or she will still get paid for the work if Tissot agrees to extend the warranty.

Nov 23, 2007 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Fossil Big Tic Watch - setting the correct time on the digital display


The watch is scrolling through the seconds, and is not something that needs to be set. If there is a bottom it is only there to change the way the seconds are scrolling? There are many different types of these, but most are just standard seconds.

Oct 25, 2007 | Fossil JR8096 Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quicksilver Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Quicksilver Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...