I got error code canon ipf500 hardware error 1.What is

All questions need FULL 'make model (what is is)' or we just guess!

Canon imagePROGRAF iPF Error Code 03130031-2F2A

ProPrinting Systems https://proprintingsystems.com > canon-imageprograf-...

Hardware error 03130031-2F2A means your imagePROGRAF cannot detect the LF home position. It also displays a message 'directing you to restart the printer.

Canon IPF 750 error code 03130031-2F2A

Copytechnet https://www.copytechnet.com > ... > Canon
Jan 31, 2018 - 2F2A is a Linefeed Error, maybe the Lubricant on the polished Metal Bar becomes sticky, causing the Carrier run too heavy. Clean thoroughly and ...
codigo en ipf 700 -710 03130031 2F2A - Copytechnet
Sep 10, 2019
Tag: 03130031-2f2a - Search Results - Copytechnet.com
Sep 8, 2019
IPF8300 error 03130031-2F25 - Copytechnet
Sep 8, 2019
Canon IPF 710 error 03130031 2F2A - Copytechnet
Apr 30, 2019
More results from www.copytechnet.com

Canon iPF5100 - Error Code: 03130031-2F2A

PrintCopy .info https://printcopy.info > code=03130031-2F2A
Code: 03130031-2F2A · Description: Feed roller home position error. · Causes: Feed roller encoder film, feed roller HP sensor, feed motor, or main controller PCB ...

Can IPF 750 Error# 03130031-2F2A. Sorry! Canon ...

JustAnswer https://www.justanswer.com > printers > avaqq-ipf-75...
Dec 13, 2017 - Unplug the power cord from the wall outlet. Press and HOLD the Power Button for 60 seconds. Plug the power cord back into the wall outlet.
1 answer · Top answer: Thanks for choosing Just Answer. I'm Kumar and I'll assist you today. Do you a

The B200 Canon printer error can be caused if you have a faulty or improper printer print head. You can easily fix the canon B200 with simple methods.

·Clean the printer print head
·Check the ink cartridges
·Reset the printer

Read continue the steps to fix the B200 canon printer error. Also find the more canon printer error codes and their solutions.

Error 03130031-2F13 1. Check for abnormal carriage drive load a. Faulty carriage idler pulley

https://www.skypesupports.com/

ENGLISH only on Fixya please

I HAVE A HARDWARE ERROR 03130031 - 2F17

I HAVE A HARDWARE ERROR 03130031 - 2F17, IN A CANON iPF8000 PLOTTER, COULD YOU TELL ME WHAT IT IS ABOUT AND HOW TO SOLVE IT?

Canon imagePROGRAF iPF Error Code 03130031-2F17

https://proprintingsystems.com > canon-imageprograf-i...
The 2F17 error is a Platen fan lock detection error. Your Canon imagePROGRAF printer will show this error when the lock signal has been supplied ...

You can try the head replacement mode ,take out the left head,clean contacts on the head and on the head board.Put the head back in ,and power up.

See if it solves the issue.If not ,than probably ,something else is going on ,or you just need a new head.What is the life time of the heads??

The purge unit sucks ink out of the head ,in a (one of the) cleaning cycle(s).Check the left head pad ,for dried ink.

As a precaution ,when taking the head out ,and cleaning the contacts in the printer ,disconnect the power cord from the mains.
If you need more help you can get ipf500 service manual from the below link:
http://goo.gl/ngye6L
Good luck

how to repair b200 error code on canon MX870 printer?

Hello and Welcome to FixYa!

According to Canon's documentation, Error B200 is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board, a physical hardware malfunction.

To solve it:
Turn off the machine, and unplug the power cord of the machine from the power supply. Again connect it and turn on.
If the problem is not resolved, then best option is to take it back where you purchased it or contact Canon service center about the error code or To get support by Canon on phone, then call at 1-800-OK-CANON (1-800-652-2666)
They will surely solve it.

I hope this solution helps you
For further assistance, I am here to help.
Thank you and Keep Visiting FixYa!

Hello and Welcome to FixYa!

According to Canon's documentation, Error B200 is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board, a physical hardware malfunction.

To solve it:
Turn off the machine, and unplug the power cord of the machine from the power supply. Again connect it and turn on.
If the problem is not resolved, then best option is to take it back where you purchased it or contact Canon service center about the error code or To get support by Canon on phone, then call at 1-800-OK-CANON (1-800-652-2666)
They will surely solve it.

I hope this solution helps you
For further assistance, I am here to help.
Thank you and Keep Visiting FixYa!

Hello thanks for using FixYa
According to Canon's documentation, Error b200 is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board, a physical hardware malfunction.

To solve it:
Turn off the machine, and unplug the power cord of the machine from the power supply. Again connect it and turn on.
If the problem is not resolved, then best option is to take it back where you purchased it or contact Canon service center about the error code or To get support by Canon on phone, then call at 1-800-OK-CANON (1-800-652-2666)
They will surely solve it.

For Further assistance, I am here to help,
Thanks, Keep Visiting FixYa

Regards:
Uxair Shah

The PCI bus error is detected by the ASIC. - Logic board problem