Question about Husqvarna Rose

1 Answer

Maxhine stops embrodery and goop icon flashes

Embrodery attachment is working great then suddenly stops and the hoop icon is flashing and I can't get the project to continue. What do I need to do I am sur it is something simple I just can't figure it or and there's no manual

Posted by on

  • Ann Barrett
    Ann Barrett Jan 23, 2013

    Discovered the probleam is that Ie tried to move after the embroidery started (I had stopped the machine) and it would not move. During the process I also learned the machine works GREAT if I use embroidery thread in the bobbin instead of bobbin thread. Made a big difference. Everything works so great now and the designs look wonderful. I'm using Coats&Clark on the bobbin but really good thread on the top. Hope this helps others and thank you guys who have replied to the thread alot of wonderfu information that is proving to be extremely helpful.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Husqvarna Expert
  • 104 Answers

Hae you tried re-engaging the hoop in the hoop lock on the embroidery arm. If that temporarily solves the problem my guess is that the hoop sensor in the arm is just at the verge of being out of adjustment and any pull on the hoop moves it enough to cut the signal.

Posted on Jan 22, 2013


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1116 Answers

SOURCE: I am ready to embroider and a flashing hoop icon

Refer to your manual, it could mean the hoop is not making contact with the sensor or you are using the wrong size hoop for the selected design.

Posted on May 19, 2010

SOURCE: fabric wont's move independently

check to see if your bobin winder is in the down position

Posted on Jan 19, 2008

  • 4 Answers

SOURCE: designer embrodery machine wint start.

wait till it reaches normal room temperature,and try again, certain elements in the operating computer do not like to be frozen.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have an Huskvarna Designer SE that stoped on an embrodery work and cycle power off than on. Is this an unknown problem that reset the power of this machine ?

Machine has built in temprature breaker on the motor that resets itself when it cools off. Make sure the plug into the machine is tightly inserted.
Embroidery Services
San Diego, CA

Sep 09, 2017 | Sewing Machines

1 Answer

Trouble with my unit pe-780-d

Needs a needle and thread

Aug 07, 2012 | Sewing Machines

1 Answer

Brother PC 700 embrodery machine

change the needle--flat side goes to the back of the machine
check the needle plate for burrs
check bobbin case for burrs

Apr 06, 2012 | Sewing Machines

1 Answer

Bernette embrodery 600 switching it on keeps running

the speed control sensor in foot control may be bad or possibly a little something has the foot control gummed up in a on position whereas it is not completely popping up all the way to allow it to go off :) best educated guess.

Mar 30, 2012 | Bernina Bernette Deco 600

1 Answer

I cant get my machine to sew, i can do embrodery but i cant sew.

sounds like part of the computer is messed up & the machine needs to be serviced

Mar 22, 2012 | Singer CE-200 Quantum Futura Computerized...

1 Answer

My bernina 440 qee embrodery module reports thread break and stops every 30 stitches alhough the thread is OK - can someone help?

The check spring might need to be adjusted. There's a flag and sensor mounted to the check spring that tells the computer when the thread has broken or run out. Might want to have a Bernina dealer check it out.

Apr 29, 2011 | Sewing Machines

2 Answers

How do i leave a space between words to be embroidered?

I have the disney embrodery machine and with it there is a "_" in it that dash is my spacer and on my it doesn't sew the dash in.

Dec 28, 2009 | Brother PE-150V Computerized Sewing...

1 Answer

Designer embrodery machine wint start. left in car and is very cold but mot frozen? just click when i power it up

wait till it reaches normal room temperature,and try again, certain elements in the operating computer do not like to be frozen.

Jan 28, 2009 | Husqvarna Designer I

1 Answer

Fabric wont's move independently

check to see if your bobin winder is in the down position

Dec 26, 2007 | Husqvarna Rose

Not finding what you are looking for?
Sewing Machines Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides