Question about All-Pro Heating & Cooling

Open Question

Universal 40-FAC All Pro SPC-10 ignition failure

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tbugger
  • 232 Answers

SOURCE: need igniter for a k150-fa all-pro spc-k150

Jabswap- describe the physical charactoristics of the exixting ignitor.
IE: shape, wire color, etc.

Posted on Nov 14, 2008

FurnaceGuy
  • 74 Answers

SOURCE: blower runs and have ignition and fuel but fire

Most likely the flame sensor. The sensor has only one wire to it and is L shaped. Unplug the heater and take some steal wool and gently clean the the sensor.

Posted on Jan 02, 2010

heatman101
  • 43501 Answers

SOURCE: heater is puffing smoke when i turn it on and not

Hi,


Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters





Torpedo Heater Pump Pressure Adjustment


heatman101

Posted on Jan 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 40-FAC heater will not ignite and run. The igniter has been replaced. What should I check next?


These models require electrical power to run the blower fan.
When you connect the electrical cord, the fan should turn on, then you should be able to start / ignite the propane. if the fan does not turn on when you connect the power cord, you will not be able to ignite the propane.

Dec 09, 2014 | All-Pro Propane Garage Shop Heaters - All...

1 Answer

I have a spc-40 heater i can not get it to stay fired up i press the fuel button and it does lite but after 15 to 20 i release button and it goes out what do i need to do to make it work again


Ensure all your connections are tight and not leaking. I would shot off the tank using the valve on the top. Disconnect it, then re-connect it. Once connected, ensure the fan on the unit starts to turn. Then you can slowly open the valve, give it a good 4-5 turns to ensure it is open. They try the ignition sequence again.

Feb 28, 2011 | All-Pro Propane Garage Shop Heaters - All...

1 Answer

SPC-40 wont stay lit


Problem is either the thermocouple or the thermoelectric valve. I have one of these as well with the same problem. On mine it is not the thermocouple. I have replaced the thermocoupler and still have the problem. A thermoelectric valve is $42.25 at http://www.masterheaters.com/propane/
Im looking for a cheaper part. Any suggestions?
Gru es 1234 @yah oo.c om

Jan 12, 2010 | All-Pro Propane Garage Shop Heaters - All...

1 Answer

No heat


It is either the igniter or the limit. Their is a limit mounted
at the 12 o'clock position beside the igniter. If you look at this video you will see it. Well the base of it and 2 philliphead screws that hold it anyway. LOL

Check ot the video HERE

Jan 08, 2010 | All-Pro Propane Garage Shop Heaters - All...

1 Answer

Need allpro igniter


You should call Master Parts, they may have the part your looking for. You can contact them at 800-446-1446 or online at www.masterparts.net. I hope this helps...

Mar 03, 2009 | All-Pro Forced Air Kerosene Space Heater...

1 Answer

Webcam


vreau sa instalez webcam SPC200NC *** sa fac?

Feb 08, 2009 | Philips SPC 200NC Webcam

5 Answers

All-Pro SPC-85 Utility Heater


Check the thermocouple, it is a very small diameter copper wire that goes from the gas valve to the burner. Make sure it is being hit by the flame. If it is, remove it and go to a good hardware store with it and get a new one.

Jan 15, 2008 | All-Pro SPC-85 Utility Heater

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...