Question about Fujitsu LifeBook Notebook

Open Question

Won't boot; screen is blank

Product is Fujitsu n3510 laptop. Was watching video (Amazon instant video) when screen suddenly went blank. Would not boot. After several attempts, it booted and appeared to be operating normally; but, would not boot again after shutting down. I can hear the hard disk spin up when the power button is pressed ; but screen stays blank. Tried ctrl-f12, alt-ctrl-delete, etc. With no results. Power indicator led is on. HD led blinks momentarily sometimes.

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2961 Answers

SOURCE: Laptop starts then shuts down

As soon as you power up keep pressing F8 to get into safe mode. You will see a black screen with various options, go to Safe mode with networking, and see if your laptop stays on. If it does you should be able to go to the manufacturer web site and download latest graphic drivers, as this may be the problem. Download, then uninstal current graphics driver from add/remove programmes. Re-boot your pc and when it finds your graphics again ensure that you point windows to install the down loaded driver and not a generic driver. If you were not able to get this far, then a possible processor or motherboard failure is the answer; taking to a qualified repairer is recommended.

Posted on Dec 11, 2006

SOURCE: Fujitsu LIFEBOOK C1020 power problem

or a bfoken powr jack.I replaced mine recently for £4.00 and took approx 2 hours.

Posted on Aug 17, 2008

  • 357 Answers

SOURCE: During boot up the screen stays black

Sounds like a technical problem that cannot be resolved by messaging, take it to you nearest computer repair shop.
Good Luck.

Posted on Mar 15, 2009

SOURCE: Dead T4220 - 4 beeps @ POST & blinking lock symbol, screen blank

this beeps are signal of a dead cpu or memory. Check with manufacturer to confirm diagnostics.

Posted on Jul 08, 2009

  • 1 Answer

SOURCE: During boot up the screen stays black

i have the same laptop and same problem but when i power up the wireless light is on and the screen dosent come on but when i power up and the light deos not come on it works? but i think its nackerd now coz i hav bounced it off the wall a few times out of anger lol

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fujitsu Laptop gets a Blue Screen whenever I try to connect it to a projector

fujitsu laptop drivers update utility download it:

Feb 08, 2013 | Fujitsu Computers & Internet

1 Answer

My acer chromebook screen went blank suddenly

That screen will stay on and along the top of the screen you will see a percentage progress line of the repair in progress. (It will take around 4-5 minutes)

Jan 22, 2013 | Acer Cromia Chromebook PC Notebook

1 Answer

Can't access bios; win vista won't load.

To get to the Bios you need to press the F2 button during the Fujitsu Splash screen.

If all you get is beeping, then it sounds like a bad keyboard on your laptop (could be a stuck key). If an external keyboard does the same thing. I would reset the cmos (unfortunately the laptops have their cmos sodered on, theres youtube videos on how to do it for laptops)

Oct 26, 2012 | Fujitsu AMILO Computers & Internet

1 Answer

Nikon d40x suddenly stopped working- won't turn on- was working fine and when I connected it to laptop to download, it turned on , then suddenly went blank.

Do you get the 'push shutter button again' or 'turn off and on again ' message? If so the motor in the SQ unit that charges the shutter and moves the mirror up and down has failed. A very very common problem. The part is on constant back order at Nikon, and good luck getting it anyway as Nikon is going to stop selling parts to anyone in just a few weeks.

May 06, 2012 | Nikon D40x Digital Camera

1 Answer

( Dell xps m1530 laptop ) Monitor blank, powers up but screen won't come on.

It ISN'T the LCD screen. Since you diagnosed with an external VGA monitor, you now know the problem is the laptop.

(When you connect an external VGA monitor to a laptop, you are bypassing the Video Cable, and LCD screen. You are connected directly to the laptop )

The basic Windows files aren't being found. The boot files. This may mean a bad Harddrive.

Do you have the Restoration CD Disk? Laptop on insert it into the optical drive tray, close the tray.
When asked choose - Repair. (Non-Destructive Installation)

If a checkdisk is done, you have bad sectors on the harddrive.
There IS a special procedure in replacing a harddrive.

[ More information on Harddrives, ]


Feb 26, 2012 | Dell XPS M1530 Laptop

1 Answer

Fujitsu LIFEBOOK N3510 PC Notebook. The VGA CARD of my laptop is not functioning properly as the screen is showing all hazy and garbled words. I have reloaded driver,but did not help. What should I do...

Hook up an external monitor to the video output on the back of the laptop to see if the problem clears up, if it does you have screen issues on the laptop. If the same problem persists it is a Video Graphics Card problem on the motherboard.

Jan 04, 2011 | Fujitsu LifeBook Notebook

2 Answers

The screen went blank when I was using the laptop and know it won

You are experiencing power supply failure. The main board may not get the right power to boot up the devices. You need to refer your product to a qualified servicemen. Problem can be solved online.

Thanks. Cheers!

Apr 21, 2010 | HP Compaq nc6000 Notebook

1 Answer

Screen suddenly blank on FujitsuSiemens AmiloProFB21

I am thinking that the Video Resolution went off, so you have to try entering Safe Mode by pressing F8 until you get a menu in black and white...

Then, select Safe Mode. That would reset your video resolution.

Then, reboot the system and let it boot normal. See if it is fixed.

Jul 20, 2008 | Fujitsu AMILO Pro V1000 Notebook

Not finding what you are looking for?
Fujitsu LifeBook Notebook Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Computer Links

Level 3 Expert

2385 Answers


Level 3 Expert

2600 Answers

Are you a Fujitsu Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides