Question about Office Equipment & Supplies
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: error code c6400
The model of the copier is usually pretty important but try this and you should be up and running soon
type in 1087 1087
wait for the screen to show 000
type in 163 and hit the start button
you may seethe word execute on the screen (if so then select it and confirm with either the green button or the silver one)
this resets your fuser unit
if this does not work you will have replace parts in the fuser or replace the whole fuser unit
please take the time to rate this fix
Posted on Apr 23, 2009
Zero-crossing signal problem
The engine PCB does not detect the
zero-crossing signal for the time specified
below. At power-on: 3 s Others: 5 s
That is what the code means in the service manual. However you can try a reset by doing the following. Press 10871087 to enter maintenance mode. Once in maintenace mode press 906 then follow the steps below
1. Press the start key.
2. Select the EXECUTE using the up/down cursor keys. It is displayed in reverse.
3. Press the start key to reset partial operation control. The maintenance mode is exited, and the machine
returns to the same status as when the power switch is turned on.
If you do not feel comfortable performing this operation, or the problem persists then call a technician immediately.
Posted on Feb 04, 2009
In pallet install to limiters as is done on sectoring, but with inverse, distant sides install the plastic insertions as defined, there there is helps with instruction format.Good luck!
Posted on Sep 21, 2009
Tips for a great answer:
Feb 09, 2015 | Olivetti Office Equipment & Supplies
Oct 01, 2014 | Office Equipment & Supplies
May 11, 2014 | Olivetti Office Equipment & Supplies
Jan 26, 2013 | Cameras
1,329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: