Question about Aiwa F2000 20" TV

Open Question

Aiwa tv c2121ker fius failure

I got this problem at many time . i already replace ic TEA1507p and ic R7...what must check

Posted by on

3 Suggested Answers

511975
  • 2 Answers

SOURCE: sharp model 29V- FL250s

ac supply track check this ic ac pals track on resister 240k or470k &diode check this track

Posted on Jun 25, 2008

welcomejee
  • 10594 Answers

SOURCE: abnormal colour in aiwa tv ic noTA8759BN

You need to use Aiwa Service Remote to enter in service mode and adjust service data for red and Blue drive of CRT.
Do you have that remote and service data reference book of Aiwa tv ?

Posted on Oct 07, 2008

rhozel2010
  • 267 Answers

SOURCE: We are using AIWA TV with 21INCHES TV with a

the model you have given was assemble in the philippines, and i was the process engr. then. i will try to look on my kits if i do still have a spare system ic.

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 14 inches aiwa tv lost its program after switching of ...


Main system control memory IC damaged. Check and replace it. This is a very small IC; can be located very near to the main system control IC at the main board. Will look somewhat like this:
25995411-ifq0kaejo1zvzlkodxawjo0y-2-0.jpg 25995411-ifq0kaejo1zvzlkodxawjo0y-2-2.jpg 25995411-ifq0kaejo1zvzlkodxawjo0y-2-5.jpg
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Dec 06, 2015 | Aiwa Televison & Video

1 Answer

What seems be the problem of my aiwa 14 inch tv, thus it has something to do with tv system ic?


Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
Do a search by type in the brand name of your device at its search box.

May 24, 2014 | Aiwa Televison & Video

1 Answer

Aiwa tv 21inch white screen


Check and replace the chroma processor IC. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

Feb 14, 2014 | Aiwa Televison & Video

1 Answer

Error codes


Its main system control memory IC is damaged. Replace it with same number. This IC is a very small one, having 8 solder terminals, and can be located very near to the main system control IC. Usually start with a number 24C**. Check and replace it. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help.

May 17, 2013 | Aiwa TV-S2011 20"

1 Answer

We are using AIWA TV with 21INCHES TV with a


the model you have given was assemble in the philippines, and i was the process engr. then. i will try to look on my kits if i do still have a spare system ic.

Aug 04, 2009 | Televison & Video

1 Answer

Abnormal colour in aiwa tv ic noTA8759BN


You need to use Aiwa Service Remote to enter in service mode and adjust service data for red and Blue drive of CRT.
Do you have that remote and service data reference book of Aiwa tv ?

Oct 07, 2008 | Aiwa TV-S2011 20"

6 Answers

Aiwa A2119 Tv setting codes


Hi,

I have Aiwa A2119 model and I am facing sound problem, as all other things are working perfect but sound is automatically gone I don’t know why. Can you help to solve it?

your help will be greatly appreciated.

With regards,

Ash

Aug 14, 2008 | Aiwa F2000 20" TV

2 Answers

Sharp model 29V- FL250s


ac supply track check this ic ac pals track on resister 240k or470k &diode check this track

Jun 14, 2008 | Sharp 25R-S100 25" TV

1 Answer

Aiwa component no sound at all


Check your speakers first and then the audio output ics, if you are not a techie I'd suggest you to get it to an expert, or if you think you can manage trace the wires from the speakers, that goes to an ic, check the supply to that ic, if it is alright try changing it. Audio ic malfunction is not a costly problem, ics are not that costly.

Jan 25, 2008 | Sharp 27C-240 27" TV

2 Answers

Aiwa Tv sound menu is not coming


Aiwa A2119 21"TV

picture okay but no sound. service mode not function in remote control for rectification.How to get sound. My E mail ID is vattipl@yahoo.com

Dec 20, 2007 | Aiwa F2000 20" TV

Not finding what you are looking for?
Aiwa F2000 20" TV Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiwa Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

 Grubhead
Grubhead

Level 3 Expert

4751 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Are you an Aiwa Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...