Question about One For All URC-4605 Remote Control
Codes & instructions for one for all remote urc-4640b01 to sanyo tv, philips dvd player, rca vcr
SOURCE: ONE FOR ALL URC-4640B01 REMOTE
on the remote press tv once press and hold set until the LED blinks twice then release set enter 9-9-1 The led will blink twice aim the remote control at the tv and slowly alternate between pressing power and tv stop when the tv turns off to lock the code press and hold set until the led blinks twice
Posted on Oct 16, 2009
SOURCE: Need dvd code
0794 0795 0796 0797 0755
0717 0830 0856
Here is a link to the full list of codes:
Could not fine instuction manual. Will post information if I find it.
Hope this helps. :]
Posted on Dec 12, 2007
Tips for a great answer:
Jan 13, 2016 | Sanyo 42 in. LCD TV
Nov 01, 2015 | Philips Televison & Video
Sep 02, 2012 | Televison & Video
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer's Codes to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
Mar 07, 2011 | One For All URC-3021 Remote Control
Feb 13, 2010 | One For All URC-3021 Remote Control
Aug 10, 2009 | Symphonic WV806 DVD Player/VCR
Aug 02, 2009 | One For All URC-1050 Remote Control
May 11, 2008 | Emerson EWD2204 DVD Player/VCR
6,993 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: