Question about Arrow T25 Staple Gun

Open Question

How do I reassemble Arrow T50P heavy duty staple gun

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How do I refill a n Arrow heavy-duty staple gun?

Fixed the old-fashioned way. Went down to the hardware store and got the demonstration. Thanks.

Posted on Nov 14, 2009

  • 623 Answers

SOURCE: I cannot figure out how to load an Arrow T50P

Turn it upside down. On the end opposite where the staple comes out look for a tab on each side you squeeze to release the staple holder, the staples go in to this holder upside down as well, just push it back in until the releases catch and hold it in. Hope this helps.

Posted on Jun 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loading staples into a Stanley sharpshooter staplegun


There are 4 staplers in the Stanley SharpShooter family. You drop the staples on top of the "slide out loader," then slide it into the gun. See models and staple sizes below:


TR150HL Stanley Sharpshooter
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples

TR150 SharpShooter
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples

PHT150C SharpShooter Heavy Duty Hammer Tracker
  • TRA700 series or Arrow T-50 heavy duty staples (1/4"-3/8")

TR250 SharpShooter Plus Heavy Duty Staple/Brad Nail Gun
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples and 1/2", 9/16" and 5/8" Brads

More information on the Stanley SharpShooter and a quick loading demo can be found here: http://www.expotv.com/videos/reviews/12/134/StanleyTR150HLSharpShooterHeavyDuty/185661

Sep 11, 2012 | Stanley Proto Stanley TR150HL SharpShooter...

1 Answer

How to load staples?


    • 1 Push in the push rod plate on the back of the Arrow T50P and press down to unclip the push rod from the gun. Pull the push rod out of the staple channel and away from the staple gun.
    • 2 Insert a strip of staples into the channel with the tips of the staples pointing toward the bottom of the staple gun.
    • 3 Place the end of the push rod into the staple channel of the gun. The end of the push rod has a small, solid piece of metal that fits into the staple channel.
    • 4 Press the rod all the way into the staple gun until the rod plate engages in the notch at the rear of the gun.

Jun 26, 2011 | Arrow T50P ARROW STAPLE GUN

1 Answer

The info on the gun says it will shoot many different staples, but it will only take 3/8 staples and I need to use 1/2 staples to do the job.


The T50P stapler uses T50 staples of various lengths, including 3/8, 7/16, and 1/2. Is it possible that the 1/2 inch staples you are trying to use are not T50? All T50 staples are the same width and should fit your stapler. There are several other widths of staples that are not T50, although T50 is the most common.

Nov 29, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

I cannot figure out how to load an Arrow T50P staple gun


Turn it upside down. On the end opposite where the staple comes out look for a tab on each side you squeeze to release the staple holder, the staples go in to this holder upside down as well, just push it back in until the releases catch and hold it in. Hope this helps.

Jun 17, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

Arrow T50P gun jammed - how do you unjam it?


Buu a different brand or model this one is junk and should be taken off the shelf

Feb 06, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

Do I need to adjust the T50P to use short staples (like 6 mm). It is not working at all. The staples just pop off the surface. The 12mm are just barely going in to a wood chair frame I am working on.


You MAY need to lube the stapler. Use ONLY staples labelled for use in this stapler. Also check if there might be a smashed staple blocking the driver from doing a full stroke.

Jan 09, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

My arrow staple gun jams every few staples even thought it has a ''jam proof mech''


no sutch thing as jam proof hehe.
just squirt some oil in the gun and you should be good to go.

Nov 10, 2009 | Arrow T50P ARROW STAPLE GUN

1 Answer

Is the Ace Hardware #22084 Staple Gun the same as Arrow T-50 ?


Found a friend who had an Arrow T-50 stapler and compared staple sizes - not the same.

Feb 17, 2009 | Arrow T50P ARROW STAPLE GUN

Not finding what you are looking for?
Arrow T25 Staple Gun Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arrow Tools & Hardware - Others Experts

JOHN LAPIER

Level 3 Expert

2422 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Arrow Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...