Question about Computers & Internet
I was copying a file to my sd card and pressed the zip by error and can"t undo it!
Seems you already tried and filled the keyboard buffer as in you are not able to go to task manager or use CTRL-ALT-DEL. Most likely it is a loop and will never come out of it. Instead of pulling the SD card out I will try to force power cycle by pressing the power button for few seconds. Before it power cycles take the card out and let it boot.
Just my 2c based on information you provided. Good Luck!!
Posted on Jan 07, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: sd card reader
Have you tried downloading the drivers for your SD card reader? You can obtain them for your laptop from the Toshiba download site here. Once you install the updated drivers, it will probably solve your problem. If not, leave a comment and I will try to help further.
Posted on Jan 15, 2008
SOURCE: Acer notebook 5920G
Hi Eddie & Roger:
Your solution is here:
Take care and good luck to both of you.
Posted on Feb 09, 2008
SOURCE: can't unzip .zip files
Scan your computer for viruses, uninstall the programs which are associated with zip files.
Download CCleaner, install and clean the temp files, temp internet files and registry (when it asks you if you want to back up to the registry select yes)
CCleaner here >>>>>>>
Once you have done this restart the PC, download winrar, install it and try to unzip a zip file
Please post back with the results and more help if needed, good luck and thanks for using FixYa!!
Posted on May 20, 2009
SOURCE: i can't figure out how
Use a computer that has WinZip or any other unzip programs. Unzip the update and put all the unzipped files onto the SD card. Click on this link or copy and paste the complete link into your browser. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, Joe
Here is a link for a free unzip program:
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Posted on Jan 27, 2011
Tips for a great answer:
Jan 09, 2016 | Samsung Galaxy Note 4G
First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link7210c file and install it to C / programme files/pheonix..after finished this installation open pheonix Inside the interface at the> left top File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck
Jul 13, 2011 | Nokia 7210
a. Replace adlmact_libFNP.dll and adlmact.dll with the ones (version 18.104.22.168 and 22.214.171.124) in the unzipped folder.
b. Replace adlmint_libFNP.dll and adlmint.dll with the ones (version 126.96.36.199 and 188.8.131.52) in the unzipped folder.Note: Most products put this file under the root folder of "\Program Files\Autodesk\#Product name#\" i.e. AutoCAD2014, but some other products put this file under subfolder, i.e. Inventor /Alias in \Program Files\Autodesk\#Product name#\Bin folder.
c. Confirm and if necessary replace FNPLicensingService.exe with the one in the unzipped folder to avoid file version incompatible issue.
6. Launch your products.
Mar 20, 2011 | Autodesk AutoCAD 2010
Jun 09, 2010 | Microsoft LifeCam VX-3000 Web Camera
Mar 01, 2010 | Genius VD3000022 Webcam
Dec 17, 2009 | Fujitsu Siemens AMILO Pro V2010 Notebook
Sep 06, 2008 | Acer Aspire 5102WLMi Notebook
May 21, 2008 | RCA OPAL M4001 MP3 Player
Mar 11, 2008 | Brother IntelliFAX 4100 Laser Fax
29 people viewed this question
Usually answered in minutes!