DVD F895 What is above problem, which is being shown by display of Panasonic DVD and TV monitor is showing 'Jumper play(Set-up) Error'

Are you trying to record from a broadcast signal, or via one of the SCART inputs? The E55 has an analogue tuner. If the TV companies in your part of the world have switched to digital broadcasting, the E55 can ONLY be used to record via the SCART and other video inputs, the tuner won't receive anything

really? that's a settings issue..open up the menu(got a manual with this item?) and reset for defaults.

You need to pull out the manual. The settings are related to the INPUT to the TV. You must select the DVD-CD settings from the Menu and switch from the TV setting to DVD.

Plug and Play Error? Check and see what CD/DVD Device you have connected. An 8200 uses Either SATA Connectors or IDE (WIDE GRAY CABLE) to connect to the hard disk and the Optical Drives. You may also want to check the jumper settings on the CD/DVD Drives. You will see if it's been set to "Cable Select," which is AUTO for most Dell computers. Dell OptiPlex and Dimension computers can be tricky so try "Cable Select" first. If you have TWO cd/dvd Drives in the PC, you have to have one SET for "master," and the other one to NOT HAVE A JUMPER AT ALL. Dell computers just work weird that way.

Consult the owner manual for the player (and or try it on another set) as many players have settings that can cause B&W or a single color display for the image.

While playing your movie in your PC, change the screen resolution to lower, and then check your television. The error is in the playing format which your HDTV cannot play while receiving the video signal, which could be of very high resolution or also can be very lower. Try to adjust it, also check your media player properties, might be its conflicting, or some setting should needed to set-up.Check thoroughly for best results.

Hi and welcome to FixYa,

Unfortunately, size limitation of what could be attached prevents posting a connection diagram. Still, proposed connection scheme:

• 4250HDC's HDMI to Panasonic's HDMI 1 or 2;
• 4250HDC's VIDEO OUT to GoVideo's LINE IN 1 VIDEO;
• 4250HDC's AUDIO OUT to 2 pcs of RCA Splitters (shown below);
• 1 pair from the 2 splitters to GoVideo's LINE IN 1 R-AUDIO-L;
• the other pair to Yamaha's LD/TV L & R;
• GoVideo's LINE OUT VIDEO to Panasonic's VIDEO IN 1 VIDEO;
• GoVideo's LINE OUT R-AUDIO-L to 2 more RCA Splitters;
• 1 pair from the 2 splitters to Panasonic's VIDEO IN 1 L-AUDIO-R;
• the other pair to Yamaha's VCR 1 IN L & R;
• to watch cable TV in HD quality, set Panasonic to HDMI 1 or 2 by pressing Panasonic remote's INPUT button, then 3 (or 4), then OK;
• to hear cable TV programs on Yamaha's speakers, set Yamaha to LD/TV;
• to watch DVD or VHS, set Panasonic to Video 1 by pressing Panasonic remote's INPUT button, then 6, then OK;
• to hear DVD or VHS on Yamaha's speakers, set Yamaha to VCR 1;
• to record cable TV programs, press GoVideo remote's TV VIEW button a couple of times to cycle through the signal sources or until Line 1 is displayed.

The use of the splitter shown below would effectively double the AUDIO OUT of the cable box and the DVD/VCR combo to feed both the TV and the stereo. Additionally, this would allow use of the cable box and/or the DVD/VCR combo with or without the Yamaha.

or

or



Good luck and thank you for asking FixYa.

any what pray are we supposed to deduce from this?

DVD F895...

Please be specific when asking questions or requiring our service we are not mind readers. We would like to help you solve your problem but cannot do this if you don't supply the details.

Thanks for using FIXYA

If you have not already seen this or done it - it worked for us:

On page 18 of the user manual under Progressive scan there is a Caution which says - If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "dISC " is displayed on the display window. 2) Press STOP (9) and hold it for more than five seconds before releasing it. The video output will be restored to the standard setting and a picture once again be visible on a conventional analog TV or monitor.

Hi,

Apologies for the delay in response. Your concern was just brought to my attention.

To your recording, based on your second posting (and would appreciate corrective information where applicable), your system is:

• Cable provider > Cable Decoder Box > Panasonic DMR-E75V > TV (equipment setup)
• single coaxial cable > yellow, red & white > yellow, red & white (wiring setup).

With your indulgence, a couple clarifying questions:

• to watch the Panasonic when you play DVDs, to what channel or source or setting must the TV be set to?
• to record a TV program/channel, to what channel or source or setting must the Panasonic be set to?
• what is the brand and model of your Cable Decoder Box?

Initially, pls try:

• play any known good DVD disc/movie. power on the TV and set to watch said movie;
• without changing anything on the TV, STOP the playing of the DVD;
• try changing channel on your Cable Decoder Box's remote;
• pls post back result(s); or
• do the above steps again but before changing the channels on the decoder box's remote;
• try changing/cycling through the different input/source of the Panasonic DVD;
• again post back result(s).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.