Question about Sole Fitness F63 Treadmill

1 Answer

Speed memory speed too slow

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sole Fitness Master
  • 12,223 Answers

Run the softwARE calibration for test the machine speed.
God bless you

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

  15. If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step.

Posted on Jan 08, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Janome memory craft model 9000 sewing machine is now sewing at one slow speed. The quality of the stitch is good but too slow what should I look for?


Your speed slide sensor is bad. Your local repair shop can fix it. There is a chance it's the foot pedal. If it's still slow when you sew without your pedal, then it's the sensor.

Feb 25, 2015 | Janome Sewing Machines

1 Answer

PC


First, your pc5300 memory runs default at 6300Mhz, not 333. Perhaps your motherboard Front Side Bus line is 333 in which case the memory will drop to that speed, but if the FSB and memory match speed, then it would run at 6300. Since you have an older unit, I would suppose you are running only 333, and that is average speed for that config. In addition, you are only running 1 gig RAM, which is woefully inadequate for Windows 7, so everything you do is going to be slow.

Jul 29, 2013 | Kingston Technology RAM Modules...

1 Answer

Slow download on Netflix. Sony Blu-ray


you must shure if you have enough or large program consuming a) disk drive b) enough memory.
I am recommending to eliminate large program for to recover hard disk space b) use some utilitity for recover memory c) use utility software for to speed download, they in internet shareware .
God bless you

Jul 31, 2012 | Televison & Video

1 Answer

Shiba satellite l745-s4210 video perormence slow,bt the needed driver is already instal,how can i solve this?


You might have a virus or infection that is making it slow, but I don't think that's your issue.

Maybe you need to increase your RAM Memory.

When you play a DvD on your DvD Drive does it go slow, and stall? If not then you probably have enough memory, but memory is always good.

If this is happening when you watch a video on the internet from a website then the problem could be high traffic on the website. To see if that's the problem try the site late at night or early in the morning.

Also if it is happening when you are looking at a video online then maybe your line speed is slow. Some phone company internet service providers such as AT&T sell different line speeds for internet usage. If you buy the low end line speed then you will have problems doing downloads, uploads and streaming videos or movies.

May 13, 2012 | Computers & Internet

1 Answer

The netbook freeze or go slow motion when I watch a move


The problem could be any one of the things mentioned below.

1) It could be that you need more memory. Check you laptop to see what is the maximum amount of memory it will hold and if you can upgrade it to more then do it. Click Start/Control Panel and look for System or System and Performance. Click it and it will tell you how much memory you have. You can go to the website of: http://www.4allmemory.com to see what is the total capacity your computer will hold.

2) It could be that the site you war watching the movie from is experiencing heavy traffic or their site is just slow. When you watch a movie in your dvd player does it stall? If it does it's your computer and you need more memory or you might have a virus or infection that is causing it to be slow and freeze.

3) Some internet service providers have different line speeds and you might have a slow line speed. For example, AT&T sells different line speeds and if you purchase the low end (cheapest) then your download and upload speed will be very slow. If you are watching movies online then the streaming (downloading) to your computer could be impacted by the slow line speed.

May 12, 2012 | Acer Aspire One PC Notebook

1 Answer

The move freeze or go slow motion when I watch a move connect to the TV


The problem could be any one of the things mentioned below.

1) It could be that you need more memory. Check you laptop to see what is the maximum amount of memory it will hold and if you can upgrade it to more then do it. Click Start/Control Panel and look for System or System and Performance. Click it and it will tell you how much memory you have. You can go to the website of: http://www.4allmemory.com to see what is the total capacity your computer will hold.

2) It could be that the site you war watching the movie from is experiencing heavy traffic or their site is just slow. When you watch a movie in your dvd player does it stall? If it does it's your computer and you need more memory or you might have a virus or infection that is causing it to be slow and freeze.

3) Some internet service providers have different line speeds and you might have a slow line speed. For example, AT&T sells different line speeds and if you purchase the low end (cheapest) then your download and upload speed will be very slow. If you are watching movies online then the streaming (downloading) to your computer could be impacted by the slow line speed.

May 12, 2012 | Acer Aspire One AO532h-2727 Netbook

1 Answer

Video slow


You probably need more memory.

If you place a dvd in your drive and play it does it play slow and stall? If so you need more memory. If not then the site you are streaming the video from might be slow or have heavy traffic.

Your internet service provider might have you on a slow line speed. AT&T has different line speeds for their customers. If you purchase the lowest priced package then your line speed will be very slow on downloading and streaming.

May 06, 2012 | HP Pavilion ZE5730 Notebook

1 Answer

Sony VAIO vgatz750p has problems plating video. Playback is in almost slow motion and choppy


You probably need more ram memory. Also try playing a video in your dvd player. If it plays slow and choppy you definitely need more ram memory.

If you are trying to play a video from a website (streaming) then three things can affect how smooth it plays.
1) Memory - your ram memory might be low
2) The website might be experience heavy traffic from many users.
3) The Line Speed of your internet connection from your service provider might be slow. For example: AT&T sells about 3 or 4 different packages and each one increases the line speed for uploading or downloading. If you buy the low end package the line speed is very slow on uploading and downloading or streaming. It's ok for just surfing, but nothing else.

May 05, 2012 | Sony Computers & Internet

1 Answer

Extremely slow printing


The printer is an inkjet printer. Inkjet printers are slow printers compared to laser printers.

Also the print speed depends on the size of the document printed.
If it is a large photo or file, it will take longer than small notepad file.

Speed also depends on coverage. A page with a lot of it covered in ink, will take longer than a page which is only coverd in ink on a small part.

Also the print speed depends on computer memory and USB cable. Fast cable and a lot of memory mean fast transmission of data to the printer.
Slow cable and small amount of memory (512Mb, or 256Mb or less) mean slow transmission of data to printer

Sep 17, 2010 | HP Deskjet D4260 Printer

1 Answer

Very slow


you can improve speed by closing up applications running on background by pressing menu key for few seconds.You must clean up the call records & memory for boosting the speed.

Apr 04, 2008 | Nokia 7610

Not finding what you are looking for?
Sole Fitness F63 Treadmill Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sole Fitness Exercise & Fitness Experts

Art Wilson
Art Wilson

Level 1 Expert

20 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Are you a Sole Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...