- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I cant detect my pics in my laptop from the sd cars. But I can see in my camera when I insert the same sd card. Is there any problem with sd card or any virus effected? How to upgrade the sd card. please help me out.
Reset the menus to default or factory settings. Then test the camera again. Make sure that the battery is fully charged or new. You might consider to buy a new battery (Ebay is a good place) for this camera. Then test. Problems like this can show up when the battery is weak or not fully charged. You may try to remove the battery for 24 hours and then after try it again.
TTTTTTTTTTTTTTTTTTTTTTTTITf correct focus cannot be obtained
When the subject to be focused is not on the AF target mark (not positioned
in the center of the composition), you can use the following steps to obtain the
correct focus on the subject. This operation is referred to as "focus lock".
Determine the position of the subject after focusing (Focus Lock)
1 Press the power switch.
• The camera turns on in the shooting
• The lens extends and the monitor turns
• The orange lamp lights.
2 Turn the mode dial and select a
"Shooting mode" (P.36)
3 Position the AF target mark on
the subject you want to focus on.
• When shooting a hard-to-focus
subject, point the camera at an object
about the same distance away as the
Press the shutter button halfway
until the green lamp lights.
• When the green lamp lights steadily,
the focus and the exposure are locked.
• When the green lamp blinks, the focus
and exposure are not locked. Release
your finger from the shutter button, reposition
your subject and press the
shutter button halfway again.
5 Keeping the shutter button
pressed halfway, recompose
6 Press the shutter button fully.
Try the above, info from D-535, C-370 and X-450.
I can email you the complete manual if this works.
The key means that the picture is locked so you can not erase by accident. You need to remove the key be for you can erase the pic. If you have the manual it will tell you how. if not get me the model of camera and I will get you a manual.
Hello, I went and researched a few points in the manual and hope this helps to some extent. If this doesn't help, try resetting your camera by removing the batteries for 30 seconds, then reinstalling them and turning on the camera again. Monitor is blank: • Camera is off. • Batteries are not correctly inserted or battery-chamber cover is not properly latched. • Batteries are exhausted. • EH-62B AC adapter (available separately) is not properly connected. • Camera is in sleep mode. Press shutter-release button halfway. • Monitor is off. • USB cable is connected. • AV/Video cable is connected
No picture is taken when shutter release button is pressed:
• Camera is in playback mode. • Batteries are exhausted. • Red (!) lamp flickers: flash is charging. • Green (AF) lamp flickers: camera unable to focus. • Message "CARD IS NOT FORMATTED" appears in monitor: memory card is not formatted for use in your camera. • Message "OUT OF MEMORY" appears in monitor: insufficient memory to record picture at current Image Mode selection.
There are 2 probable solutions.
1. The images are "protected" by the camera & will show "locked" when you try to erase them.
2. The SD card in the camera is locked.
The solution to 1 is to unlock the images in the playback menu. See page 45 of the manual.
Solution 2 is to remove the card from the camera & check the "lock" slider that you can see on the side (although no all cards have this). Set the lock off.
You can download the manual from the first link on the following page:
The Olympus CR-V3 lithium batteries will provide approximately 500 shots with typical usage (half of the images shot with flash/half without flash and minimal use of the LCD monitor). These batteries are not rechargeable.
The Olympus Ni-MH batteries will provide approximately 200 shots with typical usage (half of the images shot with flash/half without flash and minimal use of the LCD monitor). These batteries are also rechargeable.