Question about Craftsman Grinders
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Bench Grinders Safety issues
Goggles or safety glasses need to be worn to protect the operator's eyes from the sparks and metal filings that result. Depending on the workpiece and time of exposure, hearing protection may also be required, the dust produced is also potentially hazardous. The toolrest (or workrest) should be mounted slightly below the center of the grinding wheel with less than 3 mm clearance from the wheel. This prevents the work from jamming between the toolrest and the wheel. Grinding wheels designed for steel should not be used for grinding softer metals, like aluminium. The soft metal gets lodged in the pores of the wheel and expand with the heat of grinding. This can dislodge pieces of the grinding wheel. Wire brushes require particular attention for the safety of the operator and bystanders as the metal wires may become dangerous projectiles as they could bind with the object being brushed and so throw it away with great energy. The machine needs to be securely mounted to a pillar or a bench to be used safely and effectively, often with an emergency stop switch or pedal fitted close by the machine, for use in emergencies.
Posted on Aug 27, 2008
Replacement should be simple. Just do a one for one hookup with the new part, after you unplug it first.
For a diagram go to;
Posted on Mar 28, 2009
Your grinder is listed on page 3085 of the Grainger catalogue. The part number for the eyeshield is 00281.00 and the number for the lower eyeshield bracket is 00280.00. The right hand upper eyeshield bracket is number 25188.00 and the upper left hand bracket number is 25177.00. All of this can be ordered through Grainger at 1-800-323-0620. Marvin T.
Posted on Jan 13, 2010
Testimonial: "This was very helpful. I have ordered parts from Grainger. Thank You."
Here's a link to download the pdf.
If it doesn't work, start here:
Posted on Mar 02, 2010
I would try and call Grainger parts to see if they have one. I know they deal with and sell Dayton equiptment. If no luck let me know and I will try and find another source.
Posted on Mar 25, 2010
Tips for a great answer:
Dec 01, 2017 | Cars & Trucks
Jan 20, 2016 | Electrical Supplies
Jan 12, 2016 | Sewing Machines
Oct 18, 2015 | John Deere Cs36le And Cs40 Chain Saw...
May 11, 2014 | Mtd Products Yard Machines 158CC Tiller
Sears. In the lawn and garden service department.
Jul 06, 2013 | Craftsman Lawn Tractor Operators Manual...
Nov 22, 2011 | 2006 Volkswagen New Beetle
May 09, 2010 | Office Equipment & Supplies
Feb 04, 2018 | Garden
Mar 30, 2013 | Craftsman Grinders
Nov 05, 2012 | Craftsman 6" Bench Grinder with Lamp
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: