Question about Xerox DocuColor 1632 Laser Printer

1 Answer

Xerox Docucolor 2240 - says the fuser needs replacing, and I have a spare used one, but no docs on how to do it. Any ideas? Also it says I need a new "transfer belt cleaner" - can this be done easily, or am I looking at someone coming in to do this? Thanks!

Posted by on

  • barto910 Feb 03, 2009

    Sorry, the 9 & # thing doesn't work on this one. I get 3 very quick beeps when I press them, doesn't matter how long I hold the buttons down. I also tried it on some other screens, including the consumables screen that indicates that the fuser needs replacing.

    Thanks for trying - let me know if you have any other suggestions!

    Bart


  • barto910 Mar 19, 2009

    Meant to reply to this earlier, but the "9" and "AC" together worked GREAT- **thank you** for that suggestion!

    Still looking for info on the transfer cleaner belt replacement & counter reset - anyone?

    Bart


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

After normal start up press and hold 9 and the # key together after a few seconds it will ask if you have installed a new fuser just hit yes and you r done.

The tranfer cleaning belt is easy to replace just two screws but you have to clear the consubable life couner this is where i ame haveing problems it can be done but i dont know how if you find out post back here and let me know.

Posted on Jan 28, 2009

  • bgcarter Feb 03, 2009

    sorry my mistake it is the 9 and the AC key sorry.

  • bgcarter Feb 03, 2009

    if anyone know how to reset life counters for these machines i would be greatfull.

×

1 Suggested Answer

  • 19 Answers

SOURCE: Xerox Docucolor 2240 - how to change fusers & xfer belt cleaner?

I am not familiar with that particular model Xerox but generally speaking Xerox maintenance is more difficult that say your average HP, Lexmark, etc. I would call a service professional if I were you

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model 7665. What do fusher system errors 10.311.00 and 10.322.00 indicate?


Both of those indicate a defective fuser, replace fuser, part number 008R12988.

http://www.iteminconline.com/008r12988_008r12988-8r12988-622s00044-622s44-xerox-docucolor-250-fuser-assembly-110v-compatible-with-docucolor-240-250-workcentre-7655-7665-7675-7755-7765-7775-new.htm

Jan 10, 2016 | Xerox Printers & Copiers

2 Answers

Xerox 5225 fault code 010-320???


If you have a Xerox WC5225 with Error Code 010-320, then you have a fuser problem. The fuser is the heated item which bonds the image, just before it exits the unit. The machine monitors the temperature sensors and heating elements on this part.
The fuser is sold as PN 126K24980. It is easy to replace yourself.
Whit Item, Inc. wrinaldo_6.jpg

Nov 23, 2010 | Xerox DocuColor 3535 Copier

2 Answers

Xerox docucolor 1632 fault code: 004-341 the printer doesn't print at all


Try reseating the waste toner then all 4 drums, see if the chips are mating.
Most likely either the machine software is corrupted and needs to be reloaded, or the MCU board has failed, could also be a bad laser, called the ROS.

Jan 02, 2010 | Xerox DocuColor 1632 Laser Printer

1 Answer

I need the diferences between docucolor 12 and xerox 7132? please


Pretty vague question.
The Doc 12 probably has a Fiery Network controller, while the 7132 has a Fuji/Xerox controller.
The Doc 12 would have limited scanning capabilities while the 7132 can, depending on the config ordered, scan to E-mail, SMB, FTP, Scan to PC, and scan to a mailbox on the Xerox itself. If you have an embedded fax in the configuration, you can set it to catch incoming faxes and forward to e-mail, or a SMB or FTP folder on your PC or server.
The 7132 is rated at 8 pages a minute in color mode, and 30 pages a minute b&w.
The Doc 12 has been around since 2002, the 7132 is about 3 years old and has been replaced by the 7232.

Jun 23, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

Xerox Docucolor 2240 - how to change fusers & xfer belt cleaner?


I am not familiar with that particular model Xerox but generally speaking Xerox maintenance is more difficult that say your average HP, Lexmark, etc. I would call a service professional if I were you

Jan 20, 2009 | Xerox DocuColor 1632 Laser Printer

1 Answer

Doc 12 fuser oil leaking


It needs to have the fuser taken apart and rebuilt.
There are wicks and wiper blades that wear out.
Then they do you get excessive oil on the paper and
pretty much everywhere.
If your doing it yourself I can provide you a good and reliable vendor.

Apr 07, 2008 | Xerox DocuColor 12 Printer

3 Answers

Docucolor 12 spills fuser oil


Pretty much all you can do is rebuild the fuser, either the meterins blade or wick are work out.

Mar 19, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

Docucolor 12


Do you need a part number for that? Is that what your asking?
You can go to a site
https://www.partsdrop.com/store/
And see what they have under Doc 12s. If you cant find it on the site, call them at the number on the site and talk to Britt.
Or Joe.
They most likely can help you.
I just am not 100 percent sure what your asking for.
try this site ok. I deal with them several times a month and they will help you out.

Jan 11, 2008 | Xerox DocuColor 12 Color Copier

Not finding what you are looking for?
Xerox DocuColor 1632 Laser Printer Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...