Question about DISH Network Televison & Video
None of the codes listed in the dish book will work.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: NEED CODE FOR RCA TV
I'm not sure what the exact code is but here's an alternative:
1. Manually turn on the device (TV, VCR, etc.) to be
2. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
3. Press and quickly release the desired mode button
(TV, VCR, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing CHANNEL UP changes
direction to forward again.
5. Press and release MUTE to install the code.
Posted on Nov 19, 2007
Well I know this is a few months late but go to www.rca.com/codefinder to find the codebook. Usually the model number of your remote control is on the inside of the back lid. Just take it off and flip it over.
Posted on Sep 01, 2008
Since the Funai code does not work, you have to use the CODE SEARCH feature.
The remote may already be set up to operate your brand of TV, VCR, Laserdisc, Satellite Receiver, Audio Equipment, or Cable Box. It is pre-programmed with the following codes: TV-000, VCR1-000, AUDIO-003, and SAT•Cable Box-000. For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.
Programming a Device using CODE SEARCH
1. Manually turn on your device (TV, VCR, Laserdisc Player, Satellite Receiver, Cable Box or Audio Equipment).
2. Press and hold CODE•SRCH.
3. Press and release the device button you want to set up (TV, VCR1, VCR2•LD, SAT•CABLE, or AUDIO).
4. Release CODE•SRCH.
5. Press POWER repeatedly until the device turns off (you may have to press up to
6. Once the device turns off, press and release ENTER.
7. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond,
repeat steps 1-7.
Programming Your Universal Remote
Posted on Nov 17, 2008
Tips for a great answer:
Sep 18, 2014 | Toshiba 50L5200 50-inch LED TV
Nov 30, 2010 | Emerson LD195EM8 19 in. LCD TV
Feb 19, 2010 | Universal Remote Control DISH Network...
We would be happy to help you with getting your DISH Network remote to control your RCA TV. We're going to start by pressing and holding the TV button located on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your RCA TV here are some of the codes we currently have: 503, 627, 633, 725, and 505. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your RCA TV until you find one that is compatible with it.
We hope this helps and thank you for being a valued DISH Network customer!
DISH Network Customer Service Representative
Feb 11, 2010 | RCA DISH Network(r) 311 Satellite System
Nov 24, 2009 | Computers & Internet
Nov 07, 2009 | Universal Remote Control P000203220-1...
Jun 26, 2009 | RCA L32HD31 32 in. LCD HDTV
Jan 12, 2009 | Televison & Video
Jan 06, 2009 | One For All URC-3605 Remote Control
Aug 26, 2017 | DISH Network Televison & Video
249 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: